Free Access
Issue
Mechanics & Industry
Volume 17, Number 6, 2016
Article Number 614
Number of page(s) 19
DOI https://doi.org/10.1051/meca/2016032
Published online 30 September 2016
  1. G. Lubineau, P. Ladevèze, Construction of a micromechanics-based intralaminar mesomodel, and illustrations in ABAQUS/Standard, Comput. Mater. Sci. 43 (2008) 137–145 [CrossRef]
  2. F. Hélénon, M.R. Wisnom, S.R. Hallett, R.S. Trask, Numerical investigation into failure of laminated composite T-piece specimens under tensile loading, Composites: Part A 43 (2012) 1017–1027 [CrossRef]
  3. J. Reinoso, A. Blázquez, A. Estefani, F. París, J. Cañas, E. Arévalo, F. Cruz, Experimental and three-dimensional global-local finite element analysis of a composite component including degradation process at the interfaces, Composites: Part B 43 (2012) 1929–1942 [CrossRef]
  4. A. Thionnet, J. Renard, Modelling unilateral damage effect in strongly anisotropic materials by the introduction of the loading mode in damage mechanics, Int. J. Fatigue 24 (2002) 147–154 [CrossRef]
  5. J.P. Berro Ramirez, D. Halm, J.C. Grandidier, Simulation de la rupture de structures composites par une approche à directions fixes de l’endommagement. Proceedings of Journées Nationales des Composites, JNC16, 2012
  6. F. Laurin, N. Carrère, J.-F. Maire, A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models, Composites: Part A 38 (2007) 198–209 [CrossRef]
  7. P. Ladevèze, O. Allix, L. Gornet, D. Lévêque, L. Perret, A computational damage mechanics approach for laminates: identification and comparison with experimental results, Elsevier Science, 1998
  8. B. Gentilleau, Modélisation et validation expérimentale du comportement thermomécanique de multicouches polymère-composite bobiné-application au stockage d’hydrogène hyperbare, Ph.D. thesis, ENSMA, 2012
  9. Certification Specification of Very Light Aeroplane (CS VLA), European Aviation Safety Agency (EASA)
  10. Acceptable Means of Compliance 572, 613 and 619, CS VLA
  11. N. Revest, Comportement en fatigue de pièces épaisses en matériaux composites, Thèse, École Nationale Supérieure des Mines de Paris, 2011
  12. C. Bois, M. Colt, H. Wargnier, J.C. Wahl, Étude du transfert de charge dans les assemblages composites hybrides boulonnés et collés, Université de Bordeaux, Politechnica University of Bucharest, Comptes Rendus des JNC, 17
  13. F.J. Guild, D. Walton, R.D. Admas, D. Short, The application of acoustic emission to fibre-reinforced composite materials, Composites, July 1976, 173–179
  14. M. Giordano, A. Calabro, C. Esposito, A. D’Amore, L. Nicolais, An acoustic emission characterization of the failure modes in polymer-composite materials, Compos. Sci. Technol. 58 (1998) 1923–1928 [CrossRef]
  15. J.J. Scholey, P.D. Wilcox, M.R. Wisnom, M.I. Friswell, Quantitative experimental measurements of matrix cracking and delamination using acoustic emission, Composites Part A 41 (2010) 612–23 [CrossRef]
  16. A. Caladro, C. Esposito, A. Lizza, A. D’Amore, L. Nicolaist, An acoustic emission characterization of the failure modes in polymer – composite materials, Compos. Sci. Technol. 58 (1997) 1923–1928
  17. T. Uenoya, Acoustic emission and the fiber/matrix interface failure progress and strength in glass fiber/epoxy laminates, 10th ICCM, 1995, pp. 581–588
  18. N. Godin, S. Huguet, R. Gaertner, Influence of hydrolytic ageing on the acoustic emission signatures of damage mechanisms occurring during tensile tests on a polyester composite: Application of a Kohonen’s map, Compos. Struct. 72 (2006) 79–85 [CrossRef]
  19. S. Momon, N. Godin, P. Reynaud, M. R’Mili, G. Fantozzi, Unsupervised and supervised classification of AE data collected during fatigue test on CMC at high temperature, Composites Part A 43 (2012) 254–260 [CrossRef]
  20. M. Bertin, Fatigue thermomécanique de multicouches polymère/composite, Ph.D. thesis, ENSMA, 2011

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.