Open Access
Issue
Mechanics & Industry
Volume 16, Number 4, 2015
Article Number 411
Number of page(s) 7
DOI https://doi.org/10.1051/meca/2015021
Published online 19 June 2015
  1. D. Ibrahim, A.R. Marc, Thermal energy storage system and application, Wiley, 2011, pp. 90–99 [Google Scholar]
  2. S. Khare, M. Dell Amico, C. Knight, S. McGarry, Selection of materials for high temperature sensible energy storage, Sol. Energy Mater. Solar Cells 115 (2013) 114–122 [CrossRef] [Google Scholar]
  3. S. Harmeet, R.P. Saini, J.S. Saini, A review on packed bed solar energy storage systems, Renew. Sust. Energ. Rev. 14 (2010) 1059–1069 [CrossRef] [Google Scholar]
  4. B. Fengwu, X. Chao, Performance analysis of a two-stage thermal energy storage system using concrete and steam accumulator, Appl. Thermal Eng. 31 (2011) 2764–2771 [CrossRef] [Google Scholar]
  5. M.M. Elsayed, I.E. Megahed, M.M. El-Refaee, Experimental testing of fluidized bed thermal storage, Solar and Wind Technology 5 (1988) 15–25 [CrossRef] [Google Scholar]
  6. S. Hassan, R.S. Hernandez, K. Vonzabern, J. Pierce, K. Kantesaria, M. Rubin, Thermal Inertia of sand at different Levels of Water Saturation, 44th Lunar and Planetary science Conference, 2013 [Google Scholar]
  7. M. Haider, K. Schwaiger, F. Holzlethner, R. Eisl, A comparaison between passive regenerative and active fluidized bed thermal energy storage systems, J. Phys.: Conf. Ser. 395 (2012) 8 [CrossRef] [Google Scholar]
  8. S. Warerkar, S. Schmitz, J. Goettsche, B. Hoffschmidt, M. Reiβel, Air-Sand Heat Exchanger for High-Temperature Storage, J. Solar Energy Eng. 133 (2011) 021010-1–021010-7 [CrossRef] [Google Scholar]
  9. J. Sheldon, D. Sadowski, M. Golob, J. McKoy, J. Stephens, B. Lines, Development of a novel thermal energy storage system using sand as the medium, The Solar Conference Proceedings, 2010 [Google Scholar]
  10. B. Nordell, G. Hellstrom, High temperature solar heated seasonal storage system for low temperature heating of buildings, Solar Energy 69 (2000) 511–523 [CrossRef] [Google Scholar]
  11. M.B. Lalit, S. Santosh, S.N. Naik, Solar dryer with thermal energy storage systems for drying agricultural food products: A review, Renew. Sust. Energ. Rev. 14 (2010) 2298–2314 [CrossRef] [Google Scholar]
  12. S.H. Hasnain, Review on sustainable thermal energy storage technologies, part i: heat storage materials and techniques, Energy Convers. Mgmt 39 (1998) 1127–1138 [CrossRef] [Google Scholar]
  13. D. Fernandes, F. Pitié, G. Cáceres, J. Baeyens, Thermal energy storage: How previous findings determine current research priorities, Energy 39 (2012) 246–257 [CrossRef] [Google Scholar]
  14. A.I. Fernandez, M. Martınez, M. Segarra, I. Martorell, L.F. Cabeza, Selection of materials with potential in sensible thermal energy storage, Solar Energy Mater. Solar Cells 94 (2010) 1723–1729 [CrossRef] [Google Scholar]
  15. M.E. Navarro, M. Martinez, A. Gil, A.I. Fernandez, L.F. Cabeza, R. Olives, X. Py, Selection and characterization of recycled materials for sensible thermal energy storage, Sol. Energy Mater. Sol Cells 107 (2012) 131–135 [CrossRef] [Google Scholar]
  16. A. Gil, M. Medrano, I. Martorell, A. Lazaro, P. Dolado, B. Zalba, L.F. Cabeza, State of the art on high temperature thermal energy storage for power generation, Part 1: Concepts, materials and modellization, Renew. Sust. Energ. Rev. 14 (2010) 31–55 [CrossRef] [Google Scholar]
  17. M.M. Alkilani, K. Sopian, M.A. Alghoul, M. Sohif, M.H. Ruslan, Review of solar air collectors with thermal storage units, Renew. Sust. Energ. Rev. 15 (2011) 1476–1490 [CrossRef] [Google Scholar]
  18. J.L. Tanguier, R. Benelmir, M. El Ganaoui, Fluidization of wood particles in a mixed bed: faisability and process control, Mechanics & Industry 13 (2012) 69–76 [CrossRef] [EDP Sciences] [Google Scholar]
  19. S. Messai, M. El Ganaoui, J. Sghaier, L. Chrusciel, S. Gabsi, Comparison of 1D and 2D models predicting a packed bed drying, Int. J. Simul. Multidiscipl. Design Optim. 14 (2014) [Google Scholar]
  20. S. Messai, J. Sghaier, L. Chrusciel, M. El Ganaoui, S. Gabsi, Low-Pressure Superheated Steam Drying–Vacuum Drying of a Porous medium and the Inversion Temperature, Drying echnology 33 (2015) 103–110 and 111–119 [CrossRef] [Google Scholar]
  21. A.A. Arjun, R.W. Kishor, O.R. Rameshwar, Solar Thermal Storage System, Int. J. Theoret. Appl. Res. Mech. Eng. 1 (2012) 2319–3182 [Google Scholar]
  22. Y. Tian, C.Y. Zhao, A review of solar collectors and thermal energy storage in solar thermal applications, Appl. Energy 104 (2013) 538–553 [CrossRef] [Google Scholar]
  23. P. Lia, J.V. Lewa, C. Chana, W. Karakia, J. Stephens, J.E. O’Brien, Similarity and generalized analysis of efficiencies of thermal energy storage systems, Renew. Energ. 39 (2012) 388–402 [CrossRef] [Google Scholar]
  24. N. Mahfoudi, A. Moummi, M. El. Ganaoui, Sand as a Heat Storage medium for a Solar Application: Simulation Results, Appl. Mech. Mater. 621 (2014) 214–220 [CrossRef] [Google Scholar]
  25. N. Mahfoudi, A. Moummi, M. El. Ganaoui, F. Mnasri, K.M. Aboudou, Simulation du comportement thermique d’un milieu poreux destiné au stockage sensible : Application à l’énergie solaire, CIFEM, 5–7 Mai 2014, Comores [Google Scholar]
  26. M. Fashby, D. Jones, Matériaux, Dunod, 1991, pp. 143–157 [Google Scholar]
  27. A. Bouaziz, R. Hamzaoui, S. Rezigue, A. Bennabi, Valorisation du sable de dune dans les formulations des mortiers et des bétons, 31èmes Rencontres de l’AUGC, E.N.S. Cachan, 29 au 31 mai, 2013 [Google Scholar]
  28. M. Ashmore, H.T. Siemon, A comparison of experimental thermal stratification parameters for an oil/pebble-bed thermal energy storage (TES) system during charging, Appl. Energy 88 (2011) 4766–4778 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.