Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication
Mechanics & Industry, 20 5 (2019) 506
Published online: 2019-07-16
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Machining and Sustainability Performance Comparison for the Milling Process of Al6082 Alloy Under Various Minimum Quantity Lubrication Conditions
Yusuf Furkan Yapan, Kerim Türkeli, Uğur Emiroğlu, Erkan Bahçe and Alper UysalInternational Journal of Precision Engineering and Manufacturing-Green Technology 12 (2) 409 (2025)
https://doi.org/10.1007/s40684-024-00655-3
Predictive Modeling of Surface Roughness, Tool Wear, and Cutting Temperature in High-Speed Turning under Sustainable Machining Environments
Pravin Ashok Mane, Pravin A. Dhawale, Suresh Nipanikar and Avinash N. KhadtareSAE International Journal of Materials and Manufacturing 19 (1) 1 (2025)
https://doi.org/10.4271/05-19-01-0007
Application of a potential novel hybrid nano-lubricant by simultaneous dispersion of ceramic and metallic NPs in plant oil for eco-benign end milling of Incoloy 925
Shravan Kumar Yadav, Sudarsan Ghosh and Aravindan SivanandamThe International Journal of Advanced Manufacturing Technology 139 (1-2) 399 (2025)
https://doi.org/10.1007/s00170-025-15864-6
“The coupling of heat transfer between tool–chip–workpiece interfaces and the wear rate while applying nanofluids as cutting fluids in MQCL-assisted machining”: a comprehensive review
Nevin Nelson and Anjan R NairJournal of Thermal Analysis and Calorimetry 150 (13) 9743 (2025)
https://doi.org/10.1007/s10973-025-14400-8
Effects of machining parameters, coolant oil composition, and coatings on the output characteristics of turning of X5CrNi18-10 stainless steel
Gábor Kónya and Zsolt F. KovácsWear 570 205893 (2025)
https://doi.org/10.1016/j.wear.2025.205893
Machinability assessment and optimization of turning AISI H11 steel under various minimum quantity lubrication (MQL) conditions using nanofluids
Amine Hamdi, Yusuf Furkan Yapan, Alper Uysal and Sidi Mohammed MerghacheThe International Journal of Advanced Manufacturing Technology 137 (7-8) 4089 (2025)
https://doi.org/10.1007/s00170-025-15418-w
The use of castor oil and beeswax as biodegradables cutting fluids on turning of AISI 1045 steel
Mariana Abrantes Gomes de Amorim, Lucas Benini, Roberto Guimarães Pereira and Juan Manuel PardalMaterials and Manufacturing Processes 40 (5) 689 (2025)
https://doi.org/10.1080/10426914.2025.2462853
Nanoparticle-based lubrication during machining: synthesis, application, and future scope—a critical review
Moran Xu, Saood Ali, Rendi Kurniawan, Rohit Kumar Singh Gautam, Thirumalai Kumaran Sundaresan and Khursheed AhmadThe International Journal of Advanced Manufacturing Technology 136 (10) 4141 (2025)
https://doi.org/10.1007/s00170-025-15065-1
INVESTIGATION OF THE MACHINABILITY OF PEEK, PP AND PTFE HIGH PERFORMANCE ENGINEERING THERMOPLASTICS FOLLOWING HEAT TREATMENT
Muhammet Faruk Toprak, Şakir Altınsoy, Nuray Beköz Üllen and M. Hüsnü DirikoluKonya Journal of Engineering Sciences 13 (4) 1193 (2025)
https://doi.org/10.36306/konjes.1622701
Experimental investigation of herbal based Al2O3 nano cutting fluids with minimum quantity lubrication in optimization of turning
G. Srinivasarao, V. Tarachand, T. K. Nagaraja, Harish Hanumanthappa, D. Kondalarao and M. UshaInternational Journal on Interactive Design and Manufacturing (IJIDeM) 19 (9) 6561 (2025)
https://doi.org/10.1007/s12008-025-02230-9
115 (2025)
https://doi.org/10.1007/978-981-96-7026-0_3
585 (2024)
https://doi.org/10.1007/978-3-031-34644-6_60
Nanofluids application in machining: a comprehensive review
Xiaoming Wang, Yuxiang Song, Changhe Li, Yanbin Zhang, Hafiz Muhammad Ali, Shubham Sharma, Runze Li, Min Yang, Teng Gao, Mingzheng Liu, Xin Cui, Zafar Said and Zongming ZhouThe International Journal of Advanced Manufacturing Technology 131 (5-6) 3113 (2024)
https://doi.org/10.1007/s00170-022-10767-2
A challenging study on compatibility or incompatibility of vegetable-based lubricant with human health
Seyed Hasan Musavi and Behnam DavoodiThe International Journal of Advanced Manufacturing Technology 131 (7-8) 3509 (2024)
https://doi.org/10.1007/s00170-024-13083-z
Experimental Investigation of tool wear, surface roughness during milling of EN 25 steel using coconut based vegetable oil
Durwesh Jhodkar, Somadatta Karanjekar, Bharat Chede, Tapus Bajpai and Sourabh ShuklaJournal of Physics: Conference Series 2763 (1) 012014 (2024)
https://doi.org/10.1088/1742-6596/2763/1/012014
Hard turning performance assessment of AISI D2 steel under dual nozzle MQL assisted ZrO2 and GO nano-cutting fluids: A sustainability approach
Saswat Khatai, Ashok Kumar Sahoo, Ramanuj Kumar and Amlana PandaProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 238 (23) 10997 (2024)
https://doi.org/10.1177/09544062241276347
Experimental investigation of turning AISI D2 steel using sillimanite (Al 2 SiO 5 )
S S Anuj Srivathsa, Jeel Alkeshkumar Chaudhari and B MuralidharanMaterials and Manufacturing Processes 39 (12) 1734 (2024)
https://doi.org/10.1080/10426914.2024.2334676
Evaluation of lubrication mechanism of hybrid nanolubricants in turning hardened AISI D6 tool steel
Eric Ramalho Ferreira de Carvalho, Tahiana Francisca da Conceição Hermenegildo, Nicolau Apoena Castro, Anderson Clayton Alves de Melo and Salete Martins AlvesWear 558-559 205583 (2024)
https://doi.org/10.1016/j.wear.2024.205583
Recent research progress on various cooling and lubrication techniques used in sustainable hard machining: A comprehensive review
Saswat Khatai, Ashok Kumar Sahoo, Ramanuj Kumar and Amlana PandaProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 238 (6) 3009 (2024)
https://doi.org/10.1177/09544089231169655
A review of applications of green nanofluids for performance improvement of solar collectors
Debojit Dewanjee and Balaram KunduRenewable Energy 122182 (2024)
https://doi.org/10.1016/j.renene.2024.122182
Evaluation of crude watermelon oil as lubricant in cylindrical turning of AISI 1525 steel employing Taguchi and grey relational analyses techniques
R.A. Kazeem, D.A. Fadare, I.G. Akande, T-C. Jen, S.A. Akinlabi and E.T. AkinlabiHeliyon 10 (3) e25349 (2024)
https://doi.org/10.1016/j.heliyon.2024.e25349
Investigation on the effect of hybrid nanofluid in MQL condition in orthogonal turning and a sustainability assessment
Enes Usluer, Uğur Emiroğlu, Yusuf Furkan Yapan, G. Kshitij, Navneet Khanna, Murat Sarıkaya and Alper UysalSustainable Materials and Technologies 36 e00618 (2023)
https://doi.org/10.1016/j.susmat.2023.e00618
Energy field-assisted high-speed dry milling green machining technology for difficult-to-machine metal materials
Jin Zhang, Xuefeng Huang, Xinzhen Kang, Hao Yi, Qianyue Wang and Huajun CaoFrontiers of Mechanical Engineering 18 (2) (2023)
https://doi.org/10.1007/s11465-022-0744-9
An overview of recent advancements and applications of hybrid nanofluids
Laveet Kumar, Rashmi Walvekar and Mohammad KhalidMaterials Today: Proceedings (2023)
https://doi.org/10.1016/j.matpr.2023.02.060
Current Status of Hard Turning in Manufacturing: Aspects of Cooling Strategy and Sustainability
Rajashree Mallick, Ramanuj Kumar, Amlana Panda and Ashok Kumar SahooLubricants 11 (3) 108 (2023)
https://doi.org/10.3390/lubricants11030108
Vegetable Oil-Based Nanolubricants in Machining: From Physicochemical Properties to Application
Xiaotian Zhang, Changhe Li, Zongming Zhou, Bo Liu, Yanbin Zhang, Min Yang, Teng Gao, Mingzheng Liu, Naiqing Zhang, Zafar Said, Shubham Sharma and Hafiz Muhammad AliChinese Journal of Mechanical Engineering 36 (1) (2023)
https://doi.org/10.1186/s10033-023-00895-5
Assessment of turning AISI 316L stainless steel under MWCNT-reinforced nanofluid-assisted MQL and optimization of process parameters by NSGA-II and TOPSIS
Benkhelifa Oussama, Yusuf Furkan Yapan, Alper Uysal, Cherfia Abdelhakim and Nouioua MouradThe International Journal of Advanced Manufacturing Technology 127 (7-8) 3855 (2023)
https://doi.org/10.1007/s00170-023-11747-w
(2023)
https://doi.org/10.21203/rs.3.rs-3330718/v1
Advanced Manufacturing Processes III
Youssef Touggui, Alper Uysal, Uğur Emiroglu, Eshreb Dzhemilov and Salim BelhadiLecture Notes in Mechanical Engineering, Advanced Manufacturing Processes III 219 (2022)
https://doi.org/10.1007/978-3-030-91327-4_22
Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering
Sit Lu Fung Derek, Ezutah Udoncy Olugu, Cik Suhana Binti Hassan, V. Karunamoothei and Kah Hou TengLecture Notes in Networks and Systems, Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering 335 33 (2022)
https://doi.org/10.1007/978-3-030-90532-3_3
Modeling and Optimization of Process Variables in Turning of Inconel 617 through Criteria Importance through Inter-Criteria and Weighted Aggregated Sum Product Assessment Methodology
Devendiran SundararajanSAE International Journal of Advances and Current Practices in Mobility 05 (4) 1653 (2022)
https://doi.org/10.4271/2022-28-0524
Role of Nanofluid Minimum Quantity Lubrication (NMQL) in Machining Application
Raj Shah, Khosro A. Shirvani, Alexandra Przyborowski, Nikhil Pai and Mohsen MoslehLubricants 10 (10) 266 (2022)
https://doi.org/10.3390/lubricants10100266
A review of recent advances in green nanofluids and their application in thermal systems
L. Harish Kumar, S.N. Kazi, H.H. Masjuki and M.N.M. ZubirChemical Engineering Journal 429 132321 (2022)
https://doi.org/10.1016/j.cej.2021.132321
State of the art on sustainable manufacturing using mono/hybrid nano-cutting fluids with minimum quantity lubrication
Vaibhav Singh, Anuj Kumar Sharma, Ranjeet Kumar Sahu and Jitendra Kumar KatiyarMaterials and Manufacturing Processes 37 (6) 603 (2022)
https://doi.org/10.1080/10426914.2022.2032147
Fuzzy logic and desirability based models for predicting performance characteristics of varying concentration graphite nanoplatelets (GNPs) mixed nanofluid MQL in turning of AISI-1045 steel
Ashish Goyal, Bhavya Kothari and Vimal Kumar PathakInternational Journal on Interactive Design and Manufacturing (IJIDeM) 16 (4) 1559 (2022)
https://doi.org/10.1007/s12008-022-01068-9
Comparative Performance Analysis of Coated Carbide Insert in Turning of Ti-6Al-4V ELI Grade Alloy under Dry, Minimum Quantity Lubrication and Spray Impingement Cooling Environments
Anurag, Ramanuj Kumar, Ashok Kumar Sahoo and Amlana PandaJournal of Materials Engineering and Performance 31 (1) 709 (2022)
https://doi.org/10.1007/s11665-021-06183-4
513 (2021)
https://doi.org/10.1007/978-3-030-77719-7_51
Evaluation of MQL performances using various nanofluids in turning of AISI 304 stainless steel
Youssef Touggui, Alper Uysal, Uğur Emiroglu, Salim Belhadi and Mustapha TemmarThe International Journal of Advanced Manufacturing Technology 115 (11-12) 3983 (2021)
https://doi.org/10.1007/s00170-021-07448-x
Castor Oil-Based Nanolubricants: An Overview
Jyoti Srivastava, Tandra Nandi and Rakesh K. TrivediAsian Journal of Chemistry 33 (12) 2884 (2021)
https://doi.org/10.14233/ajchem.2021.23450
MQL Machining with nano fluid: a review
Pralhad B. Patole, Vivek V. Kulkarni and Sudhir G. BhatwadekarManufacturing Review 8 13 (2021)
https://doi.org/10.1051/mfreview/2021011
Contribution of Factors such as Machining Parameters, MQL Nozzle Orientation (Angle & Distance) and MQL Nano-Fluid Type on Surface Finish of Turned Steel Work-Pieces Using DOE Approach
Miriyala Veerabhadrarao, Bhushan T. Patil, Vasim A. Shaikh and D.S.S. SudhakarMaterials Science Forum 1019 181 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1019.181
Performance evaluation of the nano-silver added vegetable-oil-based cutting fluid in drilling process
M Huseyin Cetin, Ayfer Kesen, Seyma Korkmaz and Sena Kabave KilincarslanSurface Topography: Metrology and Properties 8 (2) 025029 (2020)
https://doi.org/10.1088/2051-672X/ab96dc
Investigation of hard turning performance of eco-friendly cooling strategies: Cryogenic cooling and nanofluid based MQL
Çağrı Vakkas YıldırımTribology International 144 106127 (2020)
https://doi.org/10.1016/j.triboint.2019.106127
Effects of cutting fluids with nano-silver and borax additives on milling performance of aluminium alloys
M. Huseyin Cetin and Sena Kabave KilincarslanJournal of Manufacturing Processes 50 170 (2020)
https://doi.org/10.1016/j.jmapro.2019.12.042
Experimental investigations on the performance of nanoboric acid suspensions in coconut oil during milling operation on Al 6061-T6 alloy
T U Siddiqui and M K SinghIOP Conference Series: Materials Science and Engineering 988 (1) 012006 (2020)
https://doi.org/10.1088/1757-899X/988/1/012006
Experimental Studies on Machining EN45 Steel under Dry and MQL using Uncoated Inserts
Kosaraju Satynarayana, Gayam Sreenivas Reddy, Chitimilla Srikar, et al.E3S Web of Conferences 184 01014 (2020)
https://doi.org/10.1051/e3sconf/202018401014
Influence of Al2O3 and TiO2 nanofluid on hard turning performance
Ramanuj Kumar, Ashok Kumar Sahoo, Purna Chandra Mishra and Rabin Kumar DasThe International Journal of Advanced Manufacturing Technology 106 (5-6) 2265 (2020)
https://doi.org/10.1007/s00170-019-04754-3
Experimental investigations of vibration and acoustics signals in milling process using kapok oil as cutting fluid
Subramaniam Shankar, Murugasamy Manikandan, Gunasekaran Raja and Alokesh PramanikMechanics & Industry 21 (5) 521 (2020)
https://doi.org/10.1051/meca/2020066
Tribological and Thermal Transport of Ag-Vegetable Nanofluids Prepared by Laser Ablation
Jaime Taha-Tijerina, Sadasivan Shaji, Sreed Sharma Kanakkillam, Maria Isabel Mendivil Palma and Karla AviñaApplied Sciences 10 (5) 1779 (2020)
https://doi.org/10.3390/app10051779
A brief study on effects of nano cutting fluids in hard turning of AISI 4340 steel
Rabinarayan Bag, Amlana Panda, Ashok Kumar Sahoo and Ramanuj KumarMaterials Today: Proceedings 26 3094 (2020)
https://doi.org/10.1016/j.matpr.2020.02.640
Metal-oxide based nanofluid application in turning and grinding processes: A comprehensive review
Saswat Khatai, Ramanuj Kumar, Ashok Kumar Sahoo, Amlana Panda and Diptikanta DasMaterials Today: Proceedings 26 1707 (2020)
https://doi.org/10.1016/j.matpr.2020.02.360