Editorial board
Editor-in-chief
Régis DUFOUR
INSA Lyon, France, Dynamics of Structures
Associate Editors-in-Chief
Renée GATIGNOL
Univ. P & M Curie Paris, France, Fluid mechanics, Turbulence, Two phase flows, Rarefied gas
Michel FILLON
CNRS-Univ. de Poitiers, France, Tribology, Lubrication
Fabrizio SCARPA
Univ. Bristol, UK, Smart structures, nanomaterials
Steffen VALDER
Univ. Federal Uberlandia, Brazil, Dynamics of structures
Associate Editors
Pedro-José ARRAZOLA
Escuela Politécnica Superior de Mondragon Unibertsitatea, Spain, Research Coordinator in Manufacturing
Jack BRAUN
Univ. of Akron, USA, Flow and seal modelling
Patrick CHABRAND
Université d'Aix-Marseille, France, Biomechanics
Abhijit CHANDRA
Iowa State University, USA, Material and Manufacturing Process
Jean-Camille CHASSAING
Institut Jean-Le-Rond d'Alembert, Paris, France
Yvon CHEVALIER
Supméca, Paris, France, Mech. Engineering Dynamics
Arild CLAUSEN
NTNU – SIMLab, Trondheim, Norway, Dynamic different types of structures
Jean-François DEÜ
Conservatoire National des Arts et Métiers, Paris, France, Structural Mechanics and Coupled Systems Laboratory
Mohammed El GANAOUI
Univ. de Limoges, France, Computational Fluid Dynamics. Heat transfert Laboratory
James GAO
University of Greenwich, Chamtam Maritime, UK, Intelligent manufacturing technologies and systems
Luigi GARIBALDI
Politecnico di Torino, Torino, Italia, Dynamics & Identification Research Group
Arnaud GERMANEAU
Institut Pprime, Université de Poitiers - ISAE ENSMA, France, Mechanical behavior of structures, Biomaterials
Kostandin GJIKA
Senior Fellow at HTT, Nancy, France, Industrie automobile
Grigoré GOGU
IFMA Clermont-Ferrand, France, Robotics, Mechanisms
Gilbert HENAFF
ISAE-ENSMA Institut Pprime, France, Fatigue of materials and structures, Corrosion
Marcel LACROIX
Univ. Sherbrooke, Canada, Thermodynamics, Heat transfert, Energy conversion & management
Henri-Paul LIEURADE
SF2M, Paris, France, Fatigue, Fracture Mechanics, Joining
Stepan Vladimirovich LOMOV
Universiteit Leuven, Belgium, Structural mechanics of textiles
Jean-Luc LOUBET
Président de l’institut Carnot Ingénierie@Lyon, Lyon, France
Francesco MASSI
University La Sapienza, DIMA – Department of Mechanical and Aerospace Engineering, Rome, Italy
Anna A. OKUNKOVA
Moscow State University of Technology “STANKIN”, Russian Federation
Roger PRUD'HOMME
Univ. P & M Curie, Paris, France, Fluid Mechanics, Combustion,
Christian REY
ENS Cachan, France, Computational in structural and solid mechanics
Hubert SCHWARZE
TU Clausthal, Germany, Contact Mechanics and Structural Dynamics
Zhan-Hua SILBER-LI
Institute of Mechanics, Beijing Laboratory of Nonlinear Mechanics, PR China
Weihong ZHANG
Northwestern Polytechnical University, Xian, PR China
Resigned Editors
André BIGNONNET
Ingénieur Conseil, Angers, France, Material and manufacturing processes
Catherine COLIN
IMFT Toulouse, France, Two-phase flow, fluid mechanics, boiling, heat transfer
Wilfried EICHLSEDER
University of Leoben, Chair of Mechanical Engineering, Leoben, Austria
Evgeni FEDOROVICH
School of Meteorology, University of Oklahoma, Norman, USA
Donatien LE HOUEDEC
Haute Goulaine, France
Ivan IORDANOFF
ENSAM Bordeaux, France, Tribology. Manufacturing processing
Jian LU
Hong Kong Polytech., Kowloon, Hong Kong
Gary B. MARQUIS
Chairman - IIW Technical Management Board, AALTO, Finland
François MOUSSY
Renault, Vaucresson, France
Odile PETILLON
GIE EADS CCR, Suresne, France
Fabrice PIERRON
Arts et Métiers ParisTech, Châlon en Champagne, France
Jean-Philippe PONTHOT
Université de Liège, Liège, Belgique
Claude REY
Université d'Aix-Marseille, France
Jean-François SIGRIST
DCNS, Nantes, France
Editorial Office
Christine SAJOT
AFM - Maison de la Mécanique
39/41 rue Louis Blanc
92038 Paris la Défense Cedex - France
Tel: +33 1 47 17 60 74
Fax: +33 1 47 17 62 51
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.