Instructions for authors

Download EndNote style file for Mechanics & Industry.

1. General

1.1 Conditions of acceptance of a submission

Submission of a manuscript implies that the work has not been published and is not submitted for publication anywhere else. Publication must be approved by all authors. Authors should accept publication fees. For ethics in publishing consult COPE and recommendations e established and made available by the International Committee of Medical Journal Editors (ICMJE) at:, polices established by the Council of Science Editors (CSE), World Association of Medical Editors (WAME), Directory of Open Access Journals (DOAJ) and others.

1.2 Authorship

All the authors must meet the criteria described at Those contributors who do not meet all these criteria shall be acknowledged.

1.3 Conflict of interest

Authors must disclose whether they have a financial relationship with the organization that sponsored the research. They should also state that they have full control of all primary data and that they agree to allow the journal to review their data if requested.

1.4 Publication fees

For the subscription model journal, there are no charges.

If the Author chooses the Open Access Option (see 1.5) an open access option fee (also known as APC, Article Processing Charges) is to be paid after acceptance (there is no submission fee); This fee covers the costs involved in the open access publication, such as editorial handling, copyediting, data management, proofs, administrative overheads and technologies in order to make your article findable, accessible, interoperable and reusable. For more information please refer to the Article-processing charges.

1.5 Open access option

All articles published by in the ‘Open Access Option’ in the Mechanics & Industry are made freely and permanently accessible online immediately upon publication, without subscription charges or registration barriers. Articles are available from the website of the journal: Authors are the copyright holders of their articles. All articles bear the following mention: This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

1.6 Data sharing policy

Data sharing is the practice of making data used for scholarly research available to other investigators. The need to share data quickly has been pointed out, for example, in medicine, in the case of the development of new medicines and vaccines.

Many funding agencies, institutions, and publication venues have policies regarding data sharing because transparency and openness are considered by many to be part of the scientific method.

The Mechanics & Industry authors are invited to upload supplemental datasets related to their research to an online repository, making it available for both human and machine reading in order to further aid the acceleration of scientific discovery.

Authors are invited to prepare and deposit their data according to the FAIR data principles. FAIR stands for Findable, Accessible, Interoperable and Re-usable. The principles are available here.

The dataset should be findable through a complete set of metadata, including a license for re-use and a data identifier (DOI or other). The dataset is accessible when access is open. Interoperable means that the data can be used and combined with other datasets in a format that is sufficiently widely distributed. Re-usability is achieved when the dataset is deposited with a corresponding Creative Commons open license and is downloadable. Further, re-usability includes that parameters how this dataset has been collected and machine and experimental conditions are documented.

2. Types of papers

Below are listed the types of publications are considered:

  1. Research Article
  2. Review Article

3. Presentation of manuscripts

The manuscripts should be written in English (if the manuscript presents a poor English and/or many grammatical errors, it will not be accepted for evaluation). Authors that are not native English language and would like to give their article the best chance of acceptance, may want to consider using English language editing services.

Use Times 12 with 1.5 interline throughout the manuscript and avoid unnecessary formatting. Number pages. Use up to three subheading levels in total. SI units should be used throughout the manuscript. Manuscripts may be submitted in WORD format as well as in Latex.

3.1 Title and authors

3.1.1 Title

Title should be simple, concise and informative. A shortened version of the title consisting of a maximum of 75 characters (including spaces) for running headers should also be provided.

3.1.2 Author(s) name(s) and affiliations

A list of all authors, as well as corresponding addresses, should be provided. Addresses should contain all information necessary for an effective mail delivery. E-mail and telephone numbers should also be provided to speed up communication between Editorial Office, readers and authors.

3.2 Order of parts

Manuscripts should be prepared according to the following order:

  • Abstract and 4-6 keywords
  • Introduction
  • Material and Methods
  • Results
  • Discussion
  • Conflict of interest
  • Acknowledgements
  • Tables
  • Figure Legends
  • References

3.3 First page, title

The first page should include: title of paper, list of all authors with full given and family names, addresses of all authors, and name of corresponding author with email address. The title should be short and descriptive, and less than 250 characters in length (including spaces).

All individual disclosures of conflict of interest of all co-authors shall also be indicated on this page.

3.4 Abstract

An abstract should accompany each manuscript; it should be completely self-contained, not exceeding 250-300 words and written as a single paragraph. Mathematical expressions should be avoided.

3.5 Main text

3.5.1 Introduction

No subsection. This section is headed "Introduction".

3.5.2 Materials and Methods

This part may be presented as several subsections (up to two levels of subheadings). All information regarding deposit of data and code underlying the published research should be mentioned in this section, by indicating especially by hyperlinks where the information can be found.

3.5.3 Results

This section may be presented as a single part or as several subsections; maximum of two subheading levels.

3.5.4 Discussion

This section may be presented as a single part or as several subsections; maximum of two subheading levels. The last subsection can be "Conclusions". Follow instructions for citations. In certain cases, it might be appropriate to mix the results and discussion in a single section, headed "Results and discussion".

3.5.5 Conflict of Interest

This section, mandatory in articles in the disciplines of life sciences and medicine must be inserted before the Acknowledgements. This section shall describe whether yes or no, each individual author must disclose any kind of conflict of interest.

Depending on the type of conflict, the following sentences are recommended to be added for each author (please use the authors' initials here):

  • For author AA receiving personal funding please state:
    "AA has received funding from" and note the source.
  • In case BB's institution received any sort of support, state:
    "The institution of BB has received funding from…" and note the source.
  • If CC received no financial support please state,
    "CC certifies that he or she has no financial conflict of interest (eg, consultancies, stock ownership, equity interest, patent/licensing arrangements, etc) in connection with this article."
  • If DD has received or may receive any personal payment or other benefit from a commercial entity (eg, serve as a consultant), please note:
    "DD has or may receive payments or benefits from … (note the source) related to this work."

3.5.6 Acknowledgements

This section must be concise. No subdivisions. Mention here colleagues and grants. See also the above section about authorship and mention here all those persons not meeting all the criteria necessary for authorship.

3.4.7 References

This section should be arranged according to the precise format detailed below. Only works cited in the text should appear here. Citation of unpublished papers and grey literature should generally be avoided. Software cited in the Material and Methods should have a citation. Papers may be cited as "in press" only when they have been accepted for publication (in this case, include the DOI).

4. Tables

Tables (numbered as Table 1, Table 2, etc.) should be presented as one per page. Avoid complex formatting and use the basic Table format in Word or Excel.

5. Figures

5.1.1 Figure numbers and legends

Figures should be numbered as Figure 1, Figure 2, etc. They are referred to in the text as Figure 1, Figure 2, etc. Legends are grouped on a separate page.

5.1.2 Technical information

All figures are published free of charge (i.e. they are included in the publication fee), including color photographs and diagrams. However, only photographs of scientific interest and pertaining to the subject of the article should be included. Color illustrations, especially diagrams, should be understandable even, if they are printed as grey levels.

Figures should be prepared to be of good quality both when they are viewed onscreen as HTML and when the PDF is printed. Figures may be arranged as "plates", but keep in mind that PDFs are prepared to be printed on A4 pages.

The electronic submission system will accept PNG (preferred), TIFF (with compression), and EPS files, with appropriate resolution (300 dpi for colour photographs, 600 dpi for halftone work, 1200 dpi for line work). JPG format is not recommended - PNG is preferred.

Manuscripts with figures of insufficient technical quality will be immediately sent back for revision by the editorial team and will not begin the review process before correct files are uploaded.

6. Supplementary online material

Supplementary online material may include data too long to be included in the manuscript, additional illustrations and movies. Online material is subjected to strict refereeing. Formats accepted are: PDF, graphic formats for supplementary figures, MPEG for videos. Files should preferably be less than 20 Mb.

7. Mathematical material

A standard typesetting procedure is followed by the production staff. Authors should observe the following simple rules to help clarify the content of mathematical material. The text should make clear distinctions between physical variables, mathematical symbols, units of measurement, abbreviations, chemical formulas, etc. Hand-written Greek letters should be written fully in the margin at the first place of mention. Equations must be typewritten in papers submitted as hard copy and be sequentially numbered. The number should appear in parentheses at the right-hand side of the page and be referred to in the text as, e.g. (7).

Caution: Mathematical expressions often need to be displayed on two or more lines (“broken”) because of the line length limitation of IJMQE's two-column layout. There are situations where breaking an equation is not possible or appropriate (long fractions or matrices). The production department reserves the possibility of placing unbroken equations at the bottom or at the top of the page(s) concerned, according to the page layout to be defined by the production staff, with an appropriate citation in the text. For example:

See equation (8) below (above)

Authors who have access to italic and boldface should use these to identify physical or mathematical variables. Variables are to be set in normal italic. Physical constants such as the speed of light or the Boltzmann constant are also set in normal italic.

  • Italic type should be avoided for the following:
  • Units of measurement (e.g., km, g, K, cm2, s1).
  • Mathematical signs such as sin, cos, log, exp, etc.
  • Chemical formulas.

8. References

Authors are encouraged to use a reference manager software.

8.1 References in the text

References are numbered as [1], [2,3,7] or [5-9]. The use of numbered references does not mean that author names and dates of cited papers are prohibited in the text, but this should be used only if necessary.

Example: Many studies [1-9] have addressed … (no special need to indicate authors here). In 2013, Smith [10] claimed that … but Dupont [11,12] later demonstrated that… (names of authors and dates are useful here).

8.2 Presentation of references

References are numbered in the order of appearance in the text. Words in titles are not capitalised. No journal name begins with "The".

Journal articles

  1. O.F. Kieler, R. Behr, R. Wendisch, S. Bauer, L. Palafox, J. Kohlmann, Towards a 1 V Josephson Arbitrary Waveform Synthesizer, IEEE Trans. Appl. Supercond. 25, 1–5 (2015)
  2. J. Abadie, E. Piat, S. Oster, M. Boukallel, Sens. Actuat. A 173, 227–237 (2012)


  1. N. Storey, Electronics: A System Approach, 4th edn. (Pearson Education, 2009)

9. Electronic submission

Authors should submit their manuscripts electronically, only through the web at the following address: Before you begin submission, prepare the following:

  • A list of full names of all authors and a valid email address for each of them (copy and paste from first page of manuscript);
  • A Word/Latex file of the manuscript;
  • A Word/Latex file of the covering letter, explaining why the manuscript is of importance and any other detail.
  • The electronic files of all figures, with appropriate resolution and technical quality.