EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 18 / No 1 (2017) Mechanics & Industry, 18 1 (2017) 115 References
Open Access
Issue
Mechanics & Industry
Volume 18, Number 1, 2017
Article Number 115
Number of page(s) 7
DOI https://doi.org/10.1051/meca/2016036
Published online 16 January 2017
  1. S. Kavinprasad, S. Shankar, M. Karthic, Experimental and CFD Investigations of Mechanical Seals under Dry/Compressed Air/Liquid Lubricating Conditions, Proc. Eng. 64 (2013) 419–425 [CrossRef] [Google Scholar]
  2. S. Kavinprasad, S. Shankar, M. Karthic, Experimental and CFD investigations of carbon/SS316 mechanical face seals under different lubricating conditions, Ind. Lubr. Tribol. 67 (2015) 124–132 [CrossRef] [Google Scholar]
  3. S. Shankar, P. Krishna kumar, G. Praveenkumar, Experimental study on frictional characteristics of tungsten carbide versus carbon as mechanical seals under dry and eco-friendly lubrications, Int. J. Refract. Metals Hard Mater. (2015) [Google Scholar]
  4. S. Shankar, G. Praveenkumar, P.K. Kumar, Frictional study of alumina, 316 stainless steel, phosphor bronze versus carbon as mechanical seals under dry sliding conformal contact, Proc. Institut. Mech. Eng., Part J: J. Eng. Tribol. (2015) 1350650115577116 [Google Scholar]
  5. M. Sebastiani, et al., Wear mechanisms and in-service surface modifications of a Stellite 6B Co–Cr alloy, Wear 290 (2012) 10–17 [CrossRef] [Google Scholar]
  6. B. Ben Difallah, et al., Microstructure, friction and wear analysis of thermoplastic based composites with solid lubricant, Mech. Ind. 13 (2012) 337–346 [CrossRef] [EDP Sciences] [Google Scholar]
  7. E. Ciulli, Tribology research trends in Italy, Proc. Instit. Mech. Eng. Part J: J. Eng. Tribol. 223 (2009) 1091–1113 [CrossRef] [Google Scholar]
  8. A. Kovalchenko, et al., Development of ultrananocrystalline diamond (UNCD) coatings for multipurpose mechanical pump seals, Wear 270 (2011) 325–331 [CrossRef] [Google Scholar]
  9. I. Etsion, G. Halperin, A laser surface textured hydrostatic mechanical seal, Tribol. Trans. 45 (2002) 430–434 [Google Scholar]
  10. T. Hu, Y. Zhang, L. Hu, Tribological investigation of MoS2 coatings deposited on the laser textured surface, Wear 278 (2012) 77–82 [CrossRef] [Google Scholar]
  11. A. Kovalchenko, et al., The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact, Tribol. Int. 38 (2005) 219–225 [CrossRef] [Google Scholar]
  12. N. Tala-Ighil, M. Fillon, Surface texturing effect comparative analysis in the hydrodynamic journal bearings, Mech. Ind. 16 (2015) 302 [CrossRef] [EDP Sciences] [Google Scholar]
  13. A. Charitopoulos, et al., Thermohydrodynamic analysis of a textured sector-pad thrust bearing: effects on mechanical deformations, Mech. Ind. 15 (2014) 403–411 [CrossRef] [EDP Sciences] [Google Scholar]
  14. F. Mubarok, et al., Enhanced sealing performance with CVD nanocrystalline diamond films in self-mated mechanical seals, Diamond and Relat. Mater. 17 (2008) 1132–1136 [CrossRef] [Google Scholar]
  15. A. Sumant, et al., Ultrananocrystalline diamond film as a wear-resistant and protective coating for mechanical seal application, Tribol. Trans. 48 (2005) 24–31 [CrossRef] [Google Scholar]
  16. K. Yamamoto, K. Matsukado, Effect of hydrogenated DLC coating hardness on the tribological properties under water lubrication, Tribol. Int. 39 (2006) 1609–1614 [CrossRef] [Google Scholar]
  17. A. Semenov, Tribological properties and vacuum ion-plasma methods of application of diamond and diamond-like coatings, J. Frict. Wear 30 (2009) 62–75 [CrossRef] [Google Scholar]
  18. A. Grill, Tribology of diamondlike carbon and related materials: an updated review, Surf. Coat. Technol. 94-95 (1997) 507–513 [Google Scholar]
  19. J. Mo, M. Zhu, Tribological investigation of WC/C coating under dry sliding conditions, Wear 271 (2011) 1998–2005 [CrossRef] [Google Scholar]
  20. E. Vera, et al., A study of the wear performance of TiN, CrN and WC/C coatings on different steel substrates, Wear 271 (2011) 2116–2124 [CrossRef] [Google Scholar]
  21. X. Yu, S. He, R. Cai, Frictional characteristics of mechanical seals with a laser-textured seal face, J. Mater. Proc. Technol. 129 (2002) 463–466 [CrossRef] [Google Scholar]
  22. S.K. Choudhary, R. Jadoun, International journal of engineering sciences & research technology current research issue, trend and applications of powder mixed dielectric electric discharge machining (PM-EDM): A Review. [Google Scholar]
  23. G. Jones, On the tribological behaviour of mechanical seal face materials in dry line contact: Part I. Mechanical carbon, Wear 256 (2004) 415–432 [CrossRef] [Google Scholar]
  24. O. Wänstrand, M. Larsson, P. Hedenqvist, Mechanical and tribological evaluation of PVD WC/C coatings, Surf. Coat. Technol. 111 (1999) 247–254 [CrossRef] [Google Scholar]
  25. H. Engqvist, et al., Tribofilm formation on cemented carbides in dry sliding conformal contact, Wear 239 (2000) 219–228 [CrossRef] [Google Scholar]
  26. M. Chowdhury, et al., The effect of sliding speed and normal load on friction and wear property of aluminum, Int. J. Mech. Mechatron. Eng. 11 (2011) 53–57 [Google Scholar]
  27. Y. Xiao, et al., The tribological performance of TiN, WC/C and DLC coatings measured by the four-ball test, Ceramics Int. 40 (2014) 6919–6925 [CrossRef] [Google Scholar]
  28. K.C. Ludema, Friction, wear, lubrication: a textbook in tribology, CRC press, 1996 [Google Scholar]
  29. B. Bhushan, Modern Tribology Handbook, Two Volume Set, CRC Press, 2010 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.