Open Access
Issue
Mécanique & Industries
Volume 10, Number 5, Septembre-Octobre 2009
Page(s) 325 - 335
DOI https://doi.org/10.1051/meca/2009067
Published online 10 November 2009
  1. W. An, H. Saadatmanesh, M.-R. Ehsani, RC beam strengthened with FRP plates: II. Analysis and parametric study, ASCE J. Struct. Eng. 117 (1991) 3434–3455 [CrossRef] [Google Scholar]
  2. F. Seibel, M.-J.-N. Priestley, G.-A. Hegemier, Seismic retrofit of RC columns with continuous carbon fibre jackets, J. Comp. Const. 1 (1997) 52–62 [CrossRef] [Google Scholar]
  3. A. Hamoush, S.-H. Ahmed, Concrete crack repair by stitches, J. Mater. Struct. 30 (1997) 418–423 [CrossRef] [Google Scholar]
  4. J.-S.-E. Connor, New York State gives FRP's a try: Structure Magazine, Summer 1999 [Google Scholar]
  5. K.-T. Lau, L.-M. Zhou, C.-H. Woo, Strengthening and strain monitoring concrete structures using fibreglass composites and FBG sensor, J. Mater. Sci. Res. Int. 5 (1999) 216–221 [Google Scholar]
  6. Z. Wu, T. Matsuzaki, K. Tanabe, Interface crack propagation in FRP-Strengthened concrete structures. Non-metallic (FRP) reinforcement for concrete structures, Japan concrete inst. 1 (1997) 319–326 [Google Scholar]
  7. K.-R. Jones, R.-N. Swamy, A. Charif, Plate separation and anchorage of reinforced concrete beams strengthened by epoxy-bonded steel plates, struct. Eng. 66 (1988) 85–94 [Google Scholar]
  8. T.-M. Roberts, Approximate analysis of shear and normal stress concentrations in adhesive layer of plated RC beams, Struct. Eng. London 67 (1989) 229–233 [Google Scholar]
  9. T.-M. Roberts, H. Haji-Kazemi, Theoretical study of the behaviour of reinforced concrete beams strengthened by externally bonded steel plates, Proc. Int. Civil Eng. 87 (1989) 39–55 [Google Scholar]
  10. D.-J. Oehlers, Reinforced concrete beams with plates glued to their soffits, J. Strut. Eng. ASCE 118 (1992) 2023–2038 [CrossRef] [Google Scholar]
  11. M.-H. Baluch, Y.-N. Ziraba, A.-M. Sharif, G.-J. Al-Sulaimani, Shear strength of plated RC beams, Mag. Concr. Res. 47 (1995) 369–374 [CrossRef] [Google Scholar]
  12. M. Raoof, J.-A. El-Rimawi, M.-A.-H. Hassanen, Theoretical and experimental study on externally plated RC beams, Eng. Strut. 22 (2000) 85–101 [CrossRef] [Google Scholar]
  13. F. Yuan, J.-G. Teng, R. Seracino, Z.-S. Wu, Full-Rang behaviour of FRP- to-concrete bonded joints, Eng. Struct. 26 (2004) 553–565 [CrossRef] [Google Scholar]
  14. A.-M. Malek, H. Saadatmanesh, M.-R. Ehsani, Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end, ACI Strut. J. 95 (1998) 142–152 [Google Scholar]
  15. H. Saadatmanesh, A.-M. Malek, Design guidelines for flexural strengthening of RC beams with FRP plates, J. Compos. Construct. ASCE 2 (1998) 158–164 [CrossRef] [Google Scholar]
  16. T.-C. Triantafillou, C.-P. Antonopoulos, Design of concrete flexural members strengthened in shear with FRP, ASCE J. Compos. Construct. 4 (2000) 198–205 [CrossRef] [Google Scholar]
  17. U. Meier, R. Betti (eds.), Recent Advances in Bridge Strengthening, Proc. US-Canada- Europe Workshop, Dubendorf 1997, EMPA [Google Scholar]
  18. J.-F. Chen, J.-G. Teng, Anchorage strength models for FRP and steel plates bonded to concrete, ASCE J. Struct. Eng. 127 (2000) 784–791 [CrossRef] [Google Scholar]
  19. B. Gao, C.-K.-Y. Leung, J.-K. Kim, Prediction of concrete cover separation failure for RC beams strengthened with CFRP strips, Eng. Struct. 27 (2005) 1771–1789 [Google Scholar]
  20. L. Ascione, L. Feo, Modelling of composite/concrete interface of RC beams strengthened with composite laminates. Compos: Part B 31 (2000) 535–540 [Google Scholar]
  21. J.-G. Smith, J. Teng, Interfacial stresses in plated beams, Eng. Struct. 23 (2001) 857–871 [CrossRef] [Google Scholar]
  22. K.-T. Lau, P.-K. Dutta, L.-M. Zhou, Mechanics of bond in a FRP boned concrete beam, J. compos. part B 32 (2001) 491–502 [CrossRef] [Google Scholar]
  23. O. Rabinovich, Y. Frostig, Closed-from high order analysis of RC beams strengthened with FRP J. Compos. Construct. ASCE 4 (2000) 65–74 [Google Scholar]
  24. O. Rabinovich, Y. Frostig, On edge stresses control in strengthened RC beams with FRP strips: adhesive layer profile effect, J. Eng. Mech. ASCE 127 (2001) 317–325 [CrossRef] [Google Scholar]
  25. O. Rabinovich, Y. Frostig, Delamination failure of RC beams strengthened with FRP strips: a closed-form high order and fracture mechanics approach, J. Eng. Mech. ASCE 127 (2001) 852–861 [CrossRef] [Google Scholar]
  26. H.-S. Shen, J.-G. Teng, J. Yang, Interfacial stresses in beams and slabs bonded with a thin plate, J. Eng. Mech. ASCE 127 (2001) 399–406 [CrossRef] [Google Scholar]
  27. M.-Y. Tsai, D.-W. Oplinger, Improved theoretical solutions for adhesive lap joint, Int. J. solids struct. 35 (1998) 1165–1185 [Google Scholar]
  28. A. Tounsi, Improved theoretical solution for Interfacial stresses in concrete beams strengthened with FRP plate, J. Solids Struct. 43 (2006) 4154–4174 [CrossRef] [Google Scholar]
  29. C.-T. Herakovich, Mechanic of fibrous composites, Wiley USA, 1998 [Google Scholar]
  30. M.-W. Hyer, Stress Analysis of fibre-reinforced composite material, McGraw Hill, USA, 1998 [Google Scholar]
  31. S.-N. Denton, Analysis of stresses developed, in FRP plated beams due to thermal effects, in: Proceeding of the conference on composites in civil engineering, Hong Kong, 2001, pp. 527–536 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.