Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

One-shot drilling process for thin CFRP/Aluminium alloys stacks

Martina Panico, Massimo Durante, Antonio Langella and Luca Boccarusso
Materials and Manufacturing Processes 1 (2024)
https://doi.org/10.1080/10426914.2024.2311383

3D FEA Simulations in Machining

Panagiotis Kyratsis, Anastasios Tzotzis and J. Paulo Davim
SpringerBriefs in Applied Sciences and Technology, 3D FEA Simulations in Machining 1 (2023)
https://doi.org/10.1007/978-3-031-24038-6_1

3D FEA Simulations in Machining

Panagiotis Kyratsis, Anastasios Tzotzis and J. Paulo Davim
SpringerBriefs in Applied Sciences and Technology, 3D FEA Simulations in Machining 47 (2023)
https://doi.org/10.1007/978-3-031-24038-6_3

3D FEA Simulations in Machining

Panagiotis Kyratsis, Anastasios Tzotzis and J. Paulo Davim
SpringerBriefs in Applied Sciences and Technology, 3D FEA Simulations in Machining 77 (2023)
https://doi.org/10.1007/978-3-031-24038-6_5

3D FEA Simulations in Machining

Panagiotis Kyratsis, Anastasios Tzotzis and J. Paulo Davim
SpringerBriefs in Applied Sciences and Technology, 3D FEA Simulations in Machining 63 (2023)
https://doi.org/10.1007/978-3-031-24038-6_4

3D FEA Simulations in Machining

Panagiotis Kyratsis, Anastasios Tzotzis and J. Paulo Davim
SpringerBriefs in Applied Sciences and Technology, 3D FEA Simulations in Machining 13 (2023)
https://doi.org/10.1007/978-3-031-24038-6_2

3D-FEM Approach of AISI-52100 Hard Turning: Modelling of Cutting Forces and Cutting Condition Optimization

Anastasios Tzotzis, Nikolaos Tapoglou, Rajesh Kumar Verma and Panagiotis Kyratsis
Machines 10 (2) 74 (2022)
https://doi.org/10.3390/machines10020074

A Study for Improved Prediction of the Cutting Force and Chip Shrinkage Coefficient during the SKD11 Alloy Steel Milling

Thi-Bich Mac, The-Thanh Luyen and Duc-Toan Nguyen
Machines 10 (4) 229 (2022)
https://doi.org/10.3390/machines10040229

Finite element simulation and regression modeling of machining attributes on turning AISI 304 stainless steel

A. Mathivanan, M.P. Sudeshkumar, R. Ramadoss, et al.
Manufacturing Review 8 24 (2021)
https://doi.org/10.1051/mfreview/2021022

CAD-Based 3D-FE Modelling of AISI-D3 Turning with Ceramic Tooling

Panagiotis Kyratsis, Anastasios Tzotzis, Angelos Markopoulos and Nikolaos Tapoglou
Machines 9 (1) 4 (2021)
https://doi.org/10.3390/machines9010004

Influence of the Nose Radius on the Machining Forces Induced during AISI-4140 Hard Turning: A CAD-Based and 3D FEM Approach

Anastasios Tzotzis, César García-Hernández, José-Luis Huertas-Talón and Panagiotis Kyratsis
Micromachines 11 (9) 798 (2020)
https://doi.org/10.3390/mi11090798