EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 18 / No 2 (2017) Mechanics & Industry, 18 2 (2017) 225 References
Open Access
Issue
Mechanics & Industry
Volume 18, Number 2, 2017
Article Number 225
Number of page(s) 10
DOI https://doi.org/10.1051/meca/2016057
Published online 16 March 2017
  1. E.A. Sewall, D.K. Tafti, A.B. Graham, K.A. Thole, Experimental validation of large eddy simulations of flow and heat transfer in a stationary ribbed duct, Int. J. Heat Fluid Flow 27 (2006) 243–258 [CrossRef] [Google Scholar]
  2. K. Bilen, M. Cetin, H. Gul, T. Balta, The investigation of groove geometry effect on heat transfer for internally grooved tubes, Appl. Thermal Eng. 29 (2009) 753–76 [CrossRef] [Google Scholar]
  3. T. Chompookham, C. Thianpong, S. Kwankaomeng, P. Promvonge, Heat transfer augmentation in a wedge-ribbed channel using winglet vortex generators, Int. Commu. Heat Mass Transfer 37 (2010) 163–169 [Google Scholar]
  4. S. Sripattanapipat, P. Promvonge, Numerical analysis of laminar heat transfer in a channel with diamond-shaped baffles, Int. Commu. Heat Mass Transfer 36 (2009) 32–38 [CrossRef] [Google Scholar]
  5. L. Wang, B. Sunden, Experimental investigation of local heat transfer in a square duct with various-shaped ribs, Heat Mass Transfer 43 (2007) 759–766 [CrossRef] [Google Scholar]
  6. J.C. Han, Y.M. Zhang, C.P. Lee, Augmented heat transfer in square channels with parallel, crossed and V-shaped angled ribs, ASME J. Heat Transfer 113 (1991) 590–596 [CrossRef] [Google Scholar]
  7. J.C. Han, Y.M. Zhang, C.P. Lee, Influence of surface heat flux ratio on heat transfer augmentation in square channels with parallel, crossed, and V-shaped angled ribs, SME J. Turbomachinery 114 (1992) 872–880 [CrossRef] [Google Scholar]
  8. G. Xie, J. Liu, P.M. Ligrani, B. Sunden, Flow structure and heat transfer in a square passage with offset mid-truncated ribs, Int. J. Heat Mass Transfer 71 (2014) 44–56 [CrossRef] [Google Scholar]
  9. B. Facchini, L. Innocenti, M. Surace, Design criteria for ribbed channels: Experimental investigation and theoretical analysis, Int. J. Heat Mass Transfer 49 (2006) 3130–3141 [CrossRef] [Google Scholar]
  10. H. Iacovides, G. Kelemenis, M. Raisee, Flow and heat transfer in straight cooling passages with inclined ribs on opposite walls: an experimental and computational study, Experimental Thermal and Fluid Science 27 (2003) 283–294 [CrossRef] [Google Scholar]
  11. Ya.I. Smulsky, V.I. Terekhov, N.I. Yarygina, Heat Transfer in turbulent separated flow behind a rib on the surface of square channel at different orientation angles relative to flow direction, Int. J. Heat Mass Transfer 55 (2012) 726–733 [CrossRef] [Google Scholar]
  12. C. Mucignat, A. Armellini, L. Casarsa, Flow field analysis inside a gas turbine trailing edge cooling channel under static and rotating conditions: Effect of ribs, Int. J. Heat Fluid Flow 42 (2013) 236–250 [CrossRef] [Google Scholar]
  13. G. Tanda, Effect of rib spacing on heat transfer and friction in a rectangular channel with 45° angled rib turbulators on one/two walls, Int. J. Heat Mass Transfer 54 (2011) 1081–1090 [CrossRef] [Google Scholar]
  14. M.A. Moon, M.J. Park, K.Y. Kim, Evaluation of heat transfer performances of various rib shapes, Int. J. Heat Mass Transfer 71 (2014) 275–284 [CrossRef] [Google Scholar]
  15. J.H. Wagner, B.V. Johnson, B.A. Graziani, F.C. Yeh, Heat transfer in rotating serpentine passages with trips normal to the flow, ASME J. Turbomachine 114 (1992) 847–857 [CrossRef] [Google Scholar]
  16. B.V. Johnson, J.H. Wagner, G.D. Steuber, F.C. Yeh, Heat transfer in rotating serpentine passages with trip skewed to the flow, ASME Turbomachine 116 (1994) 113–123 [CrossRef] [Google Scholar]
  17. F.P. Incropera, D.P. DeWitt, Fundamentals of Heat and Mass Transfer, fifth edition 2002, John Wiley & Sons, New York [Google Scholar]
  18. J.S. Lee, J. Ahn, Large eddy simulation of flow and heat transfer in a channel with a detached rib array, Int. J. Heat Mass Transfer 53 (2010) 445–452 [CrossRef] [Google Scholar]
  19. D.K. Tafti, Evaluating the role of subgrid stress modeling in a ribbed duct for the internal cooling of turbine blades, Int. J. Heat Fluid Flow 26 (2005) 92–104 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.