Open Access
Mechanics & Industry
Volume 17, Number 7, 2016
STANKIN: Advanced scientific studies and research in Mechanical Engineering
Article Number 707
Number of page(s) 11
Published online 23 December 2016
  1. I. Smurov, M. Doubenskaia, Temperature monitoring by optical methods in laser processing, Laser-Assisted Fabrication of Materials (2013) 375–422
  2. T. Craeghs, S. Clijster, E. Yasa, F. Bechmann, S. Berumen, J.P. Kruth, Determination of geometrical factors in layerwise laser melting using optical process monitoring, Opt. Lasers En. 49 (2011) 1440–1446 [CrossRef]
  3. U. Thombansen, A. Gatej, M. Pereira, Tracking the course of the manufacturing process in selective laser melting, Proc. SPIE, Int. Soc. Opt. Photonics (2014) 8963
  4. Y. Chivel, I. Smurov, On-line temperature monitoring in selective laser sintering/melting, Phys. Procedia 5 (2010) 515–521 [CrossRef]
  5. H. Krauss, C.M.F. Eschey Zaeh, Thermography for monitoring the selective laser melting process, Proc. of the 23rd Annual International Solid Freeform Fabrication Symposium, The University of Texas at Austin, Austin, TX (2012) 999–1014
  6. M. Doubenskaia, S. Grigoriev, I. Zhirnov, I. Smurov, Parametric analysis of SLM using comprehensive optical monitoring, Rapid Prototyping J. 22 (2016) 40–50 [CrossRef]
  7. S. Elhadj, M.J. Matthews, S.T. Yang, Combined infrared thermal imaging and laser heating for the study of materials thermophysical and processing properties at high temperatures, Crit. Rev. Solid State Mater. Sci. 39 (2014) 175–196 [CrossRef]
  8. M.J. Matthews, S. Rubenchik, G. Guss, Characterization of melt-flow dynamics in selective laser melting (SLM) processes, CLEO: Applications and Technology (pp. ATh3A-Optical Society of America (2015) 1–2
  9. I.V. Zhirnov, I. Smurov, M.A. Yu., Doubenskaia Optical monitoring of selective laser melting: influence of scanning speed and laser power on the melt pool geometry on the surface of INOX 316L powder layer (In Russian), Vestnik MGTU Stankin 3 (2015) 52–56
  10. J.P. Kruth, P. Mercelis, J. Van Vaerenbergh, T. Craeghs, Feedback control of selective laser melting, Proceedings of the 3rd international conference on advanced research in virtual and rapid prototyping (2007) 521–527
  11. A. Okunkova, M. Volosova, P. Peretyagin, I. Zhirnov, P. Podrabinnik, S.V. Fedorov, A. Gusarov, Study of laser beam modulation influence on structure of materials produced by additive manufacturing, Adv. Mater. Lett. 7 (2016) 111–115 [CrossRef]
  12. C.Y. Ho, T.K. Chu, Electrical resistivity and thermal conductivity of nine selected AISI stainless steels, Cindas report 45, CINDAS/TEPIAC Publication (1977) 51
  13. R.M. German, K.F. Hens, J.L. Johnson, Powder metallurgy processing of thermal management materials for microelectronic applications, Int. J. Powder Metall. 30 (1994) 205–215
  14. I. Yadroitsev, I. Yadroitsava, P. Bertrand, I. Smurov, Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks, Rapid Prototyping Journal 18 (2012) 201–208 [CrossRef]
  15. A.V. Gusarov, I. Smurov, Radiation transfer in metallic powder beds used in laser processing, J. Quantitative Spectroscopy Radiative Transf. 111 (2010) 2517–2527 [CrossRef]
  16. I.V. Zhirnov, P.A. Podrabinnik, M. Tokbergenov, A.A. Okunkova, I.Y. Smurov, Optical Monitoring and Diagnostics of SLM Processing for Single Track Formation from Co-Cr Alloy, Materials Science Forum 834 (2015) 51–60 [CrossRef]
  17. S.N. Grigoriev, T.V. Tarasova, G.O. Gvozdeva, S. Nowotny, Structure formation of hypereutectic Al-Si-alloys produced by laser surface treatment, Strojniški vestnik-J. Mech. Eng. 60 (2014) 389–394 [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.