Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

This article has been cited by the following article(s):

Machining Optimization of HDPE Pipe Using the Taguchi Method and Grey Relational Analysis

S. Belhadi, M. Kaddeche, K. Chaoui and M.-A. Yallese
International Polymer Processing 31 (4) 491 (2016)
DOI: 10.3139/217.3271
See this article

Advances in Manufacturing Engineering and Materials

Nicolae Panc, Glad Contiu and Vlad Bocanet
Lecture Notes in Mechanical Engineering, Advances in Manufacturing Engineering and Materials 324 (2019)
DOI: 10.1007/978-3-319-99353-9_35
See this article

Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function

Amel Chabbi, Mohamed Athmane Yallese, Ikhlas Meddour, et al.
Measurement 95 99 (2017)
DOI: 10.1016/j.measurement.2016.09.043
See this article

A method for mechanical property assessment across butt fusion welded polyethylene pipes

Slimane Niou, Kamel Chaoui, Salaheddine Azzouz, Nacira Hamlaoui and Latifa Alimi
The International Journal of Advanced Manufacturing Technology 97 (1-4) 543 (2018)
DOI: 10.1007/s00170-018-1908-y
See this article

Investigation of geometric parameters with HSS tools in machining polyamide 6 using Taguchi method

Patricio Quitiaquez, Juan Cocha, William Quitiaquez and Xavier Vaca
Materials Today: Proceedings (2021)
DOI: 10.1016/j.matpr.2021.08.002
See this article

Machining of tough polyethylene pipe material: surface roughness and cutting temperature optimization

N. Hamlaoui, S. Azzouz, K. Chaoui, Z. Azari and M.-A. Yallese
The International Journal of Advanced Manufacturing Technology 92 (5-8) 2231 (2017)
DOI: 10.1007/s00170-017-0275-4
See this article

Enhanced Multi-Objective Teaching-Learning-Based Optimization for Machining of Delrin

Elango Natarajan, Varadaraju Kaviarasan, Wei Hong Lim, Sew Sun Tiang and Teng Hwang Tan
IEEE Access 6 51528 (2018)
DOI: 10.1109/ACCESS.2018.2869040
See this article

Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods

A. Chabbi, M.A. Yallese, M. Nouioua, et al.
The International Journal of Advanced Manufacturing Technology 91 (5-8) 2267 (2017)
DOI: 10.1007/s00170-016-9858-8
See this article

Short-term HDPE pipe degradation upon exposure to aggressive environments

L. Alimi, K. Chaoui, W. Ghabeche and W. Chaoui
Matériaux & Techniques 101 (7) 701 (2013)
DOI: 10.1051/mattech/2013083
See this article

Experimental and modeling investigation on machined surfaces of HDPE-MWCNT polymer nanocomposite

Yao Gong, Young-Jin Baik, Chang Ping Li, et al.
The International Journal of Advanced Manufacturing Technology 88 (1-4) 879 (2017)
DOI: 10.1007/s00170-016-8840-9
See this article

Mechanical properties and surface roughness assessment of outer and inner HDPE pipe layers after exposure to toluene methanol mixture

Wafia Ghabeche, Kamel Chaoui and Nassereddine Zeghib
The International Journal of Advanced Manufacturing Technology 103 (5-8) 2207 (2019)
DOI: 10.1007/s00170-019-03651-z
See this article

Investigation of cutting and specific cutting energy in turning of POM-C using a PCD tool: Analysis and some optimization aspects

Milan Trifunović, Miloš Madić, Predrag Janković, Dragan Rodić and Marin Gostimirović
Journal of Cleaner Production 127043 (2021)
DOI: 10.1016/j.jclepro.2021.127043
See this article

Futuristic Trends in Intelligent Manufacturing

Elango Natarajan, K. Palanikumar and S. Ramesh
Materials Forming, Machining and Tribology, Futuristic Trends in Intelligent Manufacturing 1 (2021)
DOI: 10.1007/978-3-030-70009-6_1
See this article