The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
This article has been cited by the following article(s):
Comparative investigation on anti-wear mechanism and properties of nano and micron WC reinforce Hastelloy-X composites using oscillating laser deposition
Temporal and Spatial Beam Shaping in LPBF for Fine and Porous Ti-Alloy Structures for Regenerative Fuel Cell Applications
Salomé Sanchez, Ahmad Zafari, Leonardo Caprio, Ali Gökhan Demir and Davoud Jafari Lasers in Manufacturing and Materials Processing 11(1) 154 (2024) https://doi.org/10.1007/s40516-023-00244-3
Additive manufacturing of refractory metals and carbides for extreme environments: an overview
Poulomi Mukherjee, Ashlee Gabourel, Samad A. Firdosy, Douglas C. Hofmann and Atieh Moridi Science and Technology of Welding and Joining 29(2) 99 (2024) https://doi.org/10.1177/13621718241235471
A Review on Laser Beam Shaping Application in Laser‐Powder Bed Fusion
Ahmad Reshad Bakhtari, Huseyin Kursad Sezer, Olcay Ersel Canyurt, Oğulcan Eren, Mussadiq Shah and Sundar Marimuthu Advanced Engineering Materials 26(14) (2024) https://doi.org/10.1002/adem.202302013
Tailoring the microstructure of Fe-2.9wt.%Si alloy in laser powder bed fusion using in-source beam shaping
Generating brick-like melt pools for Laser-Based Powder Bed Fusion using flexible beam shaping: a proof of concept on bead-on-plate single tracks
Jonas Grünewald, Robin Prudlik, Vijaya Holla, Philipp Kopp, Richard Off, Thomas Stoll, Stefan Kollmannsberger and Katrin Wudy Procedia CIRP 124 746 (2024) https://doi.org/10.1016/j.procir.2024.08.216
Beam shaping technology and its application in metal laser additive manufacturing: A review
Jiang Bi, Liukun Wu, Shide Li, Zhuoyun Yang, Xiangdong Jia, Mikhail Dmitrievich Starostenkov and Guojiang Dong Journal of Materials Research and Technology (2023) https://doi.org/10.1016/j.jmrt.2023.08.037
Metal Additive Manufacturing using complex beam shaping
Beam Shaping in Laser Powder Bed Fusion: Péclet Number and Dynamic Simulation
Sergey N. Grigoriev, Andrey V. Gusarov, Alexander S. Metel, Tatiana V. Tarasova, Marina A. Volosova, Anna A. Okunkova and Andrey S. Gusev Metals 12(5) 722 (2022) https://doi.org/10.3390/met12050722
Flexible and highly dynamic beam shaping for Laser-Based Powder Bed Fusion of metals
On Defect Minimization Caused by Oxide Phase Formation in Laser Powder Bed Fusion
Anna A. Okunkova, Semen R. Shekhtman, Alexander S. Metel, Nadegda A. Suhova, Sergey V. Fedorov, Marina A. Volosova and Sergey N. Grigoriev Metals 12(5) 760 (2022) https://doi.org/10.3390/met12050760
Influence of Ring-Shaped Beam Profiles on Process Stability and Productivity in Laser-Based Powder Bed Fusion of AISI 316L
Nondiffractive beam shaping for enhanced optothermal control in metal additive manufacturing
Thejaswi U. Tumkur, Thomas Voisin, Rongpei Shi, Philip J. Depond, Tien T. Roehling, Sheldon Wu, Michael F. Crumb, John D. Roehling, Gabe Guss, Saad A. Khairallah and Manyalibo J. Matthews Science Advances 7(38) (2021) https://doi.org/10.1126/sciadv.abg9358
Influence of laser beam profile on the selective laser melting process of AlSi10Mg
Tim Marten Wischeropp, Hussein Tarhini and Claus Emmelmann Journal of Laser Applications 32(2) (2020) https://doi.org/10.2351/7.0000100
Studying Gas-Phase Flows in the Laser Exposure Zone during Selective Laser Melting
Investigation of processes occurring above laser exposed area during powder bed fusion by optical diagnostics
P A Podrabinnik, R S Khmyrov, A D Korotkov, A E Shtanko and A V Gusarov IOP Conference Series: Materials Science and Engineering 971 022007 (2020) https://doi.org/10.1088/1757-899X/971/2/022007
On efficiency and effectiveness of finite volume method for thermal analysis of selective laser melting
Interferometry of Gas-Phase Flows during Selective Laser Melting
Pavel A. Podrabinnik, Alexander E. Shtanko, Roman S. Khmyrov, Andrey D. Korotkov and Andrey V. Gusarov Applied Sciences 10(1) 231 (2019) https://doi.org/10.3390/app10010231
Single track and single layer formation in selective laser melting of niobium solid solution alloy