Effects of the tool path strategies on incremental sheet metal forming process
Mechanics & Industry, 17 4 (2016) 411
Published online: 2016-06-01
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
A non-associated constitutive model based on yld2004-18p yield criterion and its applications on sheet metal forming analysis
Honghao Wang, Changxiang Fan, Akira Yoshimura, Sai Xu, Guangjun Qiu, Xin Liang and Jun YanagimotoScientific Reports 15 (1) (2025)
https://doi.org/10.1038/s41598-025-85270-1
Influence of Heat Treatment on Properties and Microstructure of EN AW-6082 Aluminium Alloy Drawpieces After Single-Point Incremental Sheet Forming
Łukasz Kuczek, Krzysztof Żaba, Tomasz Trzepieciński, Mateusz Wąsikowski, Maciej Balcerzak and Ryszard SitekApplied Sciences 15 (2) 783 (2025)
https://doi.org/10.3390/app15020783
Explicating tensile response of AA6061-T6 sheet post single point incremental forming: Two camera-DIC strain measurement and texture analysis
Mohit Sharma, Anirban Bhattacharya and Surajit Kumar PaulMechanics of Materials 192 104963 (2024)
https://doi.org/10.1016/j.mechmat.2024.104963
Single-point incremental formability of Monel 400: Coupled grey relational and principal component analyses
Selvaraj Sathiyaseelan, Ramanathan Kalimuthu, Chinnaiyan Sathiya Narayanan and Arasappan Rajesh KannanProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024)
https://doi.org/10.1177/09544089241288936
Incremental Sheet Forming of Duplex Stainless Steel; Effect of Microstructure and Texture Evolution on Tensile Behavior
M. Subba Reddy, D. Lenin Singaravelu and C. Sathiya NarayananJournal of The Institution of Engineers (India): Series D (2024)
https://doi.org/10.1007/s40033-024-00824-3
Wall Thickness Uniformity in ISF of Hydraulic Support: System Design, Finite Element Analysis and Experimental Verification
Miao Shang, Yan Li, Mingshun Yang, et al.Machines 11 (3) 353 (2023)
https://doi.org/10.3390/machines11030353
Sheet metal shrink flanging process: a critical review of current scenario and future prospects
Yogesh Dewang and Vipin SharmaMaterials and Manufacturing Processes 38 (6) 629 (2023)
https://doi.org/10.1080/10426914.2022.2149779
Evaluation of the dimensional accuracy through 3D optical scanning in incremental sheet forming
Alexandru Bârsan, Sever-Gabriel Racz, Radu Breaz and Mihai CrenganişMaterials Today: Proceedings 93 594 (2023)
https://doi.org/10.1016/j.matpr.2023.03.175
Robot-Assisted Cold and Warm Incremental Sheet Forming of Aluminum Alloy 6061: A Comparative Study
Ravi Prakash Singh, Santosh Kumar, Sarang Pande, et al.Metals 13 (3) 568 (2023)
https://doi.org/10.3390/met13030568
The incremental sheet forming; technology, modeling and formability: A brief review
Lotfi Ben SaidProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236 (6) 2729 (2022)
https://doi.org/10.1177/09544089221093306
Identification of fully coupled non-associated-Ductile damage constitutive equations for thin sheet metal applications: Numerical feasibility and experimental validation
Abir Bouhamed, Jamel Mars, Hanen Jrad, et al.Thin-Walled Structures 176 109365 (2022)
https://doi.org/10.1016/j.tws.2022.109365
Experimental and numerical methodology to characterize 5083-aluminium behavior considering non-associated plasticity model coupled with isotropic ductile damage
Abir Bouhamed, Jamel Mars, Hanen Jrad, Mondher Wali and Fakhreddine DammakInternational Journal of Solids and Structures 229 111139 (2021)
https://doi.org/10.1016/j.ijsolstr.2021.111139
Formability and Failure Evaluation of AA3003-H18 Sheets in Single-Point Incremental Forming Process through the Design of Experiments
Mohanraj Murugesan and Dong Won JungMaterials 14 (4) 808 (2021)
https://doi.org/10.3390/ma14040808
Advances in Mechanical Engineering, Materials and Mechanics
L. Ben Said, A. Bouhamed, M. Wali and F. DammakLecture Notes in Mechanical Engineering, Advances in Mechanical Engineering, Materials and Mechanics 105 (2021)
https://doi.org/10.1007/978-3-030-52071-7_15
Advances in Mechanical Engineering, Materials and Mechanics
A. Bouhamed, L. Ben Said, H. Jrad, M. Wali and F. DammakLecture Notes in Mechanical Engineering, Advances in Mechanical Engineering, Materials and Mechanics 70 (2021)
https://doi.org/10.1007/978-3-030-52071-7_10
Emerging Trends in Single Point Incremental Sheet Forming of Lightweight Metals
Tomasz Trzepieciński, Valentin Oleksik, Tomaž Pepelnjak, Sherwan Mohammed Najm, Imre Paniti and Kuntal MajiMetals 11 (8) 1188 (2021)
https://doi.org/10.3390/met11081188
Design and Modeling of Mechanical Systems - IV
Olfa Ghorbel, Sana Koubaa, Jamel Mars, Mondher Wali and Fakhreddine DammakLecture Notes in Mechanical Engineering, Design and Modeling of Mechanical Systems - IV 460 (2020)
https://doi.org/10.1007/978-3-030-27146-6_50
Residual Stresses and Surface Roughness Analysis of Truncated Cones of Steel Sheet Made by Single Point Incremental Forming
Ján Slota, Bogdan Krasowski, Andrzej Kubit, Tomasz Trzepiecinski, Wojciech Bochnowski, Kazimiera Dudek and Miroslav NeslušanMetals 10 (2) 237 (2020)
https://doi.org/10.3390/met10020237
Effect of hardening law and process parameters on finite element simulation of single point incremental forming (SPIF) of 7075 aluminum alloy sheet
Rasoul Esmaeilpour, Hyunki Kim, Taejoon Park, et al.Mechanics & Industry 21 (3) 302 (2020)
https://doi.org/10.1051/meca/2020019
Design and Modeling of Mechanical Systems - IV
A. Bouhamed, H. Jrad, L. Ben Said, M. Wali and F. DammakLecture Notes in Mechanical Engineering, Design and Modeling of Mechanical Systems - IV 300 (2020)
https://doi.org/10.1007/978-3-030-27146-6_32
Efficiency of rubber-pad cushion in bending process of a thin aluminum sheet
L. Ben Said, M. Wali, N. Khedher, et al.Journal of Rubber Research 23 (2) 89 (2020)
https://doi.org/10.1007/s42464-020-00040-0
Coupled anisotropic plasticity-ductile damage: Modeling, experimental verification, and application to sheet metal forming simulation
O. Ghorbel, J. Mars, S. Koubaa, M. Wali and F. DammakInternational Journal of Mechanical Sciences 150 548 (2019)
https://doi.org/10.1016/j.ijmecsci.2018.10.044
Homogenization of elasto-plastic functionally graded material based on representative volume element: Application to incremental forming process
Abir Bouhamed, Hanen Jrad, Jamel Mars, et al.International Journal of Mechanical Sciences 160 412 (2019)
https://doi.org/10.1016/j.ijmecsci.2019.07.005
An analytical model for rapid prediction and compensation of springback for chain-die forming of an AHSS U-channel
Yaguang Li, Zhenye Liang, Zhiheng Zhang, et al.International Journal of Mechanical Sciences 159 195 (2019)
https://doi.org/10.1016/j.ijmecsci.2019.05.046
Experimental and numerical investigation of flexible bulging process of aluminum AA1050-H14 sheet metal with soft tools
Lachhel Belhassen, Sana Koubaa, Mondher Wali and Fakhreddine DammakThe International Journal of Advanced Manufacturing Technology 103 (9-12) 4837 (2019)
https://doi.org/10.1007/s00170-019-04066-6
Non associated-anisotropic plasticity model fully coupled with isotropic ductile damage for sheet metal forming applications
O. Ghorbel, S. Koubaa, J. Mars, M. Wali and F. DammakInternational Journal of Solids and Structures 166 96 (2019)
https://doi.org/10.1016/j.ijsolstr.2019.02.010
A non-associated anisotropic plasticity model with mixed isotropic–kinematic hardening for finite element simulation of incremental sheet metal forming process
Abir Bouhamed, Hanen Jrad, Lotfi Ben Said, Mondher Wali and Fakhreddine DammakThe International Journal of Advanced Manufacturing Technology 100 (1-4) 929 (2019)
https://doi.org/10.1007/s00170-018-2782-3
Advances in Mechanical Engineering and Mechanics
Abir Bouhamed, Hanen Jrad, Lotfi Ben Said, Mondher Wali and Fakhreddine DammakLecture Notes in Mechanical Engineering, Advances in Mechanical Engineering and Mechanics 62 (2019)
https://doi.org/10.1007/978-3-030-19781-0_8
Design and Modeling of Mechanical Systems—III
L. Belhassen, L. Ben Said, S. Koubaa and M. WaliLecture Notes in Mechanical Engineering, Design and Modeling of Mechanical Systems—III 259 (2018)
https://doi.org/10.1007/978-3-319-66697-6_26
Investigation on the fracture behavior of titanium grade 2 sheets by using the single point incremental forming process
G. Yoganjaneyulu, C. Sathiya Narayanan and R. NarayanasamyJournal of Manufacturing Processes 35 197 (2018)
https://doi.org/10.1016/j.jmapro.2018.07.024
Experimental study and FEM analysis of forward hot dieless spinning
Mohammad Sedighi, Iraj Jalili and Mehdi Kasaeian-NaeiniMechanics & Industry 19 (4) 404 (2018)
https://doi.org/10.1051/meca/2018034
Elasto-Plastic Modeling of Low-Velocity Impact on Functionally Graded Circular Plates
Jamel Mars, Lotfi Ben Said, Mondher Wali and Fakhreddine DammakInternational Journal of Applied Mechanics 10 (04) 1850038 (2018)
https://doi.org/10.1142/S1758825118500382
Design and Modeling of Mechanical Systems—III
L. Ben Said, L. Belhassen, J. Mars and M. WaliLecture Notes in Mechanical Engineering, Design and Modeling of Mechanical Systems—III 269 (2018)
https://doi.org/10.1007/978-3-319-66697-6_27
Simulation of incremental forming processes of a pyramidal ring made of two materials
Masood Ghassabi, Milad Salimi and Mohammad HaghpanahiMechanics & Industry 19 (3) 313 (2018)
https://doi.org/10.1051/meca/2018025
Design and Modeling of Mechanical Systems—III
M. Abida, J. Mars, F. Gehring, A. Vivet and F. DammakLecture Notes in Mechanical Engineering, Design and Modeling of Mechanical Systems—III 171 (2018)
https://doi.org/10.1007/978-3-319-66697-6_17
Numerical Implementation of Coupled Anisotropic Plasticity-Ductile Damage in Sheet Metal Forming Process
R. Autay, S. Koubaa, M. Wali and F. DammakJournal of Mechanics 34 (4) 417 (2018)
https://doi.org/10.1017/jmech.2017.28
Numerical and experimental investigations of low velocity impact on glass fiber-reinforced polyamide
J. Mars, E. Chebbi, M. Wali and F. DammakComposites Part B: Engineering 146 116 (2018)
https://doi.org/10.1016/j.compositesb.2018.04.012
Implementation issues of Yld2000-2d model under larger biaxial yield stress
Yong Zhang, Qing Zhang and Yuantao SunMechanics & Industry 19 (5) 501 (2018)
https://doi.org/10.1051/meca/2018031
Numerical prediction of the ductile damage in single point incremental forming process
L. Ben Said, J. Mars, M. Wali and F. DammakInternational Journal of Mechanical Sciences 131-132 546 (2017)
https://doi.org/10.1016/j.ijmecsci.2017.08.026
Numerical prediction of springback and ductile damage in rubber-pad forming process of aluminum sheet metal
L. Belhassen, S. Koubaa, M. Wali and F. DammakInternational Journal of Mechanical Sciences 117 218 (2016)
https://doi.org/10.1016/j.ijmecsci.2016.08.015