EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 21 / No 1 (2020) Mechanics & Industry, 21 1 (2020) 113 References
Open Access
Issue
Mechanics & Industry
Volume 21, Number 1, 2020
Article Number 113
Number of page(s) 13
DOI https://doi.org/10.1051/meca/2019088
Published online 31 January 2020
  1. A. Önder, M. Robinson, Harmonised method for impact resistance requirements of E-glass fibre/unsaturated polyester resin composite railway car bodies, Thin-Walled Struct. 131, 151–164 (2018) [CrossRef] [Google Scholar]
  2. M.R. Said, S.T. Lau, M.Y. Yaakob, Quasi static axial crushing of kenaf fibre reinforced epoxy composite fabricated by VARTM method, ARPN J. Eng. Appl. Sci. 12, 4804–4808 (2017) [Google Scholar]
  3. A. Esnaola, I. Tena, I. Saenz-Dominguez, J. Aurrekoetxea, I. Gallego, I. Ulacia, Effect of the manufacturing process on the energy absorption capability of GFRP crush structures, Compos. Struct. 187, 316–324 (2018) [Google Scholar]
  4. I. Saenz-Dominguez, I. Tena, A. Esnaola, M. Sarrionandia, J. Torre, J. Aurrekoetxea, Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion, Compos. Part B Eng. 160, 217–224 (2019) [CrossRef] [Google Scholar]
  5. J. Hu, S. Yin, T.X. Yu, J. Xu, Dynamic compressive behavior of woven flax-epoxy-laminated composites, Int. J. Impact Eng. 117, 63–74 (2018) [Google Scholar]
  6. M.J. Ghoushji, R.A. Eshkoor, R. Zulkifli, A.B. Sulong, S. Abdullah, C.H. Azhari, Energy absorption capability of axially compressed woven natural ramie/green epoxy square composite tubes, J. Reinf. Plast. Compos. 36, 1028–1037 (2017) [CrossRef] [Google Scholar]
  7. J.H.S. Almeida, Jr., M.L. Ribeiro, V. Tita, S.C. Amico, Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression, Compos. Struct. 160, 204–210 (2017) [Google Scholar]
  8. G. Sun, S. Li, G. Li, Q. Li, On crashing behaviors of aluminium/CFRP tubes subjected to axial and oblique loading: an experimental study, Compos. Part B Eng. 145, 47–56 (2018) [CrossRef] [Google Scholar]
  9. M.F.M. Alkbir, S.M. Sapuan, A.A. Nuraini, A.M.S. Hamouda, M.R. Ishak, E. Mahdi, On the effects of geometrical shapes in failure modes in natural-conventional fiber reinforced composite tube: a review, Curr. Anal. Chem. 14, 241–248 (2018) [Google Scholar]
  10. C. Reuter, T. Tröster, Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact, Thin-Walled Struct. 117, 1–9 (2017) [CrossRef] [Google Scholar]
  11. S.M. Hosseini, M. Shariati, Experimental analysis of energy absorption capability of thin-walled composite cylindrical shells by quasi-static axial crushing test, Thin-Walled Struct. 125, 259–268 (2018) [CrossRef] [Google Scholar]
  12. M. Kathiresan, K. Manisekar, Low velocity axial collapse behavior of E-glass fiber/epoxy composite conical frusta, Compos. Struct. 166, 1–11 (2017) [Google Scholar]
  13. R. Ansari, J. Torabi, M. Faghih Shojaei, Free vibration analysis of embedded functionally graded carbon nanotube-reinforced composite conical/cylindrical shells and annular plates using a numerical approach, J. Vib. Control 24, 1123–1144 (2018) [Google Scholar]
  14. R.B. Shinde, K.D. Mali, An overview on impact behaviour and energy absorption of collapsible metallic and non-metallic energy absorbers used in automotive applications, IOP Conf. Ser. Mater. Sci. Eng. 346, 12–54 (2018) [Google Scholar]
  15. A.G. Mamalis, Crashworthiness of Composite Thin-Walled Structures, Routledge, Abingdon, 2017. [Google Scholar]
  16. H. Luo, Y. Yan, T. Zhang, Z. He, S. Wang, Progressive failure numerical simulation and experimental verification of carbon-fiber composite corrugated beams under dynamic impact, Polym. Test. 63, 12–24 (2017) [Google Scholar]
  17. S. Mohsenizadeh, R. Alipour, M.S. Rad, A.F. Nejad, Z. Ahmad, Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading, Mater. Des. 88, 258–268 (2015) [Google Scholar]
  18. S. Mohsenizadeh, R. Alipour, Z. Ahmad, A. Alias, Influence of auxetic foam in quasi-static axial crushing, Int. J. Mater. Res. 107, 916–924 (2016) [CrossRef] [Google Scholar]
  19. R. Alipour, A.F. Nejad, S. Izman, The reliability of finite element analysis results of the low impact test in predicting the energy absorption performance of thin-walled structures, J. Mech. Sci. Technol. 29, 2035–2045 (2015) [CrossRef] [Google Scholar]
  20. S. Mohsenizadeh, R. Alipour, A.F. Nejad, M.S. Rad, Z. Ahmad, Experimental investigation on energy absorption of auxetic foam-filled thin-walled square tubes under quasi-static loading, Procedia Manuf. 2, 331–336 (2015) [Google Scholar]
  21. F. Najarian, R. Alipour, M.S. Rad, A.F. Nejad, A. Razavykia, Multi-objective optimization of converting process of auxetic foam using three different statistical methods, Measurement 119, 108–116 (2018) [CrossRef] [Google Scholar]
  22. S. Mohsenizadeh, Z. Ahmad, R. Alipour, R.A. Majid, Y. Prawoto, Quasi tri-axial method for the fabrication of optimized polyurethane auxetic foams, Phys. Status Solidi 256, 1800587 (2019) [CrossRef] [Google Scholar]
  23. P.G. Coelho, J.M. Guedes, J.B. Cardoso, Topology optimization of cellular materials with periodic microstructure under stress constraints, Struct. Multidiscipl. Optim. 59, 633–645 (2019) [Google Scholar]
  24. A. Sohouli, M. Yildiz, A. Suleman, Design optimization of thin-walled composite structures based on material and fiber orientation, Compos. Struct. 176, 1081–1095 (2017) [Google Scholar]
  25. W. Zuo, K. Saitou, Multi-material topology optimization using ordered SIMP interpolation, Struct. Multidiscip. Optim. 55, 477–491 (2017) [CrossRef] [Google Scholar]
  26. S. Izman, A.F. Nejad, R. Alipour, M.N. Tamin, F. Najarian, Topology optimization of an asymmetric elliptical cone subjected to blast loading, Procedia Manuf. 2, 319–324 (2015) [Google Scholar]
  27. Y. Xu, J. Zhu, Z. Wu, Y. Cao, Y. Zhao, W. Zhang, A review on the design of laminated composite structures: constant and variable stiffness design and topology optimization, Adv. Compos. Hybrid Mater. 1, 460–477 (2018) [Google Scholar]
  28. ABAQUS. Reference Manual (2016) [Google Scholar]
  29. A.I. Selmy, M.A. Abd El-baky, D.A. Hegazy, Mechanical properties of inter-ply hybrid composites reinforced with glass and polyamide fibers, J. Thermoplast. Compos. Mater. 32, 267–293 (2019) [CrossRef] [Google Scholar]
  30. S. Peirovi, M. Pourasghar, A.F. Nejad, M.A. Hassan, A study on the different finite element approaches for laser cutting of aluminum alloy sheet, Int. J. Adv. Manuf. Technol. 93, 1399–1413 (2017) [Google Scholar]
  31. J. Gu, P. Chen, Some modifications of Hashin's failure criteria for unidirectional composite materials, Compos. Struct. 182, 143–152 (2017) [Google Scholar]
  32. M.S. Rad, H. Hatami, R. Alipouri, A.F. Nejad, F. Omidinasab, Determination of energy absorption in different cellular auxetic structures, Mech. Ind. 20, 302 (2019) [CrossRef] [Google Scholar]
  33. H. Mozafari, S. Lin, G.C. Tsui, L. Gu, Controllable energy absorption of double sided corrugated tubes under axial crushing, Compos. Part B Eng. 134, 9–17 (2018) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.