Open Access
| Issue |
Mécanique & Industries
Volume 6, Number 2, Mars-Avril 2005
|
|
|---|---|---|
| Page(s) | 211 - 225 | |
| DOI | https://doi.org/10.1051/meca:2005022 | |
| Published online | 21 April 2005 | |
- IS & CETIM, Rechargement par soudage des outillages de forge à chaud : Guide pour la rédaction d'un programme de rechargement par soudage à l'arc des outillages de forge à chaud, 1995 [Google Scholar]
- E.O. Ezugwu, Z.M. Wang, A.R. Machado, The machinability of nickel-based alloys: a review, J. Materials Processing Technology 86 (1999) 1–16 [Google Scholar]
- E.O. Ezugwu, I.R. Pashby, High speed milling of nickel-based superalloys, J. Materials Processing Technology 33 (1992) 429–437 [CrossRef] [Google Scholar]
- CETIM, Les atouts de l'usinage à grande vitesse : Fraisage et perçage des métaux durs, 1996 [Google Scholar]
- T. Kitagawa, A. Kubo, K. Maekawa, Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn, wear 202 (1997) 142–148 [Google Scholar]
- B.V. Cockerman, The Fracture toughness and Toughening Mechanisms of nickel-base wear materials, J. Metall. Mater. Trans. A 33 (2002) 33–56 [CrossRef] [Google Scholar]
- ASTM E399-90, Standard Test Method for Plane-Stain Fracture Toughness of Metallic Materials, Annual Book of ASTM Standards, 1990 [Google Scholar]
- D. François, L. Joly, La rupture des métaux, Masson et compagnie, 238, 1972 [Google Scholar]
- B.V. Cockerman, R.F. Buck, W.L. Wilson, Laboratory galling of several commercial cobalt-free weld hardfacing alloys, Surface and Coatings Technology 94–95 (1997) 495–500 [Google Scholar]
- ASTM G98, Standard Test Method for Galling Resistance of Materials, Annual Book of ASTM Standards 03-02 (1992) [Google Scholar]
- X.J. Ren, R.D. James, E.S. Brookes, L. Wang, Machining of high chromium hardfacing materials, J. Materials Processing Technology 115 (2001) 423–429 [CrossRef] [Google Scholar]
- AFNOR NF E 66-505, Essai de durée de vie des outils de tournage à partie active unique, NF E 66-505 (1993) [Google Scholar]
- G. Poulachon, Aspects phénoménologiques, mécaniques et métallurgiques en tournage c-BN des aciers durcis, Thèse, École nationale supérieure d'arts et métiers de Cluny, 1999 [Google Scholar]
- F. Le Maître, Relations entre énergies de coupe et endommagement des outils de coupe, Wear 62 (1980) 139–160 [CrossRef] [Google Scholar]
- M.C. Shaw, Metal Cutting Principles, Clarendon Press, Oxford, 1984 [Google Scholar]
- R. Komanduri, R.H. Brown, The mechanisms of chip segmentation in machining, ASME J. Engineering for Industry 103 (1981) 33–51 [Google Scholar]
- R. Komanduri, T. Schroeder, B.F. Von Turkovich, J. Hazra, D.G. Flom, On the catastrophic shear instability in high speed machining of an AISI4340 steel, ASME J. Engineering for Industry 104 (1982) 121–131 [Google Scholar]
- H. Schultz, Fraisage grande vitesse des matériaux métalliques et non métalliques, Société Française d'Éditions techniques SOFETEC, Boulogne, 1997 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.