Metallic additive manufacturing: state-of-the-art review and prospects
Mechanics & Industry, 13 2 (2012) 89-96
Published online: 2012-05-04
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
3D printable biomaterials for orthopedic implants: Solution for sustainable and circular economy
Dinesh Yadav, Ramesh Kumar Garg, Akash Ahlawat and Deepak ChhabraResources Policy 68 101767 (2020)
https://doi.org/10.1016/j.resourpol.2020.101767
Effect of hot rolling on structure and mechanical properties of Ti-6Al-4V alloy parts produced by direct laser deposition
P. Sokolov, A. Aleshchenko, A. Koshmin, et al.The International Journal of Advanced Manufacturing Technology 107 (3-4) 1595 (2020)
https://doi.org/10.1007/s00170-020-05132-0
Embedding sensors using selective laser melting for self-cognitive metal parts
Im Doo Jung, Min Sik Lee, Jungsub Lee, Hyokyung Sung, Jungho Choe, Hye Jin Son, Jaecheol Yun, Ki-bong Kim, Moobum Kim, Seok Woo Lee, Sangsun Yang, Seung Ki Moon, Kyung Tae Kim and Ji-Hun YuAdditive Manufacturing 33 101151 (2020)
https://doi.org/10.1016/j.addma.2020.101151
Ti6Al4V Parts Produced by Electron Beam Melting: Analysis of Dimensional Accuracy and Surface Roughness
R. Borrelli, S. Franchitti, C. Pirozzi, et al.Journal of Advanced Manufacturing Systems 19 (01) 107 (2020)
https://doi.org/10.1142/S0219686720500067
Design for metal powder bed fusion: The geometry for additive part selection (GAPS) worksheet
Jennifer Bracken, Thomas Pomorski, Clinton Armstrong, et al.Additive Manufacturing 35 101163 (2020)
https://doi.org/10.1016/j.addma.2020.101163
Effect of processing parameters on forming defects during selective laser melting of AlSi10Mg powder
Haihua Wu, Junfeng Li, Zhengying Wei and Pei WeiRapid Prototyping Journal 26 (5) 871 (2020)
https://doi.org/10.1108/RPJ-07-2018-0184
Fatigue behavior and modeling for additive manufactured 304L stainless steel: The effect of surface roughness
Seungjong Lee, Jonathan W. Pegues and Nima ShamsaeiInternational Journal of Fatigue 141 105856 (2020)
https://doi.org/10.1016/j.ijfatigue.2020.105856
New Challenges and Industrial Applications for Corrosion Prevention and Control
Oscar Sotelo-Mazon, John Henao, Astrid Lorena Giraldo-Betancur, Carlos A. Poblano-Salas and Jorge Corona-CastueraAdvances in Chemical and Materials Engineering, New Challenges and Industrial Applications for Corrosion Prevention and Control 41 (2020)
https://doi.org/10.4018/978-1-7998-2775-7.ch003
Precise control of variable-height laser metal deposition using a height memory strategy
Tuo Shi, Jianjun Shi, Zhixin Xia, et al.Journal of Manufacturing Processes 57 222 (2020)
https://doi.org/10.1016/j.jmapro.2020.05.026
Review on Computational Modeling of Process–Microstructure–Property Relationships in Metal Additive Manufacturing
Theofilos Gatsos, Karim A. Elsayed, Yuwei Zhai and Diana A. LadosJOM 72 (1) 403 (2020)
https://doi.org/10.1007/s11837-019-03913-x
Comprehensive assessment of spatter material generated during selective laser melting of stainless steel
Muhannad Ahmed Obeidi, Andre Mussatto, Robert Groarke, et al.Materials Today Communications 25 101294 (2020)
https://doi.org/10.1016/j.mtcomm.2020.101294
Virgin or recycled? Optimal pricing of 3D printing platform and material suppliers in a closed-loop competitive circular supply chain
Luoyi Sun, Yixiao Wang, Guowei Hua, T.C.E. Cheng and Jingxin DongResources, Conservation and Recycling 162 105035 (2020)
https://doi.org/10.1016/j.resconrec.2020.105035
3D Printing in Biomedical Engineering
Anoop Kapoor, Priyanka Chopra, Komal Sehgal, et al.Materials Horizons: From Nature to Nanomaterials, 3D Printing in Biomedical Engineering 317 (2020)
https://doi.org/10.1007/978-981-15-5424-7_15
Hybrid subtractive–additive manufacturing processes for high value-added metal components
Panagiotis Stavropoulos, Harry Bikas, Oliver Avram, Anna Valente and George ChryssolourisThe International Journal of Advanced Manufacturing Technology 111 (3-4) 645 (2020)
https://doi.org/10.1007/s00170-020-06099-8
Selective laser melting of 304L stainless steel: Role of volumetric energy density on the microstructure, texture and mechanical properties
Milad Ghayoor, Kijoon Lee, Yujuan He, et al.Additive Manufacturing 32 101011 (2020)
https://doi.org/10.1016/j.addma.2019.101011
Additive Manufacturing for Sensor Integrated Components
Im Doo Jung, Min Sik Lee, Young Jin Woo, Kyung Tae Kim and Ji-Hun YuJournal of Korean Powder Metallurgy Institute 27 (2) 111 (2020)
https://doi.org/10.4150/KPMI.2020.27.2.111
Additive Manufacturing Applications for Metals and Composites
Ajit BeheraAdvances in Civil and Industrial Engineering, Additive Manufacturing Applications for Metals and Composites 25 (2020)
https://doi.org/10.4018/978-1-7998-4054-1.ch002
A review on weldability of additive manufactured titanium alloys
B.K. Nagesha, V. Dhinakaran, M. Varsha Shree, K.P. Manoj Kumar and T. JagadeeshaMaterials Today: Proceedings 33 2964 (2020)
https://doi.org/10.1016/j.matpr.2020.02.899
Design for Additive Manufacturing: A Systematic Review
Abdullah Alfaify, Mustafa Saleh, Fawaz M. Abdullah and Abdulrahman M. Al-AhmariSustainability 12 (19) 7936 (2020)
https://doi.org/10.3390/su12197936
Selective laser melting of austenitic oxide dispersion strengthened steel: Processing, microstructural evolution and strengthening mechanisms
Milad Ghayoor, Kijoon Lee, Yujuan He, Chih-hung Chang, Brian K. Paul and Somayeh PasebaniMaterials Science and Engineering: A 788 139532 (2020)
https://doi.org/10.1016/j.msea.2020.139532
A review on integration of lightweight gradient lattice structures in additive manufacturing parts
Asliah Seharing, Abdul Hadi Azman and Shahrum AbdullahAdvances in Mechanical Engineering 12 (6) (2020)
https://doi.org/10.1177/1687814020916951
Microstructure and grain growth inhomogeneity in austenitic steel produced by wire-feed electron beam melting: the effect of post-building solid-solution treatment
Elena G. Astafurova, Marina Yu. Panchenko, Valentina A. Moskvina, et al.Journal of Materials Science 55 (22) 9211 (2020)
https://doi.org/10.1007/s10853-020-04424-w
Automated image mapping and quantification of microstructure heterogeneity in additive manufactured Ti6Al4V
Hao Zhao, Alistair Ho, Alec Davis, Alphons Antonysamy and Philip PrangnellMaterials Characterization 147 131 (2019)
https://doi.org/10.1016/j.matchar.2018.10.027
A Comprehensive Review on Bio-Nanomaterials for Medical Implants and Feasibility Studies on Fabrication of Such Implants by Additive Manufacturing Technique
Rajkumar Velu, Theo Calais, Arunkumar Jayakumar and Felix RaspallMaterials 13 (1) 92 (2019)
https://doi.org/10.3390/ma13010092
The Energy Density as a Reliable Parameter for Characterization of Selective Laser Melting of Various Alloys
P.A. LykovMaterials Science Forum 946 972 (2019)
https://doi.org/10.4028/www.scientific.net/MSF.946.972
61 (2019)
https://doi.org/10.1007/978-3-446-46244-1_5
The load of sustainability for Additive Manufacturing processes
Fabio Fruggiero, Alfredo Lambiase, Raffaele Bonito and Marcello FeraProcedia Manufacturing 41 375 (2019)
https://doi.org/10.1016/j.promfg.2019.09.022
Wire arc additive manufacturing of hot work tool steel with CMT process
Y. Ali, P. Henckell, J. Hildebrand, et al.Journal of Materials Processing Technology 269 109 (2019)
https://doi.org/10.1016/j.jmatprotec.2019.01.034
Microstructure features of Ni-based and Ti-based alloys formed by method of wire-feed electron beam additive technology
D A Gurianov, K N Kalashnikov, V Utyaganova, E S Khoroshko and A V ChumaevskiiIOP Conference Series: Materials Science and Engineering 597 (1) 012042 (2019)
https://doi.org/10.1088/1757-899X/597/1/012042
A barrier analysis for distributed recycling of 3D printing waste: Taking the maker movement perspective
Bob Peeters, Nadine Kiratli and Janjaap SemeijnJournal of Cleaner Production 241 118313 (2019)
https://doi.org/10.1016/j.jclepro.2019.118313
Status, comparison, and future of the representations of additive manufacturing data
Yuchu Qin, Qunfen Qi, Paul J. Scott and Xiangqian JiangComputer-Aided Design 111 44 (2019)
https://doi.org/10.1016/j.cad.2019.02.004
Microstructure and mechanical properties of direct metal laser–sintered 15-5PH steel with different solution annealing heat treatments
Ala’aldin Alafaghani, Ala Qattawi, Md Shah Jaman and Muhammad Ali AblatThe International Journal of Advanced Manufacturing Technology 105 (7-8) 3499 (2019)
https://doi.org/10.1007/s00170-019-04404-8
Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser melting
Yuchao Bai, Di Wang, Yongqiang Yang and Hao WangMaterials Science and Engineering: A 760 105 (2019)
https://doi.org/10.1016/j.msea.2019.05.115
Anisotropic Mechanical Behavior of Additive Manufactured AISI 316L Steel
Yong-Deok Im, Kyung-Hoon Kim, Kyung-Hwan Jung, Young-Kook Lee and Kuk-Hyun SongMetallurgical and Materials Transactions A 50 (4) 2014 (2019)
https://doi.org/10.1007/s11661-019-05139-7
Engineering the crack path in lattice cellular materials through bio-inspired micro-structural alterations
Riccardo Manno, Wei Gao and Ivano BenedettiExtreme Mechanics Letters 26 8 (2019)
https://doi.org/10.1016/j.eml.2018.11.002
Machine Perception Based on Eddy Current for Physical Field Reconstruction of Conductivity and Hidden Geometrical Features
Min Li and Kok-Meng LeeIEEE Transactions on Industrial Informatics 15 (10) 5392 (2019)
https://doi.org/10.1109/TII.2019.2910857
Experimental Study of Build Orientation in Direct Metal Laser Sintering of 17-4PH Stainless Steel
Mohamed Shehata, Tarek M. Hatem and Wael A. Samad3D Printing and Additive Manufacturing 6 (4) 227 (2019)
https://doi.org/10.1089/3dp.2017.0106
A Review on Recent Progress in Solid State Friction Based Metal Additive Manufacturing: Friction Stir Additive Techniques
Manu Srivastava, Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee and T. K. KundraCritical Reviews in Solid State and Materials Sciences 44 (5) 345 (2019)
https://doi.org/10.1080/10408436.2018.1490250
2167 020234 (2019)
https://doi.org/10.1063/1.5132101
Optimization and comparison of porosity rate measurement methods of Selective Laser Melted metallic parts
Thibaut de Terris, Olivier Andreau, Patrice Peyre, et al.Additive Manufacturing 28 802 (2019)
https://doi.org/10.1016/j.addma.2019.05.035
Impact of fused deposition modeling (FDM) process parameters on strength of built parts using Taguchi’s design of experiments
Uzair Khaleeq uz Zaman, Emilien Boesch, Ali Siadat, Mickael Rivette and Aamer Ahmed BaqaiThe International Journal of Advanced Manufacturing Technology 101 (5-8) 1215 (2019)
https://doi.org/10.1007/s00170-018-3014-6
Advances in Manufacturing Technology
S. Sathish, V. Anandakrishnan, V. Dillibabu, Duraiselvam Muthukannan and N. BalamuralikrishnanLecture Notes in Mechanical Engineering, Advances in Manufacturing Technology 371 (2019)
https://doi.org/10.1007/978-981-13-6374-0_43
Enhanced mechanical properties and formability of 316L stainless steel materials 3D-printed using selective laser melting
Xiao-qin Yang, Ying Liu, Jin-wen Ye, et al.International Journal of Minerals, Metallurgy and Materials 26 (11) 1396 (2019)
https://doi.org/10.1007/s12613-019-1837-2
Variable Slip Ratio Rolling Contact Fatigue Tester
Marcellin Zahui, Satyam Deshmukh and Subodh SubediJournal of Testing and Evaluation 46 (3) 1042 (2018)
https://doi.org/10.1520/JTE20160039
The quest for mechanically and biologically functional soft biomaterials via soft network composites
Onur Bas, Isabelle Catelas, Elena M. De-Juan-Pardo and Dietmar W. HutmacherAdvanced Drug Delivery Reviews 132 214 (2018)
https://doi.org/10.1016/j.addr.2018.07.015
Influence of surface topography on fatigue behavior of Ti6Al4V alloy by laser powder bed fusion
A.M. Vilardell, P. Krakhmalev, G. Fredriksson, et al.Procedia CIRP 74 49 (2018)
https://doi.org/10.1016/j.procir.2018.08.028
Fracture behaviour of notched as-built EBM parts: Characterization and interplay between defects and notch strengthening behaviour
Mirco Peron, Jan Torgersen, Paolo Ferro and Filippo BertoTheoretical and Applied Fracture Mechanics 98 178 (2018)
https://doi.org/10.1016/j.tafmec.2018.10.004
Geometrical deviation identification and prediction method for additive manufacturing
Zhicheng Huang, Jean-Yves Dantan, Alain Etienne, Mickaël Rivette and Nicolas BonnetRapid Prototyping Journal 24 (9) 1524 (2018)
https://doi.org/10.1108/RPJ-07-2017-0137
In Situ 3D Monitoring of Geometric Signatures in the Powder-Bed-Fusion Additive Manufacturing Process via Vision Sensing Methods
Zhongwei Li, Xingjian Liu, Shifeng Wen, Piyao He, Kai Zhong, Qingsong Wei, Yusheng Shi and Sheng LiuSensors 18 (4) 1180 (2018)
https://doi.org/10.3390/s18041180
High-speed imaging and process characterization of coaxial laser metal wire deposition
Maurizio Motta, Ali Gökhan Demir and Barbara PrevitaliAdditive Manufacturing 22 497 (2018)
https://doi.org/10.1016/j.addma.2018.05.043
Integrated product-process design: Material and manufacturing process selection for additive manufacturing using multi-criteria decision making
Uzair Khaleeq uz Zaman, Mickael Rivette, Ali Siadat and Seyed Meysam MousaviRobotics and Computer-Integrated Manufacturing 51 169 (2018)
https://doi.org/10.1016/j.rcim.2017.12.005
Fast prediction of thermal distortion in metal powder bed fusion additive manufacturing: Part 2, a quasi-static thermo-mechanical model
Hao Peng, Morteza Ghasri-Khouzani, Shan Gong, et al.Additive Manufacturing 22 869 (2018)
https://doi.org/10.1016/j.addma.2018.05.001
Tailoring selective laser melting process for titanium drug-delivering implants with releasing micro-channels
Hany Hassanin, Laurane Finet, Sophie C. Cox, et al.Additive Manufacturing 20 144 (2018)
https://doi.org/10.1016/j.addma.2018.01.005
Effect of manufacturing parameters on the microstructure and mechanical properties of metal laser sintering parts of precipitate hardenable metals
Ala’aldin Alafaghani, Ala Qattawi and Mauricio Alberto Garza CastañónThe International Journal of Advanced Manufacturing Technology 99 (9-12) 2491 (2018)
https://doi.org/10.1007/s00170-018-2586-5
Corrosion of Additively Manufactured Alloys: A Review
G. Sander, J. Tan, P. Balan, O. Gharbi, D.R. Feenstra, L. Singer, S. Thomas, R.G. Kelly, J.R. Scully and N. BirbilisCorrosion 74 (12) 1318 (2018)
https://doi.org/10.5006/2926
Extracting features for manufacture of parts from existing components based on combining additive and subtractive technologies
Van Thao Le, Henri Paris and Guillaume MandilInternational Journal on Interactive Design and Manufacturing (IJIDeM) 12 (2) 525 (2018)
https://doi.org/10.1007/s12008-017-0395-y
Additive manufacturing of biomaterials
Susmita Bose, Dongxu Ke, Himanshu Sahasrabudhe and Amit BandyopadhyayProgress in Materials Science 93 45 (2018)
https://doi.org/10.1016/j.pmatsci.2017.08.003
Computed tomography metrological examination of additive manufactured acetabular hip prosthesis cups
Nadia Kourra, Jason M. Warnett, Alex Attridge, Greg Dibling, James McLoughlin, Sarah Muirhead-Allwood, Richard King and Mark A. WilliamsAdditive Manufacturing 22 146 (2018)
https://doi.org/10.1016/j.addma.2018.04.033
Metallerin lazer katmanlı imalatında farklı proses parametrelerin etkisinin incelenmesi
Özgür Poyraz and Melih Cemal KuşhanGazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 2018 (2018) (2018)
https://doi.org/10.17341/gazimmfd.416479
Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics
Chaohua Gao, Chenyu Wang, Hui Jin, et al.RSC Advances 8 (44) 25210 (2018)
https://doi.org/10.1039/C8RA04815K
510 (2018)
https://doi.org/10.1109/AIM.2018.8452286
Removable partial denture alloys processed by laser‐sintering technique
Omar Alageel, Mohamed‐Nur Abdallah, Ammar Alsheghri, Jun Song, Eric Caron and Faleh TamimiJournal of Biomedical Materials Research Part B: Applied Biomaterials 106 (3) 1174 (2018)
https://doi.org/10.1002/jbm.b.33929
The development of a strategy for direct part reuse using additive and subtractive manufacturing technologies
Van Thao Le, Henri Paris and Guillaume MandilAdditive Manufacturing 22 687 (2018)
https://doi.org/10.1016/j.addma.2018.06.026
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A.M. Tofail, Elias P. Koumoulos, Amit Bandyopadhyay, et al.Materials Today 21 (1) 22 (2018)
https://doi.org/10.1016/j.mattod.2017.07.001
A method to determine the depowdered height in lattices manufactured by electron beam melting
Aurélien Carré, Matthieu Museau, Pierre-Thomas Doutre and Frédéric VignatJournal of Manufacturing Processes 34 1 (2018)
https://doi.org/10.1016/j.jmapro.2018.05.025
Fast prediction of thermal distortion in metal powder bed fusion additive manufacturing: Part 1, a thermal circuit network model
Hao Peng, Morteza Ghasri-Khouzani, Shan Gong, et al.Additive Manufacturing 22 852 (2018)
https://doi.org/10.1016/j.addma.2018.05.023
Dynamic Metamodeling for Predictive Analytics in Advanced Manufacturing
Zhuo Yang, Douglas Eddy, Sundar Krishnamurty, Ian Grosse, Peter Denno, Paul William Witherell and Felipe LopezSmart and Sustainable Manufacturing Systems 2 (1) 18 (2018)
https://doi.org/10.1520/SSMS20170013
680 (2018)
https://doi.org/10.1109/IEEM.2018.8607636
Ultrasonic additive manufacturing of steel: Method, post-processing treatments and properties
Asaf Levy, Aslan Miriyev, Niyanth Sridharan, Tianyang Han, Eran Tuval, Sudarsanam Suresh Babu, Marcelo J. Dapino and Nachum FrageJournal of Materials Processing Technology 256 183 (2018)
https://doi.org/10.1016/j.jmatprotec.2018.02.001
Environmental impact assessment of an innovative strategy based on an additive and subtractive manufacturing combination
Van Thao Le, Henri Paris and Guillaume MandilJournal of Cleaner Production 164 508 (2017)
https://doi.org/10.1016/j.jclepro.2017.06.204
Phase composition and microstructure of WC–Co alloys obtained by selective laser melting
Roman S. Khmyrov, Alexandr P. Shevchukov, Andrey V. Gusarov, Tatyana V. Tarasova and Sergey N. GrigorievMechanics & Industry 18 (7) 714 (2017)
https://doi.org/10.1051/meca/2017059
Transdisciplinary Perspectives on Complex Systems
Paul Witherell, Yan Lu and Al JonesTransdisciplinary Perspectives on Complex Systems 145 (2017)
https://doi.org/10.1007/978-3-319-38756-7_6
Sustainable Value Roadmapping Framework for Additive Manufacturing
Mélanie Despeisse, Miying Yang, Steve Evans, Simon Ford and Tim MinshallProcedia CIRP 61 594 (2017)
https://doi.org/10.1016/j.procir.2016.11.186
A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition
Mingming Ma, Zemin Wang and Xiaoyan ZengMaterials Science and Engineering: A 685 265 (2017)
https://doi.org/10.1016/j.msea.2016.12.112
Advances on Mechanics, Design Engineering and Manufacturing
Van Thao LE and Henri PARIS Guillaume MANDILLecture Notes in Mechanical Engineering, Advances on Mechanics, Design Engineering and Manufacturing 179 (2017)
https://doi.org/10.1007/978-3-319-45781-9_19
Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting
Lu Liu, Paul Kamm, Francisco García-Moreno, John Banhart and Damiano PasiniJournal of the Mechanics and Physics of Solids 107 160 (2017)
https://doi.org/10.1016/j.jmps.2017.07.003
Defect distribution and microstructure heterogeneity effects on fracture resistance and fatigue behavior of EBM Ti–6Al–4V
Mohsen Seifi, Ayman Salem, Daniel Satko, Joshua Shaffer and John J. LewandowskiInternational Journal of Fatigue 94 263 (2017)
https://doi.org/10.1016/j.ijfatigue.2016.06.001
A comparative study of manufacturing processes of complex surface parts in Titanium Ti6Al4V
S.D. Castellanos, Jorge Lino Alves and Rui J. NetoCiência & Tecnologia dos Materiais 29 (2) 73 (2017)
https://doi.org/10.1016/j.ctmat.2017.03.002
Unlocking value for a circular economy through 3D printing: A research agenda
M. Despeisse, M. Baumers, P. Brown, et al.Technological Forecasting and Social Change 115 75 (2017)
https://doi.org/10.1016/j.techfore.2016.09.021
Additive Manufacturing, Cloud-Based 3D Printing and Associated Services—Overview
Felix Baumann and Dieter RollerJournal of Manufacturing and Materials Processing 1 (2) 15 (2017)
https://doi.org/10.3390/jmmp1020015
Selective Laser Melting of Hot Gas Turbine Components: Materials, Design and Manufacturing Aspects
Stergios GoutianosIOP Conference Series: Materials Science and Engineering 219 012022 (2017)
https://doi.org/10.1088/1757-899X/219/1/012022
Process planning for combined additive and subtractive manufacturing technologies in a remanufacturing context
Van Thao Le, Henri Paris and Guillaume MandilJournal of Manufacturing Systems 44 243 (2017)
https://doi.org/10.1016/j.jmsy.2017.06.003
Flaw detection in powder bed fusion using optical imaging
Mostafa Abdelrahman, Edward W. Reutzel, Abdalla R. Nassar and Thomas L. StarrAdditive Manufacturing 15 1 (2017)
https://doi.org/10.1016/j.addma.2017.02.001
Toward a Digital Thread and Data Package for Metals-Additive Manufacturing
D. B. Kim, P. Witherell, Y. Lu and S. FengSmart and Sustainable Manufacturing Systems 1 (1) 75 (2017)
https://doi.org/10.1520/SSMS20160003
Influence of Material‐Related Aspects of Additive and Subtractive Ti‐6Al‐4V Manufacturing on Energy Demand and Carbon Dioxide Emissions
Paolo C. Priarone, Giuseppe Ingarao, Rosa di Lorenzo and Luca SettineriJournal of Industrial Ecology 21 (S1) (2017)
https://doi.org/10.1111/jiec.12523
Powder Consolidation Using Cold Spray
Atieh MoridiSpringerBriefs in Applied Sciences and Technology, Powder Consolidation Using Cold Spray 77 (2017)
https://doi.org/10.1007/978-3-319-29962-4_4
Metrological Investigation of a Selective Laser Melting Additive Manufacturing System: A Case Study
Ali Aidibe, Antoine Tahan and Vladimir BrailovskiIFAC-PapersOnLine 49 (31) 25 (2016)
https://doi.org/10.1016/j.ifacol.2016.12.156
Policy needed for additive manufacturing
Jaime Bonnín Roca, Parth Vaishnav, Erica R. H. Fuchs and M. Granger MorganNature Materials 15 (8) 815 (2016)
https://doi.org/10.1038/nmat4658
Additive manufacturing of metallic components by selective electron beam melting — a review
C. KörnerInternational Materials Reviews 61 (5) 361 (2016)
https://doi.org/10.1080/09506608.2016.1176289
In situ morphology-based defect detection of selective laser melting through inline coherent imaging
Jordan A. Kanko, Allison P. Sibley and James M. FraserJournal of Materials Processing Technology 231 488 (2016)
https://doi.org/10.1016/j.jmatprotec.2015.12.024
Product Lifecycle Management in the Era of Internet of Things
Gianluca D’Antonio, Frédéric Segonds, Joel Sauza Bedolla, Paolo Chiabert and Nabil AnwerIFIP Advances in Information and Communication Technology, Product Lifecycle Management in the Era of Internet of Things 467 761 (2016)
https://doi.org/10.1007/978-3-319-33111-9_69
Personalization in Design through New Technological Achievements
Jelena Micevska and Tatjana KandikjanSouth East European Journal of Architecture and Design 2016 1 (2016)
https://doi.org/10.3889/seejad.2016.10022
Functionalization of Ti6Al4V scaffolds produced by direct metal laser for biomedical applications
Juan J. de Damborenea, Maria Aparecida Larosa, Maria Angeles Arenas, et al.Materials & Design 83 6 (2015)
https://doi.org/10.1016/j.matdes.2015.05.078
Feasibility study on integrated structural health monitoring system produced by metal three-dimensional printing
Maria Strantza, Dieter De Baere, Marleen Rombouts, Gert Maes, Patrick Guillaume and Danny Van HemelrijckStructural Health Monitoring 14 (6) 622 (2015)
https://doi.org/10.1177/1475921715604389
Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V
Mohsen Seifi, Matthew Dahar, Ron Aman, et al.JOM 67 (3) 597 (2015)
https://doi.org/10.1007/s11837-015-1298-7
Modeling of the moving induction heating used as secondary heat source in weld-based additive manufacturing
Xingwang Bai, Haiou Zhang and Guilan WangThe International Journal of Advanced Manufacturing Technology 77 (1-4) 717 (2015)
https://doi.org/10.1007/s00170-014-6475-2
Numerical investigations on hatching process strategies for powder-bed-based additive manufacturing using an electron beam
Matthias Markl, Regina Ammer, Ulrich Rüde and Carolin KörnerThe International Journal of Advanced Manufacturing Technology 78 (1-4) 239 (2015)
https://doi.org/10.1007/s00170-014-6594-9
Design for additive manufacturing in customized products
Hyunwoong Ko, Seung Ki Moon and Jihong HwangInternational Journal of Precision Engineering and Manufacturing 16 (11) 2369 (2015)
https://doi.org/10.1007/s12541-015-0305-9
Challenges of additive manufacturing technologies from an optimisation perspective
Sofiane Guessasma, Weihong Zhang, Jihong Zhu, Sofiane Belhabib and Hedi NouriInternational Journal for Simulation and Multidisciplinary Design Optimization 6 A9 (2015)
https://doi.org/10.1051/smdo/2016001
Fabrication of a Flexible Amperometric Glucose Sensor Using Additive Processes
Xiaosong Du, Christopher J. Durgan, David J. Matthews, et al.ECS Journal of Solid State Science and Technology 4 (4) P3069 (2015)
https://doi.org/10.1149/2.0101504jss