Open Access
Issue |
Mécanique & Industries
Volume 8, Number 3, Mai-Juin 2007
Congrès Mécanique de Grenoble
|
|
---|---|---|
Page(s) | 267 - 278 | |
DOI | https://doi.org/10.1051/meca:2007048 | |
Published online | 17 August 2007 |
- M. Clement, L. Vergara, J. Sangrador, E. Iborra, A. Sanz-Hervas, SAW characteristics of AlN films sputtered on silicon substrates, Ultrasonics 42 (2004) 403–407 [CrossRef] [PubMed] [Google Scholar]
- T. Palacios, F. Calle, E. Monroy, J. Grajal, M. Eickhoff, O. Ambacher, C. Prieto, Nanotechnology for SAW devices on AIN epilayers, Mat. Sci. and Eng. B 93 (2002) 154–158 [CrossRef] [Google Scholar]
- Ju-Hyung Kim, Si-Hyung Lee, Jin-Ho Ahn, Jeon-Kook Lee, AlN piezoelectric materials for wireless communication thin film components, J. Ceram. Processing Research 3 (2002) 25–28 [Google Scholar]
- K.M. Lakin, J. Belsick, J.F. McDonald, K.T. McCarron, Improved bulk wave resonator coupling coefficient for wide bandwidth filters, IEEE Ultrasonics Symp. 9 (2001) 3E-5 [Google Scholar]
- A. Choujaa, N. Tirole, C. Bonjour, G. Martin, D. Hauden, P. Blint, A. Cachard, C. Pommier, AlN/silicon Lamb-wave microsensors for pressure and gravimetry measurements, Sens. and Actuators A 46–47 (1995) 179–182 [CrossRef] [Google Scholar]
- T. Laurent, F.O. Bastien, J.-C. Pommier, A. Cachard, D. Remiens, E. Cattan, Lamb wave and plate mode in ZnO/silicon and AIN/silicon membrane, Application to sensors able to operate in contact with liquid, Sens. and Actuators A 87 (2000) 26–37 [CrossRef] [Google Scholar]
- D. Ruffieux, M.A. Dubois, N.F. de Rooij, An AIN piezoelectric microactuator array, IEEE MicroElectro Mech. Syst., Miyazaki, Japan, Jan. 23–27 (2000) 662–667 [Google Scholar]
- M.A. Dubois, P. Muralt, Properties of AlN thin films for piezoelectric transducers and microwave filter applications, Appl. Phys. Lett. 74 (1999) 3032–3034 [CrossRef] [Google Scholar]
- S. Bargiel, D. Heinis, C. Gorecki, A. Gôrecka-Drzazga, J.A. Dziuban, M. Jôzwik, A micromachined silicon-based probe for a scanning near-field optical microscope on-chip, Measurement Sci. Techn. 17 (2006) 32–37 [CrossRef] [Google Scholar]
- M. Ishihara, S.J. Li, H. Yumoto, K. Akashi, Y. Ide, Control of preferential orientation of AlN films prepared by the reactive sputtering method, Thin Solid Films 316 (1998) 152–157 [CrossRef] [Google Scholar]
- X.H. Xu, H.S. Wu, C.J. Zhang, Z.H. Jin, Morphological properties of AlN piezoelectric thin films deposited by DC reactive magnetron sputtering, Thin Solid Films 388 (2001) 62–67 [CrossRef] [Google Scholar]
- M. Akiyama, C.N. Xu, K. Nonaka, K. Shoku, T. Watonabe, Statistical approach for optimizing sputtering conditions of highly oriented aluminium nitride thin films, Thin Solid Films 315 (1998) 62–65 [CrossRef] [Google Scholar]
- K. Kusaka, D. Taniguchi, T. Hanakusa, K. Tomiraga, Effect of input power on crystal orientation an residual stress in AlN film deposited by DC sputtering, Vacuum 59 (2000) 806–813 [CrossRef] [Google Scholar]
- M.A. Auger, L. Vazquez, M. Jergel, O. Sanchez, J.M. Albella, Structure and morphology evolution of AlN films grown by DC sputtering, Surf. Coat. Techn. 180–181 (2004) 140–144 [CrossRef] [Google Scholar]
- V.M. Pantojas, W. Otano-Rivera, J.W. Caraballe, Statistical analysis of the effect of deposition parameters on the preferred orientation of sputtered AlN films, Thin Solid Films 492 (2005) 118–123 [CrossRef] [Google Scholar]
- C. Gorecki, M. Jôzwik, L. Salbut, Multifunctional interferometric platform for on-chip testing the micromechanical properties of MEMS/MOEMS, J. Microlithography, Microfabrication, and Microsystems 4 (2005), 1–10 [Google Scholar]
- L. Salbut, K. Patorski, M. Jôzwik, J. Kacperski, C. Gorecki, A. Jacobelli, T. Dean, Active microelement testing by interferometry using time-average and quasi-stroboscopic techniques, SPIE Microsystems Eng.: Metrology and Inspection III 5145 (2003) 23–32 [Google Scholar]
- W.C. Oliver, G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res. 1 (1992) 1564–1583 [NASA ADS] [CrossRef] [Google Scholar]
- M.S. Bobji, S.K. Biswas, Hardness of a surface containing uniformly spaced pyramidal asperities, Trib. Lett. 7 (1999) 51–56 [CrossRef] [Google Scholar]
- M. Qasmi, P. Delobelle, Influence of the average roughness Rms on the precision of the Young's modulus and hardness determination using nano-indentation technique with a Berkovich indenter, Surf. Coat. Techn. 201 (2006) 1191–1199 [Google Scholar]
- G.G. Stoney, The tension of metallic films deposited by electrolysis, Proc. R. Soc. London Serie A 82 (1909) 172 [Google Scholar]
- K. Röll, Analysis of stress and strain distribution in thin films and substrates, J. Appl. Phys. 47 (7) (1976) 3224–3229 [Google Scholar]
- P.H. Townsend, D.M. Barnett, T.A. Brunner, Elastic relationships in layered composite media with approximation for the case of thin films on a thick substrate, J. Appl. Phys. 62 (1987) 4438–4444 [CrossRef] [Google Scholar]
- J.H. Jou, L. Hsu, Stress analysis of elastically anisotropic bilayer structures, J. Appl. Phys. 69 (1991) 1384–1388 [CrossRef] [Google Scholar]
- J.G. Smits, W.S. Choi, The constituent equations of piezoelectric heterogeneous bimorphs, IEEE Trans. Ultrasonics, Ferroelectrics and Frequency Control 38 (1991) 256–270 [CrossRef] [Google Scholar]
- Q.M. Wang, L.E. Cross, Constitutive equations of symmetrical triple layer piezoelectric benders, IEEE Trans. Ultrasonics, Ferroelectrics and Frequency Control 46 (1999) 1343–1351 [CrossRef] [Google Scholar]
- K. Yao, W. Zhu, K. Uchino, Z. Zhang, L.C. Lim, Design and fabrication of a high performance multilayer piezoelectric actuator with bending deformation, IEEE Trans. Ultrasonics, Ferroelectrics and Frequency Control 46 (1999) 1020–1027 [CrossRef] [Google Scholar]
- S.H. Chang, C.C. Chou, Electromechanical analysis of an asymmetric piezoelectric elastic laminate structure: Theory and experiment, IEEE Trans. Ultrasonics, Ferroelectrics and Frequency Control 46 (1999) 441–451 [CrossRef] [Google Scholar]
- V. Walter, Thesis Univ. Franche-Comté, Caractérisation et modélisation électromécanique de dépots de couches épaisses sérigraphiées sur substrat d'alumine, Application au contrôle de forme et à l'amortissement actif d'un bimorphe, 2001 [Google Scholar]
- V. Walter, P. Delobelle, P. Le Moal, E. Joseph, E. Collet, A piezo-mechanical characterization of PZT thick films screen-printed on alumina substrate, Sens. and Actuators A 96 (2002) 157–166 [CrossRef] [Google Scholar]
- J.J. Vlassak, W.D. Nix, Measuring the elastic properties of anisotropic materials by means of indentation experiments, J. Mech. Phys. Sol. 42 (1994) 1223-1245 [Google Scholar]
- J.J. Vlassak, W.D. Nix, Indentation modulus of elastically anisotropic half-spaces, Phil. Magn. A 67 (1993) 1045–1056 [Google Scholar]
- A. Delafargue, F.J. Ulm, Explicit approximations of the indentation modulus of elastically orthotropic solids for conical indenters, Int. J. Solids Struct. 41 (2004) 7351–7360 [Google Scholar]
- P. Delobelle, E. Fribourg-Blanc, D. Remiens, Mechanical properties determined by nanoindentation tests of PZT and PMNT sputtered thin films, Thin Solid Films 515 (2006) 1385–1393 [CrossRef] [Google Scholar]
- G. Carlotti, F.S. Hickernell, H.M. Liaw, L. Palmieri, G. Socino, E. Verona, The elastic constants of sputtered aluminium nitride films, IEEE Ultrasonics Symp. 1 (1995) 353–356 [Google Scholar]
- K. Tsubouchi, K. Sugai, N. Mikoshida, AIN material constants evaluation and SAW properties on AlN/Al203 and AlN/Si, IEEE Ultrasonics Symp. 1 (1981) 375–380 [Google Scholar]
- A.F. Wright, Elastic properties of zinc-blende and wurtzite AIN, GaN and InN, J. Appl. Phys. 82 (1997) 2833–2839 [CrossRef] [Google Scholar]
- L. Robert, P. Delobelle, Internal report, unpublished work, 2001 [Google Scholar]
- R.B. King, Elastic analysis of some punch problems for layered medium, Int. J. Solids Struct. 23 (1987) 1657–1664 [CrossRef] [Google Scholar]
- R. Saha, W.D. Nix, Effects of the substrate on the determination of thin film mechanical properties by nano-indentation, Acta Mater. 50 (2002) 23–28 [Google Scholar]
- Z. Xue, Y. Huang, K.C. Hwang, M. Li, The influence of indenter tip radius on the micro-indentation hardness, J. Eng. Mat. Techn. 124 (2002) 371–379 [Google Scholar]
- Q.M. Wang, Y. Ding, Q. Chen, M. Zhao, J. Cheng, Crystalline orientation dependence of nanomechanical properties of Pb (Zr Ti) 03 thin films, Appl. Phys. Lett. 86 (2005) 162903 [CrossRef] [Google Scholar]
- P. Delobelle, G.S. Wang, E. Fribourg-Blanc, D. Remiens, Indentation modulus and hardness of Pb (Zr Ti) 03 sol-gel films deposited on Pt and LuNi03 electrodes. An estimation of the Cij compliances, J. Europ. Ceram. Soc. 27 (2007) 223–230 [CrossRef] [Google Scholar]
- W. Xiao, X. Jiang, Optical and mechanical properties of nanocrystalline aluminium oxynitride films prepared by electron cyclotron resonance plasma enhanced chemical vapor deposition, J. Crystal Growth 264 (2004) 165–171 [CrossRef] [Google Scholar]
- S. Dagdag, J. Alexis, J.D. Beguin, J.A. Petit, M. Ferrato, J. Durand, Propriétés mécaniques de revêtements d'AlN sur carbure de silicium fritté par dépôt chimique en phase vapeur assisté plasma, Matériaux 2006, 13–17 Nov. 2006, Dijon, France [Google Scholar]
- W.J. Meng, J.A. Sell, G.L. Eesley, T.A. Perry, Measurement of intrinsic stresses during growth of aluminium nitride thin films by reactive sputter deposition, J. Appl. Phys. 74 (1993) 2411–2414 [CrossRef] [Google Scholar]
- A. Andrei, K. Krupa, M. Jozwik, L. Nieradko, C. Gorecki, L. Hirsinger, P. Delobelle, Fabrication, characterization and reliability study of AlN driven cantilevers, Proc. of SPIE, vol. 6188 April 2006, Strasbourg [Google Scholar]
- www.ceramic_center.com/cttc_pdf/nitrure_al.pdf [Google Scholar]
- MEMS and Nanotechnology Clearinghouse, www.memsnet.org/material/aluminiumnitride, MEMS Exchange (2001) [Google Scholar]
- L.L. Guy, S. Muensit, E.M. Goldys, Extensional piezoelectric coefficients of gallium nitride and aluminium nitride, Appl. Phys. Lett. 75 (1999) 4133–4135 [CrossRef] [Google Scholar]
- C.M. Lueng, H.L.W. Chan, S. Surya, C.L. Choi, Piezoelectric coefficient of aluminium nitride and gallium nitride, J. Appl. Phys. 88 (2000) 5360–5363 [CrossRef] [Google Scholar]
- C.J. Ho, T.K. Shing, P.C. Li, Preferred orientation control and characterization of AlN thin films using reactive sputtering, J. Mat. Sci. and Eng. 7 (2004) 1–4 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.