Open Access
| Issue |
Mechanics & Industry
Volume 18, Number 5, 2017
|
|
|---|---|---|
| Article Number | 512 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/meca/2016079 | |
| Published online | 05 December 2017 | |
- S. Kondapalli, C. Srinivasa, D. Rao, A review on welding of AISI 304L austenitic stainless steel, J. Manuf. Sci. Prod. 14 (2014) 1–11 [Google Scholar]
- B. Shanmugarajan, P. Sathiya, G. Buvanashekara, Mechanical and metallurgical properties of autogenous laser welded P92 material, J. Manuf. Process. 24 (2016) 11–18 [CrossRef] [Google Scholar]
- M. Nascimento, R. Souza, W. Pigatin, H. Voorwald, Effects of surface treatments on the fatigue strength of AISI 4340 aeronautical steel, Int. J. Fatigue 23 (2001) 607–618 [CrossRef] [Google Scholar]
- A. Ventrella, J. Berretta, W. Rossi, Pulsed Nd:YAG laser seam welding of AISI 316L stainless steel thin foils, J. Mater. Process. Tech. 210 (2010) 1838–1843 [CrossRef] [Google Scholar]
- S. Katayama, Laser welding of aluminum alloys and dissimilar metals, Weld Int. 18 (2004) 618–625 [CrossRef] [Google Scholar]
- J. Yang, Y. Li, H. Zhang, Microstructure and mechanical properties of pulsed laser welded Al/steel dissimilar joint, Trans. Nonferrous Met. Soc. China 26 (2016) 994–1002 [CrossRef] [Google Scholar]
- W. Duley, Laser welding, Wiley-Interscience publication, New Jersey, 1998 [Google Scholar]
- M.J. Torkamany, J. Sabbaghzadeh, M.J. Hamedi, Effect of laser welding mode on the microstructure and mechanical performance of dissimilar laser spot welds between low carbon and austenitic stainless steels, Mater. Des. 34 (2012) 666–672 [CrossRef] [Google Scholar]
- M.M.A. Khan, L. Romoli, M. Fiaschi, G. Dini, F. Sarri, Laser beam welding of dissimilar stainless steels in a fillet joint configuration, J. Mater. Process. Tech. 212 (2012) 856–867 [Google Scholar]
- A.P. Tadamalle, Y.P. Reddy, E. Ramjee, Influence of laser welding process parameters on weld pool geometry and duty cycle, Adv. Prod. Eng. Manag. 8 (2013) 52–60 [Google Scholar]
- S. Karami, H. Jafarian, A. Eivani, S. Kheirandish, Engineering tensile properties by controlling welding parameters and microstructure in a mild steel processed by friction stir welding, Mater. Sci. Eng.: A 670 (2016) 68–74 [CrossRef] [Google Scholar]
- S. Ugender, A. Kumar, A. Reddy, Experimental investigation of tool geometry on mechanical properties of friction stir welding of AA 2014 aluminium alloy, Procedia Mater. Sci. 5 (2014) 824–831 [CrossRef] [Google Scholar]
- F. MalekGhaini, M.J. Hamedi, M.J. Torkamany, J. Sabbaghzadeh, Weld metal microstructural characteristics in pulsed Nd:YAG laser welding, Scr. Mater. 56 (2007) 955–958 [CrossRef] [Google Scholar]
- S.A.A. Akbari Mousavi, A.R. Sufizadeh, Metallurgical investigations of pulsed Nd:YAG laser welding of AISI 321 and AISI 630 stainless steels, Mater. Des. 30 (2009) 3150–3157 [CrossRef] [Google Scholar]
- A. Yonezu, H. Akimoto, S. Fujisawa, X. Chen, Spherical indentation method for measuring local mechanical properties of welded stainless steel at high temperature, Mater. Des. 52 (2013) 812–820 [CrossRef] [Google Scholar]
- C. Lipoid, J. Kotecki, Welding metallurgy and weldability of stainless steels, John Wiley and Sons, New York, 2005 [Google Scholar]
- S. Kumar, N. Murugan, K.K. Ramachandran, Influence of tool material on mechanical and microstructural properties of friction stir welded 316L austenitic stainless steel butt joints, Int. J. Refract. Met. Hard Mater. 58 (2016) 196–205 [Google Scholar]
- A. Hasc, E. Unal, Fatigue behavior of AISI 304 steel to AISI 4340 Steel welded by friction welding, J. Mater. Sci. 41 (2006) 3233–3239 [CrossRef] [Google Scholar]
- Standard Test Techniques for Tension Testing of Metallic Materials, ASTM E8/E8M-08, West Conshohocken, USA, 2010 [Google Scholar]
- A.R. Sufizadeh, S.A.A. Akbari Mousavi, Microstructures and mechanical properties of dissimilar Nd:YAG laser welding of AISI4340 and AISI316L steels, Int. J. Miner. Met. Mater. (2017), DOI: 10.1007/s12613-017-1435-0 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.