Open Access
Issue
Mechanics & Industry
Volume 13, Number 2, 2012
Page(s) 89 - 96
DOI https://doi.org/10.1051/meca/2012003
Published online 04 May 2012
  1. G.N. Levy, R. Schindel, J. Kruth, Rapid prototyping and manufacturing technology : principle, representative technics, applications, and development trends, CIRP Annals – Manuf. Technol. 52 (2003) 589–609 [CrossRef] [Google Scholar]
  2. D. Pham, R. Gault, A comparison of rapid prototyping technologies, Int. J. Machine Tools Manuf. 38 (1998) 1257–1287 [CrossRef] [Google Scholar]
  3. J. Kruth, G. Levy, F. Klocke, T. Childs, Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Annals – Manuf. Technol. 56 (2007) 730–759 [CrossRef] [Google Scholar]
  4. S. Kumar, J. Kruth, Effect of bronze infiltration into laser sintered metallic parts, Materials & Design 28 (2007) 400–407 [CrossRef] [Google Scholar]
  5. P.J. Kruth, B. Vandenbroucke, I.J. van Vaerenbergh, P. Mercelis, Benchmarking of different SLS/SLM processes as rapid manufacturing techniques, 2005 [Google Scholar]
  6. I. Yadroitsev, A. Gusarov, I. Yadroitsava, I. Smurov, Single track formation in selective laser melting of metal powders, J. Mater. Proc. Technol. 210 (2010) 1624–1631 [CrossRef] [Google Scholar]
  7. I. Yadroitsev, P. Bertrand, I. Smurov, Parametric analysis of the selective laser melting process, Appl. Surf. Sci. 253 (2007) 8064–8069 [CrossRef] [Google Scholar]
  8. W. Lu, F. Lin, J. Han, H. Qi, N. Yan, Scan strategy in electron beam selective melting, Tsinghua Science & Technology 14 (2009) 120–126 [CrossRef] [Google Scholar]
  9. F. Xu, Y.S. Wong, H.T. Loh, Toward generic models for comparative evaluation and process selection in rapid prototyping and manufacturing, J. Manuf. Sys. 19 (2001) 283–296 [CrossRef] [Google Scholar]
  10. D. Scaravetti, P. Dubois, R. Duchamp, Qualification of rapid prototyping tools : proposition of a procedure and a test part, Int. J. Adv. Manuf. Technol. 38 (2007) 683–690 [CrossRef] [Google Scholar]
  11. D. Ahn, H. Kim, S. Lee, Surface roughness prediction using measured data and interpolation in layered manufacturing, J. Mater. Proc. Technol. 209 (2009) 664–671 [CrossRef] [Google Scholar]
  12. H. Kim, K. Choi, Y. Doh, D. Kim, Fabrication of parts and their evaluation using a dual laser in the solid freeform fabrication system, J. Mater. Proc. Technol. 209 (2009) 4857–4866 [CrossRef] [Google Scholar]
  13. J. Kruth, L. Froyen, M. Rombouts, J. Van Vaerenbergh, P. Mercells, New ferro powder for selective laser sintering of dense parts, CIRP Annals – Manufacturing Technology 52 (2003) 139–142 [CrossRef] [Google Scholar]
  14. A. Yakovlev, E. Trunova, D. Grevey, M. Pilloz, I. Smurov, Laser-assisted direct manufacturing of functionally graded 3D objects, Surface and Coatings Technology 190 (2005) 15–24 [CrossRef] [Google Scholar]
  15. L. Murr et al., Microstructures and mechanical properties of electron beam-rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V, Materials Characterization 60 (2009) 96–105 [CrossRef] [Google Scholar]
  16. S. Biamino et al., Electron beam melting of Ti-48Al-2Cr-2Nb alloy : Microstructure and mechanical properties investigation, Intermetallics [Google Scholar]
  17. O. Diegel, S. Singamneni, S. Reay, A. Withell, Tools for Sustainable product design : additive manufacturing, J. Sustainable Development 3 (2010) 68–75 [Google Scholar]
  18. K. Kellens, W. Dewulf, E. Yasa, J. Duflou, Environmental analysis of SLM and SLS manufacturing processes, Proceeding of the 17th CIRP International Conference on Life Cycle Engineering, 17 location : Hefei, China date : 2010, pp. 423–428 [Google Scholar]
  19. I. Yadroitsev, L. Thivillon, P. Bertrand, I. Smurov, Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder, Appl. Surf. Sci. 254 (2007) 980–983 [CrossRef] [Google Scholar]
  20. R. Bonnard, P. Mognol, J. Hascoët, A new digital chain for additive manufacturing processes, Virt. Phys. Prototyp. 5 (2010) 75 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.