Open Access
Table 7
Comparison between the bending test results and the predictions of the analytical model obtained from the critical load Fc of the compression test for the one-screw assembly (top) and the two-screws assembly (bottom).
| One-screw assembly | Load [kN] | Corresponding bending moment | Moment [N⋅m] |
|---|---|---|---|
| Limit load F of bending test |
0.17 | M = F x Lt | 68 |
| Maximum load F of bending test |
0.27 | M = F x Lt | 113 |
| Critical load Fc of compression test |
2.25 [1.81, 2.68] | Mc = (e-Δ/3) Fc | 89 [72, 106] |
| Two-screws assembly | Load [kN] | Corresponding bending moment | Moment [N.m] |
| Limit load F of bending test |
0.33 | M = F x Lt | 135 |
| Maximum load F of bending test |
0.49 | M = F x Lt | 203 |
| Critical load Fc of compression test |
2.25 [1.81, 2.68] | Mc = (e+d-Δ/3) Fc | 162 [130, 192] |
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.