Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Manufacture and characterisation of polylactic acid biocomposites with high-purity cellulose isolated from olive pruning waste

José A. Rodríguez-Liébana, Francisco J. Navas-Martos, Sofía Jurado-Contreras, Francisca Morillas-Gutiérrez, Soledad Mateo, Alberto J. Moya and M.Dolores La Rubia
Journal of Reinforced Plastics and Composites 43 (5-6) 318 (2024)
https://doi.org/10.1177/07316844231162286

Efficient native biosorbent derived from agricultural waste precursor for anionic dye adsorption in synthetic wastewater

Hocine Grabi, Wahiba Lemlikchi, Fazia Derridj, Safia Lemlikchi and Mohamed Trari
Biomass Conversion and Biorefinery 13 (1) 171 (2023)
https://doi.org/10.1007/s13399-021-01280-9

Characterization of friction and wear of phenolic resin matrix composites reinforced by bamboo fibers of alkaline and LaCl3 treatment

Ming Liu, Dongyang Hou, Kaikui Zheng and Chenghui Gao
Materials Today Communications 35 106361 (2023)
https://doi.org/10.1016/j.mtcomm.2023.106361

EFFECT OF ALKALINE TREATMENT ON MECHANICAL PROPERTIES OF ALFA FIBER/UNSATURATED POLYESTER COMPOSITE

MELOUKI AZZEDINE, BENYAHIA AZZEDINE, DEGHFEL NADIR, FARSI CHOUK, LAIB NOURI, LEBID MAHMOUD and ADDOUR YAKOUT
Cellulose Chemistry and Technology 57 (5-6) 607 (2023)
https://doi.org/10.35812/CelluloseChemTechnol.2023.57.55

High electrical conductivity of Cu wires cladded by Gr/Cu coating

Kun Xia Wei, Shao Peng Wang, Wei Wei, et al.
Surface Innovations 11 (1-3) 110 (2023)
https://doi.org/10.1680/jsuin.22.00014

Reinforcing the mechanical properties of bamboo fiber/low density polyethylene composites with modified bamboo-woven structure

Shujuan Liu, Lijuan Liu, Kangli Yang, Zhiqing Yuan, Xinyi Li, Cancheng Li and Shoutong Meng
Journal of Materials Science 58 (25) 10359 (2023)
https://doi.org/10.1007/s10853-023-08682-2

Investigation on Properties of Raw and Alkali Treated Novel Cellulosic Root Fibres of Zea Mays for Polymeric Composites

S. Anne Kavitha, R. Krishna Priya, Krishna Prakash Arunachalam, et al.
Polymers 15 (7) 1802 (2023)
https://doi.org/10.3390/polym15071802

The volatile organic compounds emission mechanism of pretreated bamboo during heat treatment

Jingjing Gao, Tianfang Zhang, Jing Qian, Luxi He, Jinguang Geng, Xiangyu Zhao, Zhengbin He and Songlin Yi
Industrial Crops and Products 195 116484 (2023)
https://doi.org/10.1016/j.indcrop.2023.116484

Synthesis and characterization of wood flour modified by graphene oxide for reinforcement applications

Ammar Boudjellal, Djalal Trache, Kamel Khimeche, et al.
International Polymer Processing 37 (1) 83 (2022)
https://doi.org/10.1515/ipp-2021-4148

Hybrid polyurethane/natural fibers composites optimized by simplex-centroid mixture design

Felipe Delapria Dias dos Santos, Vagner Roberto Batistela, Andressa dos Santos, et al.
Journal of Composite Materials 56 (7) 1039 (2022)
https://doi.org/10.1177/00219983211060499

Extraction and characterization of Alfa fibers and their use to produce Alfa/wool woven fabrics for composite reinforcement

Kawtar Lamhour, Marwane Rouway, Ouahiba Mrajji, et al.
International Polymer Processing 37 (2) 210 (2022)
https://doi.org/10.1515/ipp-2022-4199

Analysis of the properties of alkaline-treated rape straw and stalk polyvinyl chloride composites

Abdulmalik Hamza Bichi, Keping Zhang, Junqian Yang and Dongsheng Chen
Textile Research Journal 004051752210985 (2022)
https://doi.org/10.1177/00405175221098586

Comparative evaluation of cellulose nanocrystals from bagasse and coir agro-wastes for reinforcing PVA-based composites

Krishnavani Pavalaydon, Hareenanden Ramasawmy and Dinesh Surroop
Environment, Development and Sustainability 24 (8) 9963 (2022)
https://doi.org/10.1007/s10668-021-01852-9

Handbook of Epoxy/Fiber Composites

Shakuntala Ojha, Vasavi Boggarapu, Rakesh Kanakam, Gujjala Raghavendra and P. Subash Chandra Bose
Handbook of Epoxy/Fiber Composites 515 (2022)
https://doi.org/10.1007/978-981-19-3603-6_20

Experimental study on the properties of Alfa/wool woven fabrics reinforced epoxy composite as an application in wind turbine blades

Kawtar Lamhour, Marwane Rouway, Abdeslam Tizliouine, et al.
Journal of Composite Materials 56 (21) 3253 (2022)
https://doi.org/10.1177/00219983221111493

Natural Hybrid Reinforcement Effect on Mechanical Properties of UPE Composite

Wissam Nubras Alrawie, Zaynab N. Rasheed Alraziqi and Qahtan Adnan Hamad
Materials Science Forum 1077 29 (2022)
https://doi.org/10.4028/p-89k4p9

Preparation and Characterization of Graphene Oxide-based Natural Hybrids Containing Alfa Fibers or Microcrystalline Cellulose

Ammar Boudjellal, Djalal Trache, Kamel Khimeche, Said Lotfi Hafsaoui and Mohammed Seddik Razali
Journal of Natural Fibers 19 (13) 5321 (2022)
https://doi.org/10.1080/15440478.2021.1875373

Characterization of Chemically Treated Limonia Acidissima (Wood Apple) Shell Powder: Physicochemical, Thermal, and Morphological Properties

Vasantha Kumar Shravanabelagola Nagaraja Setty, Govardhan Goud, Sharath Peramanahalli Chikkegowda, Sanjay Mavinkere Rangappa and Suchart Siengchin
Journal of Natural Fibers 19 (11) 4093 (2022)
https://doi.org/10.1080/15440478.2020.1853925

Manufacture and Characterization of Recycled Polypropylene and Olive Pits Biocomposites

Sofía Jurado-Contreras, Francisco J. Navas-Martos, José A. Rodríguez-Liébana, Alberto J. Moya and M. Dolores La Rubia
Polymers 14 (19) 4206 (2022)
https://doi.org/10.3390/polym14194206

Effect of Alkali Treatment on Diameter and Tensile Properties of Yucca Gloriosa Fiber Using Response Surface Methodology

Seyed Ehsan Samaei, Hasan Asilian Mahabadi, Seyyed Mohammad Mousavi, Ali Khavanin and Mohammad Faridan
Journal of Natural Fibers 19 (7) 2429 (2022)
https://doi.org/10.1080/15440478.2020.1818348

Morphological, thermal and mechanical properties of benzoxazine resin reinforced with alkali treated alfa fibers

Wissam Bessa, Djalal Trache, Mehdi Derradji and Ahmed Fouzi Tarchoun
Industrial Crops and Products 165 113423 (2021)
https://doi.org/10.1016/j.indcrop.2021.113423

Highly Active Cellulose-Supported Poly(hydroxamic acid)–Cu(II) Complex for Ullmann Etherification

Choong Jian Fui, Tang Xin Ting, Mohd Sani Sarjadi, et al.
ACS Omega 6 (10) 6766 (2021)
https://doi.org/10.1021/acsomega.0c05840

Preparation and characterization of Alfa fibers/graphene nanoplatelets hybrid for advanced applications

Ammar Boudjellal, Djalal Trache, Slimane Bekhouche, et al.
Materials Letters 289 129379 (2021)
https://doi.org/10.1016/j.matlet.2021.129379

Effect of Moisture on the Resistance of Sansevieria Cylindrica–Reinforced Vinyl Ester Composites

R. Deepak Joel Johnson, V. Arumugaprabu and V. Manikandan
Journal of Testing and Evaluation 49 (5) 3305 (2021)
https://doi.org/10.1520/JTE20180827

EFFECT OF CHEMICAL TREATMENT WITH OXIDANTS ON THE MECHANICAL PROPERTIES OF LUFFA SPONGE/UNSATURATED POLYESTER COMPOSITES

NOURI LAIB, AZZEDINE BENYAHIA, ALI REDJEM and NADIR DEGHFEL
Cellulose Chemistry and Technology 55 (1-2) 159 (2021)
https://doi.org/10.35812/CelluloseChemTechnol.2021.55.17

The effects of diammonium phosphate concentration on mechanical properties of coir reinforced polymer composites

Tanmayee Khuntia and Sandhyarani Biswas
Materials Today: Proceedings 41 292 (2021)
https://doi.org/10.1016/j.matpr.2020.09.218

Innovative Husk-Crete Building Materials from Rice Chaff and Modified Cement Mortars

Banjo Akinyemi, Temidayo E. Omoniyi, Olugbenga Elemile and Oluwafemi Arowofila
Acta Technologica Agriculturae 23 (2) 67 (2020)
https://doi.org/10.2478/ata-2020-0011

Structural Characterization and Mechanical Behaviour of Sodium Hydroxide-Treated Urena lobata Fiber Reinforced Polypropylene Matrix Composites

Chioma E. Njoku, Joseph A. Omotoyinbo, Kenneth K. Alaneme and Michael O. Daramola
Fibers and Polymers 21 (12) 2983 (2020)
https://doi.org/10.1007/s12221-020-1289-3

Thermal and mechanical properties of chemical modification on sugarcane bagasse mixed with polypropylene and recycle acrylonitrile butadiene rubber composite

Mustaffa Zainal, Ragunathan Santiagoo, Afizah Ayob, et al.
Journal of Thermoplastic Composite Materials 33 (11) 1533 (2020)
https://doi.org/10.1177/0892705719832072

Thermal and mechanical properties of bamboo fiber reinforced composites

Siew Choo Chin, Kong Fah Tee, Foo Sheng Tong, Huei Ruey Ong and Jolius Gimbun
Materials Today Communications 23 100876 (2020)
https://doi.org/10.1016/j.mtcomm.2019.100876

Influence of Alkali Treatment and Fiber Content on Mechanical Properties of Pineapple Leaf Fiber (PALF)-Reinforced Cement-Based Composites via Full Factorial Design

Charmane Dawn H. Esper and Hana Astrid R. Canseco
Materials Science Forum 1005 65 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.1005.65

Non‐Isothermal Curing Kinetics of Alkali‐Treated Alfa Fibers/Polybenzoxazine Composites Using Differential Scanning Calorimetry

Wissam Bessa, Djalal Trache, Mehdi Derradji and Ahmed F. Tarchoun
ChemistrySelect 5 (18) 5374 (2020)
https://doi.org/10.1002/slct.202000596

Effect of Steam and Bleaching Treatment on the Characteristics of Pineapple Leaves Fibre Derived Cellulose

Surenthiran Gnanasekaran, Siti Nur Najihah Muslih, Jun Haslinda Shariffuddin and Noor Ida Amalina Ahamad Nordin
Pertanika Journal of Science and Technology 28 (S2) (2020)
https://doi.org/10.47836/pjst.28.s2.11

Tensile Properties and Impact Strength of RHDPE/BF Composites: The Effects of Chemical Treatment

Aini Asifa Ahmad Kamal, N Z Noriman, S T Sam, et al.
IOP Conference Series: Materials Science and Engineering 557 (1) 012041 (2019)
https://doi.org/10.1088/1757-899X/557/1/012041

Modifications of Alfa fibers by alkali and hydrothermal treatment

Soukaina Ajouguim, Karima Abdelouahdi, Mohamed Waqif, Maria Stefanidou and Latifa Saâdi
Cellulose 26 (3) 1503 (2019)
https://doi.org/10.1007/s10570-018-2181-9

Efficient Hydrophobic Modification of Old Newspaper and Its Application in Paper Fiber Reinforced Composites

Weiwei Zhang, Jin Gu, Dengyun Tu, Litao Guan and Chuanshuang Hu
Polymers 11 (5) 842 (2019)
https://doi.org/10.3390/polym11050842

Poly (lactic acid)/Spartium junceum fibers biocomposites: effects of the fibers content and surface treatments on the microstructure and thermomechanical properties

M. Bedreddine, S. Nekkaa and M. Guessoum
Composite Interfaces 26 (12) 1101 (2019)
https://doi.org/10.1080/09276440.2019.1591577

Study on the Preparation of Ionic Liquid Doped Chitosan/Cellulose-Based Electroactive Composites

Fang Wang, Chong Xie, Liying Qian, Beihai He and Junrong Li
International Journal of Molecular Sciences 20 (24) 6198 (2019)
https://doi.org/10.3390/ijms20246198

Influence of fiber treatment on dimensional stabilities of rattan waste composite boards

A Zuraida, Y Insyirah, T Maisarah and H Zahurin
IOP Conference Series: Materials Science and Engineering 290 012029 (2018)
https://doi.org/10.1088/1757-899X/290/1/012029

Comparative Study of Impact Strength Characteristics of Treated and Untreated Sisal Polyester Composites

G.L. Easwara Prasad, B.S. Keerthi Gowda and R. Velmurugan
Procedia Engineering 173 778 (2017)
https://doi.org/10.1016/j.proeng.2016.12.096

Electromechanical characterization of multilayer graphene-reinforced cellulose composite containing 1-ethyl-3-methylimidazolium diethylphosphonate ionic liquid

Emine Akar, Yoldaş Seki, Okan Özdemir, et al.
Science and Engineering of Composite Materials 24 (2) 289 (2017)
https://doi.org/10.1515/secm-2015-0038

Plant fibre-reinforced polymers: where do we stand in terms of tensile properties?

Marta Fortea-Verdejo, Elias Bumbaris, Christoph Burgstaller, Alexander Bismarck and Koon-Yang Lee
International Materials Reviews 62 (8) 441 (2017)
https://doi.org/10.1080/09506608.2016.1271089