Open Access
Issue
Mécanique & Industries
Volume 5, Number 4, Juillet-Août 2004
Page(s) 355 - 368
DOI https://doi.org/10.1051/meca:2004036
Published online 28 September 2005
  1. H. Schultz, State of the art of high speed machining, First french and german Conference on high speed machining (1997) 1–7 [Google Scholar]
  2. www.trametal.com, Usinage dur et à grande vitesse : PCD et CBN deviennent tenaces, La Revue Technique du Travail des Métaux (2003) 7–12 [Google Scholar]
  3. H. Pastor, The evolution of cutting tool materials, Bulletin du Cercle d'Études des Métaux, n° 13, Novembre 1996, 7.1–7.11 [Google Scholar]
  4. G. Schneider Jr, Cutting tool applications, Chapitre 1, Prentice-Hall Publication, 2002, pp. 2–65 [Google Scholar]
  5. G. Brandt, A. Gerendas, M. Mikus, Wear mechanisms of ceramic cutting tools when machining ferrous and non-ferrous alloys, J. Europ. Ceram. Soc. 6(5) (1990) 273–290 [CrossRef] [Google Scholar]
  6. A. Senthil Kumar, A. Raja Durai, T. Sornanakumar, Machinability of hardened steel using alumina-based ceramic cutting tools, Int. J. Refrac. Metals & Hard Mater. 21 (2003) 109–117 [CrossRef] [Google Scholar]
  7. P. Chancel, Les nouveaux outils coupants, CETIM Informations, 147, Février 1996 [Google Scholar]
  8. J.L. Hug, Tournage des métaux durs, Machine de production 110 (1995) 17–19 [Google Scholar]
  9. J.R. Ferreira, N.L. Coppini, F. Levy Neto, Caracteristics of carbon-carbon composite turning, J. Mater. Process. Technol. 109 (2001) 65–71 [CrossRef] [Google Scholar]
  10. G. Poulachon, A. Moisan, Performance evaluation on hardened steel-PCBN tool pair in high speed turning, Matériaux et Techniques 1–2 (2003) 23–34 [Google Scholar]
  11. Y.K. Chou, Hard turning of M50 steel with different microstructures in continuous and intermittent cutting, Wear 225 (2003) 1388–1394 [CrossRef] [Google Scholar]
  12. F. Nabahani, Wear mechanisms of ultra-hard cutting tools materials, J. Mater. Process. Technol. 115 (2001) 402–412 [CrossRef] [Google Scholar]
  13. K. Konig, Machining of hard materials, Annals of the CIRP (1984) 417–427 [Google Scholar]
  14. Z. A. Zoya, R. Krishnamurthy, The performance of CBN tools in the machining of titanium alloys, J. Mater. Process. Technol. 100 (2000) 80–86 [CrossRef] [Google Scholar]
  15. S.Y Luo, Y.S Lias, Y.Y Tsai, Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools, J. Mater. Process. Technol. 88 (1999) 114–121 [CrossRef] [Google Scholar]
  16. A.R.C. Sharman, D.K. Aspinwall, R.C. Dewew, P. Bowen, Workpiece surface integrity considerations when finish turning gamma titanium aluminide, Wear 249 (2001) 473–481 [CrossRef] [Google Scholar]
  17. S.S. Joshi, N. Ramakrishnan, P. Ramakrishnan, Analysis of chip breaking during orthogonal machining of Al/SiCp composites, J. Mater. Process. Technol. 88 (1999) 90–96 [CrossRef] [Google Scholar]
  18. X.J. Ren, R.D. James, E.J. Brookes, L. Wang, Machining of high chromium hardfacing materials, J. Mater. Process. Technol. 115 (2001) 423–429 [CrossRef] [Google Scholar]
  19. Norme Internationale ISO 3685-1977 (F), Tool-life testing with single-point turning tools, Première édition, 1977, pp. 5–15 [Google Scholar]
  20. I. Andonov, Y. Bekech, Analyse et synthèse des processus technologiques en construction mécanique, Technica, Sofia 1984 [Google Scholar]
  21. B. Clément, Design and analysis of experiments, Génistat Conseils Inc., 2000 [Google Scholar]
  22. Y.K. Chou, C.J. Chris, M.M. Barash, Experimental investigation on CBN turning of hardened AISI 52100 steel, J. Mater. Process. Technol. 124 (2002) 274–283 [CrossRef] [Google Scholar]
  23. G. Poulachon, Aspects phénoménologiques, mécaniques et métallurgiques en tournage CBN des aciers durcis, Thèse, ENSAM de Cluny, 1999 [Google Scholar]
  24. J. Kopac, Hardening phenomena of Mn-austenite steels in the cutting process, J. Mater. Process. Technol. 109 (2001) 96–104 [CrossRef] [Google Scholar]
  25. D. O'sullivan, M. Cotterell, Temperature measurement in single point turning, J. Mater. Process. Technol. 118 (2001) 301–308 [CrossRef] [Google Scholar]
  26. M. Bacci da Silva, J. Wallbank, Cutting temperature prediction and measurement methods-a review, J. Mater. Process. Technol. 88 (1999) 195–202 [CrossRef] [EDP Sciences] [Google Scholar]
  27. E.-G. Ng, D.K. Aspinwall, D. Brazil, J. Monaghan, Modelling of temperature and forces when orthogonally machining hardened steel, Int. J. Machine Tools and Manufacture 39 (1999) 885–903 [CrossRef] [Google Scholar]
  28. S. Enache, La qualité des surfaces usinées, Dunod, Paris, 1972 [Google Scholar]
  29. J. Calderon, Caractérisation dynamique du système pièce-outil-machine: Usinage des pièces minces, Thèse, INSA de Lyon, 1998 [Google Scholar]
  30. C. Bedrin, B. Roumesy, Usinage par outil coupant, Fascicule 1-2, INSA-Lyon, 1989 [Google Scholar]
  31. J.D. Thiele, S.N. Melkote, Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel, J. Mater. Process. Technol. 94 (1999) 216–226 [CrossRef] [Google Scholar]
  32. M. Kaufeld, S.Torbaty, Rationalisation de l'usinage très grande vitesse, SOFETEC, Paris, 1999 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.