Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

A Numerical Analysis on the Metal Droplets Impacting and Spreading out on the Substrate

Li Suli, Wei Zhengying, Du Jun, Wei Pei and Lu Bingheng
Rare Metal Materials and Engineering 46 (4) 893 (2017)
https://doi.org/10.1016/S1875-5372(17)30118-2

Suspension and precursor solution plasma spraying by means of synchronous injection in a pulsed arc plasma

Fabrice Mavier, Vincent Rat, Marguerite Bienia, Martine Lejeune and Jean-Francois Coudert
Surface and Coatings Technology 318 18 (2017)
https://doi.org/10.1016/j.surfcoat.2016.08.061

Numerical study of Si nanoparticle formation by SiCl4hydrogenation in RF plasma

Christophe Rehmet, Tengfei Cao and Yi Cheng
Plasma Sources Science and Technology 25 (2) 025011 (2016)
https://doi.org/10.1088/0963-0252/25/2/025011

Processing Parameter Effects and Thermal Properties of Y2Si2O7 Nanostructured Environmental Barrier Coatings Synthesized by Solution Precursor Induction Plasma Spraying

Émilien Darthout, Guillaume Laduye and François Gitzhofer
Journal of Thermal Spray Technology 25 (7) 1264 (2016)
https://doi.org/10.1007/s11666-016-0450-4

Scrutiny of spray jet and impact characteristics under dispersion effects of powder injection parameters in APS process

Ridha Djebali, Mohammed ElGanaoui, Abdallah Jaouabi and Bernard Pateyron
International Journal of Thermal Sciences 100 229 (2016)
https://doi.org/10.1016/j.ijthermalsci.2015.09.027

Unsteady state analysis of free-burning arcs in a 3-Phase AC plasma torch: comparison between parallel and coplanar electrode configurations

C Rehmet, F Fabry, V Rohani, F Cauneau and L Fulcheri
Plasma Sources Science and Technology 23 (6) 065011 (2014)
https://doi.org/10.1088/0963-0252/23/6/065011

Experimental study on the formation of higher fluorocarbons from CF4 by a tip–tip electrical arc discharge at very high pressure

Samuel A. Iwarere, Alexandre Lebouvier, Laurent Fulcheri and Deresh Ramjugernath
Journal of Fluorine Chemistry 166 96 (2014)
https://doi.org/10.1016/j.jfluchem.2014.07.027

Influence of water and ethanol on transport properties of the jets used in suspension plasma spraying

Bernard Pateyron, Nicolas Calve and Lech Pawłowski
Surface and Coatings Technology 220 257 (2013)
https://doi.org/10.1016/j.surfcoat.2012.10.010

A lattice Boltzmann based investigation of powder in-flight characteristics during APS process, part II: Effects of parameter dispersions at powder injection

Ridha Djebali, Bernard Pateyron and Mohamed El Ganaoui
Surface and Coatings Technology 220 157 (2013)
https://doi.org/10.1016/j.surfcoat.2013.01.001

3D magnetohydrodynamic modelling of a dc low-current plasma arc batch reactor at very high pressure in helium

A Lebouvier, S A Iwarere, D Ramjugernath and L Fulcheri
Journal of Physics D: Applied Physics 46 (14) 145203 (2013)
https://doi.org/10.1088/0022-3727/46/14/145203

Modeling of phenomena occurring in plasma jet during suspension spraying of hydroxyapatite coatings

Bernard Pateyron, Lech Pawłowski, Nicolas Calve, Guy Delluc and Alain Denoirjean
Surface and Coatings Technology 214 86 (2013)
https://doi.org/10.1016/j.surfcoat.2012.11.006

Two-temperature chemically non-equilibrium modelling of transferred arcs

M Baeva, R Kozakov, S Gorchakov and D Uhrlandt
Plasma Sources Science and Technology 21 (5) 055027 (2012)
https://doi.org/10.1088/0963-0252/21/5/055027

Experimental characterization of an argon laminar plasma jet at atmospheric pressure

Emilie Langlois-Bertrand and Charles de Izarra
Journal of Physics D: Applied Physics 44 (41) 415201 (2011)
https://doi.org/10.1088/0022-3727/44/41/415201

Optimisation de la distance de tir en projection cold spray

François Raletz, Guillaume Ezo’o, Samuel Germain, Michel Vardelle and Gilles Mariaux
Mécanique & Industries 12 (6) 533 (2011)
https://doi.org/10.1051/meca/2011142

Dimensionnement et réalisation d’un générateur à plasma d’arc à air de faible puissance (2 kW)

Abderrahmane Halis, Bernard Pateyron and Mohammed El Ganaoui
Mécanique & Industries (2011)
https://doi.org/10.1051/meca/2011100

Numerical Investigation of a Hybrid HVOF-Plasma Spraying Process

B. Martinez, G. Mariaux, A. Vardelle, G. Barykin and M. Parco
Journal of Thermal Spray Technology 18 (5-6) 909 (2009)
https://doi.org/10.1007/s11666-009-9398-y

A non-thermal plasma process for the gas phase synthesis of carbon nanoparticles

M. Moreno-Couranjou, M. Monthioux, J. Gonzalez-Aguilar and L. Fulcheri
Carbon 47 (10) 2310 (2009)
https://doi.org/10.1016/j.carbon.2009.04.003

Thermodynamics and Kinetics Analysis of Gasoline Reforming Assisted by Arc Discharge

Jean-Damien Rollier, Guillaume Petitpas, José Gonzalez-Aguilar, et al.
Energy & Fuels 22 (3) 1888 (2008)
https://doi.org/10.1021/ef700665f

The role of radiation in modelling of argon inductively coupled plasmas at atmospheric pressure

J G Lacombe, Y Delannoy and C Trassy
Journal of Physics D: Applied Physics 41 (16) 165204 (2008)
https://doi.org/10.1088/0022-3727/41/16/165204