Open Access
Issue |
Mechanics & Industry
Volume 18, Number 1, 2017
|
|
---|---|---|
Article Number | 109 | |
Number of page(s) | 13 | |
DOI | https://doi.org/10.1051/meca/2016033 | |
Published online | 26 October 2016 |
- H. Hassan, N. Regnier, C. Lebot, C. Pujos, G. Defaye, Effect of cooling system on the polymer temperature and solidification during injection molding, Appl. Thermal Eng. 29 (2009) 1786–1791 [CrossRef] [Google Scholar]
- A. Agazzi, V. Sobotka, R. LeGoff, Y. Jarny, Optimal cooling design in injection moulding process – A new approach based on morphological surfaces, Appl. Thermal Eng. 52 (2013) 170–178 [CrossRef] [Google Scholar]
- Z. Shayfull, S. Sharif, A. Mohd Zain, R. Mohd Saad, M.A. Fairuz, Milled groove square shape conformal cooling channels in injection molding process, Mater. Manuf. Process. 28 (2013) 884–891 [Google Scholar]
- Y. Wang, Y. Kai-Min, C.L. Wang, Y. Zhang, Automatic design of conformal cooling circuits for rapid tooling, Comput. Aided Design 43 (2011) 1001–1010 [CrossRef] [Google Scholar]
- X.P. Dang, H.S. Park, Design of u-shape milled groove conformal cooling channels for plastic injection mold, Int. J. Precis. Eng. Manuf. 12 (2011) 73–84 [CrossRef] [Google Scholar]
- J. Liu, Z. Lu, Y. Shi, W. Xu, J. Zhang, Investigation into manufacturing injection mold via indirect selective laser sintering, Int. J. Adv. Manuf. Technol. 48 (2010) 155–163 [CrossRef] [Google Scholar]
- D.-G. Ahn, Applications of laser assisted metal rapid tooling process to manufacture of molding and forming tools – state of the art, Int. J. Precis. Eng. Manuf. 12 (2011) 925–938 [CrossRef] [Google Scholar]
- R.Y. Chang, B.D. Tsaur, Experimental and theoretical studies of shrinkage, warpage and sink marks of crystalline polymer injection molded parts, Polymer Eng. Sci. 35 (1995) 1222–1230 [CrossRef] [Google Scholar]
- A. Daniele, R.-A. Jeffrey, Review of Factors that Affect Shrinkage of Molded Part in Injection Molding, Mater. Manuf. Process. 29 (2014) 662–682 [CrossRef] [Google Scholar]
- H. Hassan, N. Regnier, C. Pujos, E. Arquis, G. Defaye, Modeling the effect of cooling system on the shrinkage and temperature of the polymer by injection molding, Appl. Thermal Eng. 30 (2010) 1547–1557 [CrossRef] [Google Scholar]
- G. Wang, G. Zhao, Y. Guan, Thermal response of an electric heating rapid cycle molding mold and its effect on surface appearance and tensile strength of the molded part, J. Appl. Polymer Sci. 128 (2013) 1339–1352 [Google Scholar]
- G. Wang, G. Zhao, X. Wang, Experimental research on the effects of cavity surface temperature on surface appearance properties of the molded part in rapid heat cycle molding process, Int. J. Adv. Manuf. Technol. 68 (2013) 1293–1310 [CrossRef] [Google Scholar]
- G. Lucchetta, M. Fiorotto, P.F. Bariani, Influence of rapid mold temperature variation on surface topography replication and appearance of injection-molded parts, CIRP Annals – Manuf. Technol. 61 (2012) 539–542 [CrossRef] [Google Scholar]
- G. Lucchetta, M. Fiorotto, Influence of Rapid Mould Temperature Variation on the Appearance of Injection-Moulded Parts, J. Mech. Eng. 59 (2013) 683–68 [CrossRef] [Google Scholar]
- X.-P. Li, G.-Q. Zhao, Y.-J. Guan, M.-X. Ma, Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm, Mater. Design 30 (2009) 4317–4323 [CrossRef] [Google Scholar]
- G. Zhao, G. Wang, Y. Guan, H. Li, Research and application of a new rapid heat cycle molding with electric heating and coolant cooling to improve the surface quality of large LCD TV panels, Polymer Adv. Technol. 22 (2011) 476–487 [CrossRef] [Google Scholar]
- X.-P. Li, N.-N. Gong, Y.-J. Guan, G.-M. Cheng, Thermal and stress analysis of rapid electric heating injection mold for a large LCD TV panel, Appl. Thermal Eng. 31 (2011) 3989–3995 [CrossRef] [Google Scholar]
- P.-C. Chang, S.-J. Hwang, Experimental investigation of infrared rapid surface heating for injection molding, J. Appl. Polymer Sci. 102 (2006) 3704–3713 [CrossRef] [Google Scholar]
- M.-C. Jeng, S.-C. Chen, P. S. Minh, J.-A. Chang, C.-S. Chung, Rapid mold temperature control in injection molding by using steam heating, Int. Commun. Heat Mass Transfer 37 (2010) 1295–1304 [Google Scholar]
- G. Wang, G. Zhao, H. Li, Y. Guan, Research on optimization design of the heating/cooling channels for rapid heat cycle molding based on response surface methodology and constrained particle swarm optimization, Expert Syst. Appli. 38 (2011) 6705–6719 [CrossRef] [Google Scholar]
- M. Wang, J. Dong, W. Wang, J. Zhou, Z. Dai, X. Zhuang, X. Yao, Optimal design of medium channels for water-assisted rapid thermal cycle mold using multi-objective evolutionary algorithm and multi-attribute decision-making method, Int. J. Adv. Manuf. Technol. 68 (2013) 2407–2417 [CrossRef] [Google Scholar]
- M. Hammami, F. Kria, M. Baccar, Numerical study of thermal control system for rapid heat cycle injection molding process, J. Process Mech. Eng. Part E. 229 (2015) 315–326 [Google Scholar]
- G. Wang, G. Zhao, X. Wang, Effects of cavity surface temperature on mechanical properties of specimens with and without a weld line in rapid heat cycle molding, Mater. Design 46 (2013) 457–47 [CrossRef] [Google Scholar]
- C.-L. Xiao, H.-X. Huang, Development of a rapid thermal cycling molding with electric heating and water impingement cooling for injection molding applications, Appl. Thermal Eng. 73 (2014) 712–722 [CrossRef] [Google Scholar]
- G. Wang, G. Zhao, X. Wang, Heating/cooling channels design for an automotive interior part and its evaluation in rapid heat cycle molding, Mater. Design 9 (2014) 310–322 [CrossRef] [Google Scholar]
- Moldflow plastic insight release 5.0, 2002 [Google Scholar]
- Autodesk simulation Moldflow adviser, 2014 [Google Scholar]
- Technical engineering A 3 381 – 8 [Google Scholar]
- M.W. Rohsenow, J.P. Hartnett, Handbook of heat transfer, McGraw-Hill, New York, 1973 [Google Scholar]
- C.-A. Sleicher, M.-W. Rousse, A convenient correlation for heat transfer to constant and variable property fluids in turbulent pipe flow, Int. J. Heat Mass Transfer 18 (1975) 677–683 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.