An optimization research on groove textures of a journal bearing using particle swarm optimization algorithm
Mechanics & Industry, 22 (2021) 1
Published online: 2021-03-08
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Topological optimization of dimple distribution for enhanced performance in hydrodynamic porous self-lubricating journal bearings with sealed ends
Walid Ifrah, Belkacem Manser, Ahmed Chellil, Haroun Ragueb, Hamza Mechakra, Sofiane Khelladi and Idir BelaidiProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 240 (2) 288 (2026)
https://doi.org/10.1177/13506501251345197
Optical Investigation of Micro-Texture Performance Across the Transition from Conformal to Concentrated Contact
Milan Omasta, Petr Šperka, Šárka Houdková, Pavel Polach, Ivan Křupka and Martin HartlTribology Online 21 (2) 144 (2026)
https://doi.org/10.2474/trol.21.144
Enhancing the wear resistance of 20CrMnTi steel under thin oil lubrication using gradient distributed surface microtexture
Zhi Chen, Lexing Deng, Zouhao Song, Fei Hu, Jinghao Lu, Guojun Zhang and Fenglin HanOptics & Laser Technology 202 115447 (2026)
https://doi.org/10.1016/j.optlastec.2026.115447
Data driven performance prediction and optimization model for a nano-lubricated multi-pad active journal bearing using modified Krieger–Dougherty viscosity and couple stress models
Girish Hariharan, Nitesh Kumar, Shiva Kumar, Shivani S, Subraya Krishna Bhat, Meghana Kundala Navada and Ganesha AroorApplications in Engineering Science 25 100293 (2026)
https://doi.org/10.1016/j.apples.2026.100293
Dynamic Response of Hydrodynamic Journal Bearings With Rectangular Macro‐Grooves and Nano‐Lubricant Additives
Arun Bangotra and Sanjay SharmaLubrication Science 38 (1) 1 (2026)
https://doi.org/10.1002/ls.70011
Analysis and optimization of the influence of bearing assembly parameters on the dynamic characteristics of shaft system
Ke Yang, Guoqiang Chen, Yabin Zhang, Yan Li and Liang CaoIndustrial Lubrication and Tribology 77 (1) 157 (2025)
https://doi.org/10.1108/ILT-07-2024-0265
Beyond smoothness: the art of surface texturing battling against friction
Qianhao Xiao, Xuanyao Wang, Yayong Wang, Wei Zheng, Jiwen Xu, Xichun Luo, Jining Sun and Lei ZhangInternational Journal of Extreme Manufacturing 7 (2) 022014 (2025)
https://doi.org/10.1088/2631-7990/ad9c01
Optimization of surface textures for the gas journal bearing based on hydrodynamic lubrication
Qin Li, Mengke Ren, Junfeng Gu, Zheng Li, Shilun Ruan and Changyu ShenMechanics Based Design of Structures and Machines 1 (2025)
https://doi.org/10.1080/15397734.2025.2538087
A Comprehensive Review of Journal Bearing Models: Comparative Analysis of Thermal, Elastic, and Hydrodynamic Approaches Considering Misalignment, Surface Texture, Turbulence, and Cavitation
Sudhir Chaudhary and Rajiv VermaJournal of Tribology 147 (11) (2025)
https://doi.org/10.1115/1.4069141
101 (2025)
https://doi.org/10.1007/978-981-95-2270-5_4
Thermo-Mechanical Coupled Characteristics for the Non-Axisymmetric Outer Ring of the High-Speed Rail Axle Box Bearing with Embedded Intelligent Sensor Slots
Longkai Wang, Can Hu, Fengyuan Liu and Hongbin TangSymmetry 17 (10) 1667 (2025)
https://doi.org/10.3390/sym17101667
Data-Driven Multi-Objective Optimization Design of Micro-Textured Wet Friction Pair
Yulin Xiao, Donghui Chen, Shiqi Hao, Chong Ning, Xiaotong Ma, Bingyang Wang and Xiao YangAgriculture 15 (20) 2152 (2025)
https://doi.org/10.3390/agriculture15202152
Sensitivity of Texture Evolution and Performance to Eccentricity, Misalignment, and Oil Supply in Journal Bearings with the Circumferential Oil Groove: An Adjoint-Based Optimization Study
Di Zhang, Haijun Wei and Chunxing GuLubricants 13 (11) 479 (2025)
https://doi.org/10.3390/lubricants13110479
139 36 (2024)
https://doi.org/10.1007/978-3-031-40455-9_4
An Integrated Design Method for Used Product Remanufacturing Process Based on Multi-Objective Optimization Model
Chao Ke, Yanxiang Chen, Muyang Gan, Yang Liu and Qunjing JiProcesses 12 (3) 518 (2024)
https://doi.org/10.3390/pr12030518
Research on the Optimal Design Approach of the Surface Texture for Journal Bearings
Chunxing Gu, Yumin Cui and Di ZhangLubricants 12 (4) 111 (2024)
https://doi.org/10.3390/lubricants12040111
A method to manufacture spiral bevel gears by equivalent completing
Longlong Geng, Shaowu Nie and Chuang JiangMechanics & Industry 25 18 (2024)
https://doi.org/10.1051/meca/2024013
The optimization design for the journal-thrust couple bearing surface texture based on particle swarm algorithm
Jiahao Shi, Bin Zhao, Jingyi He and Xiqun LuTribology International 198 109874 (2024)
https://doi.org/10.1016/j.triboint.2024.109874
Influence of cut parameters on mesh performance of spiral bevel gear by duplex spread blade method
Longlong Geng, Shaowu Nie, Chuang Jiang and Ruijie XieManufacturing Review 11 3 (2024)
https://doi.org/10.1051/mfreview/2023017
Influence of surface grooving methods on steady and dynamic performance of spiral groove gas face seals
Liming Teng, Jinbo Jiang, Xudong Peng and Jiyun LiAlexandria Engineering Journal 64 55 (2023)
https://doi.org/10.1016/j.aej.2022.08.044
An Intelligent Design Method for Remanufacturing Considering Remanufacturability and Carbon Emissions
Peng Peng, Chao Ke and Jun HanProcesses 11 (12) 3359 (2023)
https://doi.org/10.3390/pr11123359
Generative design of texture for sliding surface based on machine learning
Bao Zhu, Wenxin Zhang, Weisheng Zhang and Hongxia LiTribology International 179 108139 (2023)
https://doi.org/10.1016/j.triboint.2022.108139
Multi-objective optimization of process parameters for ultrasonic rolling extrusion of 42CrMo material
Xiaoqiang Wang, Haojie Wang, Paigang Wang and Qiping ZhuMechanics & Industry 24 6 (2023)
https://doi.org/10.1051/meca/2023004
Geometric design and performance analysis of conical-rotor screw vacuum pump with adjustable flow field clearances
Li Zhang, Yang Liu, Yongju Zhang, Wenfei Liu and Ziyun ChenVacuum 214 112201 (2023)
https://doi.org/10.1016/j.vacuum.2023.112201
Deep drawing of a rectangular cup with a small radius at the bottom circular arc by employing a locally-thickened plate
Jinbo Li, Xiaohui Chen, Xiao Chen, Hao Liu and Xianlong LiuManufacturing Review 9 16 (2022)
https://doi.org/10.1051/mfreview/2022015
Study of failure analysis and manufacturing processes improvement of cracking connecting rod
Zhen Zhang, Anyuan Jiao, Xiwei Lv and Haodong DingJournal of Mechanical Science and Technology 36 (11) 5445 (2022)
https://doi.org/10.1007/s12206-022-1010-0
Numerical micro-texture optimization for lubricated contacts—A critical discussion
Max Marian, Andreas Almqvist, Andreas Rosenkranz and Michel FillonFriction 10 (11) 1772 (2022)
https://doi.org/10.1007/s40544-022-0609-6
Numerical Calculation of Fluid Film Force on Journal Bearings Based on a Biconjugate Gradient-Stabilized Algorithm
Bin Wei, Yinghou Jiao and Xianglin WuJournal of Tribology 144 (11) (2022)
https://doi.org/10.1115/1.4054976
Effect of surface micro-groove texture on lubrication performance of tripod universal coupling
Fuqin Yang, Q.H. Xiao and Chunhui GengIndustrial Lubrication and Tribology 73 (10) 1237 (2021)
https://doi.org/10.1108/ILT-06-2021-0198
Effects of Texture Bottom Profile on Static and Dynamic Characteristics of Journal Bearings
Peng Li, Fang Zeng, Sen Xiao, Dong Zhen, Hao Zhang, Zhanqun Shi and Hulun GuoShock and Vibration 2021 (1) (2021)
https://doi.org/10.1155/2021/7068744