Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Effects of heating rate and sintering temperature on the tensile properties of sintered γ-Ti/Al nanoparticle chains

Huadian Zhang, Qingrui Jiang, Yiwei Han, Michael R Fiske, Jennifer E Edmunson and Shan Jiang
Journal of Physics D: Applied Physics 58 (3) 035309 (2025)
https://doi.org/10.1088/1361-6463/ad8892

Corrosion behavior of steel parts repaired using additive manufacturing: Overview and research perspective

Marina Furbino, Rubén Del Olmo, Reynier I. Revilla and Iris De Graeve
Materials & Design 252 113769 (2025)
https://doi.org/10.1016/j.matdes.2025.113769

Fabrication of AISI 434L Stainless Steel Thin Wall Structures by TIG-Aided Powder Bed Fusion Arc Additive Manufacturing: Evaluation of Metallurgical Characteristics and Mechanical Properties

M. D. Aseef Khan and Manoj Masanta
Journal of Materials Engineering and Performance 34 (11) 10032 (2025)
https://doi.org/10.1007/s11665-024-09874-w

Machine Learning-Based Multi-Objective Optimization for Enhancing the Performance of Block Support Structures for Electron Beam Additive Manufacturing

Mustafa M. Nasr, Wadea Ameen, Abdulmajeed Dabwan and Abdulrahman Al-Ahmari
Metals 15 (6) 671 (2025)
https://doi.org/10.3390/met15060671

Numerical investigation of the effect of geometric defects on dynamic frequency responses in body-centered cubic lattice structures

G. Sal-Anglada, I. Iváñez and M. Braun
The Journal of Strain Analysis for Engineering Design (2025)
https://doi.org/10.1177/03093247241312704

Studies on mechanical and corrosion behaviour of heat-treated AlSi10Mg alloy fabricated by PBF-LM

K. Arun, M. Ramu and Pavan Kalyan Kota
Progress in Additive Manufacturing 9 (4) 1061 (2024)
https://doi.org/10.1007/s40964-023-00503-x

Influence of fillets onto mechanical properties of octet-truss lattice structures

Pierre-Thomas Doutre, Christelle Grandvallet, Léa Gobet, Frédéric Vignat and Rémy Dendievel
The International Journal of Advanced Manufacturing Technology 132 (5-6) 2503 (2024)
https://doi.org/10.1007/s00170-024-13512-z

A systematic review of Inconel 939 alloy parts development via additive manufacturing process

Syed Abbas Raza, Olcay Ersel Canyurt and Hüseyin Kürşad Sezer
Heliyon 10 (3) e25506 (2024)
https://doi.org/10.1016/j.heliyon.2024.e25506

Grain and grain boundary segmentation using machine learning with real and generated datasets

Peter Warren, Nandhini Raju, Abhilash Prasad, Md Shahjahan Hossain, Ramesh Subramanian, Jayanta Kapat, Navin Manjooran and Ranajay Ghosh
Computational Materials Science 233 112739 (2024)
https://doi.org/10.1016/j.commatsci.2023.112739

Advances and significances of titaniumin dental implant applications

Nayem Hossain, Mohammad Aminul Islam, Md. Mir Shakib Ahmed, Mohammad Asaduzzaman Chowdhury, Md Hosne Mobarak, Md. Majibur Rahman and MD. Helal Hossain
Results in Chemistry 7 101394 (2024)
https://doi.org/10.1016/j.rechem.2024.101394

Influence of geometric imperfections on the mechanical behavior for Invar 36 alloy lattice structures fabricated by selective laser melting

Shiyu Ma, Rongqi Zhu, Shuo Yang, Qidong Yang, Kai Wei and Zhaoliang Qu
International Journal of Mechanical Sciences 274 109252 (2024)
https://doi.org/10.1016/j.ijmecsci.2024.109252

Resource-efficient add-on structures for the mechanical postprocessing of laser powder bed fusion parts using five-axis machining

Johannes Waldschmidt, Marcel Dias da Silva, Sebastian Roth and Tim Röver
Journal of Laser Applications 36 (4) (2024)
https://doi.org/10.2351/7.0001637

In-situ synthesis of dual-phase nitrides and multiple strengthening mechanisms in FeCoCrNiAl0.5 high entropy matrix composite coatings by laser cladding and plasma nitriding

Yang Lan, Yong Zhang, Yingbo Peng, Andong Wang, Yuan Gao, Wenfei Yang, Weijie Fan, Wei Zhang and Yong Liu
Journal of Alloys and Compounds 990 174400 (2024)
https://doi.org/10.1016/j.jallcom.2024.174400

Improvements in Injection Moulds Cooling and Manufacturing Efficiency Achieved by Wire Arc Additive Manufacturing Using Conformal Cooling Concept

Alejandro Marqués, Jose Antonio Dieste, Iván Monzón, Alberto Laguía, Pascual Gracia, Carlos Javierre, Isabel Clavería and Daniel Elduque
Polymers 16 (21) 3057 (2024)
https://doi.org/10.3390/polym16213057

Advancements in 3D Printing: Directed Energy Deposition Techniques, Defect Analysis, and Quality Monitoring

Muhammad Mu’az Imran, Azam Che Idris, Liyanage Chandratilak De Silva, Yun-Bae Kim and Pg Emeroylariffion Abas
Technologies 12 (6) 86 (2024)
https://doi.org/10.3390/technologies12060086

Development of rational heat treatment regimes to reduce residual stresses in parts of complex cross-section made of 316L steel using SLM technology

S. V. Adjamskiy, R. V. Podolskyi, G. A. Kononenko, E. S. Klemeshov and O. A. Safronova
Fundamental and applied problems of ferrous metallurgy (38) 501 (2024)
https://doi.org/10.52150/2522-9117-2024-38-501-516

On the use of 3D printing to enhance the thermal performance of building envelope – A Review

Tullio de Rubeis, Annamaria Ciccozzi, Letizia Giusti and Dario Ambrosini
Journal of Building Engineering 110284 (2024)
https://doi.org/10.1016/j.jobe.2024.110284

Synergistic effects of boron carbide and niobium reinforcements on the mechanical performance of Al-8090 alloys

Shanthi Raju Meenuga, Anil Kumar Birru, Kumara Swamy Pulisheru, K Ch Apparao, Bommidi Sridatha, Gadudasu Babu Rao and Praveen Kumar Bannaravuri
Materials Research Express 11 (11) 116524 (2024)
https://doi.org/10.1088/2053-1591/ad94d5

Revolutionizing manufacturing: A comprehensive overview of additive manufacturing processes, materials, developments, and challenges

Kumar Kanishka and Bappa Acherjee
Journal of Manufacturing Processes 107 574 (2023)
https://doi.org/10.1016/j.jmapro.2023.10.024

Investigations of the mechanical and high-temperature tribological properties of the Inconel 718 alloy formed by selective laser melting

JinFang Peng, Xiaowen Lv, Zhijie Lu, Xinlong Liu, Zhujun Li and Zhibiao Xu
Tribology International 188 108813 (2023)
https://doi.org/10.1016/j.triboint.2023.108813

Additive manufacturing: expanding 3D printing horizon in industry 4.0

Gaurav Prashar, Hitesh Vasudev and Dharam Bhuddhi
International Journal on Interactive Design and Manufacturing (IJIDeM) 17 (5) 2221 (2023)
https://doi.org/10.1007/s12008-022-00956-4

Deposition and fabrication of biomaterials using cold spray technique: A review on the application of biomedical-implants

Gaurav Prashar and Hitesh Vasudev
Applied Surface Science Advances 18 100533 (2023)
https://doi.org/10.1016/j.apsadv.2023.100533

Boosting additive circular economy ecosystems using blockchain: An exploratory case study

Inês A. Ferreira, Radu Godina, António Pinto, Pedro Pinto and Helena Carvalho
Computers & Industrial Engineering 175 108916 (2023)
https://doi.org/10.1016/j.cie.2022.108916

Tribological Properties of Additively Manufactured Al-Si Alloys and Steels

Pooja Angolkar and Mohammed Manzoor Hussain
Materials Science Forum 1109 135 (2023)
https://doi.org/10.4028/p-hRaR1o

Mechanical and surface properties of Co–Cr alloy produced by additive manufacturing for removable partial denture frameworks

Larissa Dolfini Alexandrino, Luiz Henrique Martinez Antunes, André Luiz Jardini Munhoz, Antônio Pedro Ricomini Filho and Wander José da Silva
The Journal of Prosthetic Dentistry 130 (5) 780 (2023)
https://doi.org/10.1016/j.prosdent.2021.12.019

Additive Manufacturing Processes in Selected Corrosion Resistant Materials: A State of Knowledge Review

Alisiya Biserova-Tahchieva, Maria V. Biezma-Moraleda, Núria Llorca-Isern, Judith Gonzalez-Lavin and Paul Linhardt
Materials 16 (5) 1893 (2023)
https://doi.org/10.3390/ma16051893

A review of the corrosion behavior of conventional and additively manufactured nickel–aluminum bronze (NAB) alloys: current status and future challenges

Khashayar Morshed-Behbahani, Donald Paul Bishop and Ali Nasiri
Materials Horizons 10 (12) 5391 (2023)
https://doi.org/10.1039/D3MH00951C

PERFORMANCE OF THERMALLY SPRAYED HYDROXYAPATITE COATINGS FOR BIOMEDICAL IMPLANTS: A COMPREHENSIVE REVIEW

GAURAV PRASHAR, HITESH VASUDEV, LALIT THAKUR and AMIT BANSAL
Surface Review and Letters 30 (01) (2023)
https://doi.org/10.1142/S0218625X22410013

Predicting the influence of geometric imperfections on the mechanical response of 2D and 3D periodic trusses

R.N. Glaesener, S. Kumar, C. Lestringant, T. Butruille, C.M. Portela and D.M. Kochmann
Acta Materialia 254 118918 (2023)
https://doi.org/10.1016/j.actamat.2023.118918

Structure Design of Soft Magnetic Materials Using Electron‐Beam‐Based Additive Manufacturing

Jing Yang, Zongwen Fu and Carolin Körner
Advanced Materials 35 (31) (2023)
https://doi.org/10.1002/adma.202300837

A Handbook of Artificial Intelligence in Drug Delivery

Rishi Thakkar, Amit Raviraj Pillai, Vineet R. Kulkarni and Mohammed Maniruzzaman
A Handbook of Artificial Intelligence in Drug Delivery 259 (2023)
https://doi.org/10.1016/B978-0-323-89925-3.00010-1

Current Status and Challenges of Powder Bed Fusion-Based Metal Additive Manufacturing: Literature Review

Naol Dessalegn Dejene and Hirpa G. Lemu
Metals 13 (2) 424 (2023)
https://doi.org/10.3390/met13020424

Toward steel strip insertion during wire arc additive manufacturing of aluminum alloy smart part

Pascal Robert, Nicolas Beraud, Matthieu Museau, Maxime Limousin and Henri Paris
Mechanics & Industry 24 15 (2023)
https://doi.org/10.1051/meca/2023014

Additive manufacturing of metallic biomaterials: sustainability aspect, opportunity, and challenges

Pralhad Pesode and Shivprakash Barve
Journal of Industrial and Production Engineering 40 (6) 464 (2023)
https://doi.org/10.1080/21681015.2023.2229341

Complex geometry and integrated macro-porosity: Clinical applications of electron beam melting to fabricate bespoke bone-anchored implants

Anders Palmquist, Martina Jolic, Eduard Hryha and Furqan A. Shah
Acta Biomaterialia 156 125 (2023)
https://doi.org/10.1016/j.actbio.2022.06.002

Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing

Kishore Pradeep and Bidyut Pal
Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing 381 (2023)
https://doi.org/10.1016/B978-0-323-91834-3.00011-9

Product Lifecycle Management. PLM in Transition Times: The Place of Humans and Transformative Technologies

Marco Spaltini, Federica Acerbi and Marco Taisch
IFIP Advances in Information and Communication Technology, Product Lifecycle Management. PLM in Transition Times: The Place of Humans and Transformative Technologies 667 609 (2023)
https://doi.org/10.1007/978-3-031-25182-5_59

Spatiotemporal characterization of evaporated atoms during electron beam melting additive manufacturing by advanced laser diagnostics

Abderzak el Farsy, Essaid Chakib Tighidet, Charles Ballage and Tiberiu Minea
Journal of Applied Physics 133 (4) (2023)
https://doi.org/10.1063/5.0131102

Weldability of 316L Parts Produced by Metal Additive Manufacturing

Hamdi Selmi, Jean Brousseau, Gabriel Caron-Guillemette, et al.
Journal of Manufacturing and Materials Processing 7 (2) 71 (2023)
https://doi.org/10.3390/jmmp7020071

Advances in polishing of internal structures on parts made by laser-based powder bed fusion

Mingyue Shen and Fengzhou Fang
Frontiers of Mechanical Engineering 18 (1) (2023)
https://doi.org/10.1007/s11465-022-0724-0

Development of a redesign process based on reverse engineering and patent circumvention

Mohammed Akerdad, Ahmed Aboutajeddine and Mohammed Elmajdoubi
International Journal on Interactive Design and Manufacturing (IJIDeM) 17 (1) 261 (2023)
https://doi.org/10.1007/s12008-022-00918-w

The state-of-the-art of wire arc directed energy deposition (WA-DED) as an additive manufacturing process for large metallic component manufacture

Sam C.A. Costello, Chloe R. Cunningham, Fangda Xu, et al.
International Journal of Computer Integrated Manufacturing 36 (3) 469 (2023)
https://doi.org/10.1080/0951192X.2022.2162597

Review of high-performance sustainable polymers in additive manufacturing

Gloria Chyr and Joseph M. DeSimone
Green Chemistry 25 (2) 453 (2023)
https://doi.org/10.1039/D2GC03474C

Effect of solidification behaviors on microstructures and properties of high-entropy alloys coatings by laser melting deposition

Yang Lan, Yingbo Peng, Yong Zhang, Wei Zhang, Wenfei Yang, Andong Wang, Weijie Fan, Liangjun Zhou, Yuan Gao and Qingyuan Ma
Surface and Coatings Technology 473 130028 (2023)
https://doi.org/10.1016/j.surfcoat.2023.130028

Sustainable Materials and Technologies for Biomedical Applications

Pralhad Pesode, Shivprakash Barve, Sagar V. Wankhede, Akbar Ahmad and Chenggao Li
Advances in Materials Science and Engineering 2023 1 (2023)
https://doi.org/10.1155/2023/6682892

Recent progress in solid-state additive manufacturing technique: Friction stir additive manufacturing

Smrity Choudhury, Uttam Acharya, Joydeep Roy and Barnik Saha Roy
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237 (2) 467 (2023)
https://doi.org/10.1177/09544089221107755

Basic Mechanism of Surface Topography Evolution in Electron Beam Based Additive Manufacturing

Christoph Breuning, Julian Pistor, Matthias Markl and Carolin Körner
Materials 15 (14) 4754 (2022)
https://doi.org/10.3390/ma15144754

Study on the Milling of Additive Manufactured Components

Robert Laue, Pascal Colditz, Manuel Möckel and Birgit Awiszus
Metals 12 (7) 1167 (2022)
https://doi.org/10.3390/met12071167

Toward sustainability and resilience with Industry 4.0 and Industry 5.0

Shohin Aheleroff, Huiyue Huang, Xun Xu and Ray Y. Zhong
Frontiers in Manufacturing Technology 2 (2022)
https://doi.org/10.3389/fmtec.2022.951643

Optimisation of Selective Laser Melted Ti6Al4V Functionally Graded Lattice Structures Accounting for Structural Safety

Lei Zhu, Xiaoyang Wang, Liao Sun, Quandong Hu and Nan Li
Materials 15 (24) 9072 (2022)
https://doi.org/10.3390/ma15249072

An Experimental Analysis to Determine the Load-Bearing Capacity of 3D Printed Metals

Bridget Kogo, Chao Xu, Bin Wang, Mahmoud Chizari, Kazem Reza Kashyzadeh and Siamak Ghorbani
Materials 15 (12) 4333 (2022)
https://doi.org/10.3390/ma15124333

Flexural characterization and ductility assessment of small-scale mortar beams reinforced with 3D-printed polymers

M. Talha Junaid, Ahmed Shweiki, Samer Barakat, Mohamad Alhalabi and Omar Mostafa
Structures 45 1751 (2022)
https://doi.org/10.1016/j.istruc.2022.10.007

A Global Methodology for 3d Multi-Material Laser Powder Bed Fusion Processes

Jose Pires, Paulo Pinto, Flávio Bartolomeu, Filipe Silva and Óscar Carvalho
SSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4156726

Additive Manufacturing for Aerospace from Inception to Certification

Devarajan Balaji, Jarabala Ranga, V. Bhuvaneswari, B. Arulmurugan, L. Rajeshkumar, Mohan Prasad Manimohan, G. Ramya Devi, G. Ramya, Chandran Masi and V. Vijayan
Journal of Nanomaterials 2022 (1) (2022)
https://doi.org/10.1155/2022/7226852

Evaluation of the Support Structure Removal Techniques for Additively Manufactured Ti6AL4V Parts

Wadea Ameen, Abdulrahman Al-Ahmari, Muneer Khan Mohammed, Osama Abdulhameed and Antonio Gloria
Advances in Materials Science and Engineering 2022 1 (2022)
https://doi.org/10.1155/2022/2259974

Optimization of perforated support structures for electron beam additive manufacturing

Wadea Ameen, Muneer Khan Mohammed, Abdulrahman Al-Ahmari, et al.
The International Journal of Advanced Manufacturing Technology 120 (11-12) 7305 (2022)
https://doi.org/10.1007/s00170-022-09195-z

Modeling electron beam irradiation of methane

Weiyao Gu and Theodore S. Dibble
International Journal of Chemical Kinetics 54 (4) 256 (2022)
https://doi.org/10.1002/kin.21555

A Review of Emerging Metallic System for High-Energy Beam Additive Manufacturing: Al–Co–Cr–Fe–Ni High Entropy Alloys

Yinuo Guo, Haijun Su, Peixin Yang, et al.
Acta Metallurgica Sinica (English Letters) 35 (9) 1407 (2022)
https://doi.org/10.1007/s40195-022-01400-y

Valorization of a hazardous waste with 3D-printing: Combination of kaolin clay and electric arc furnace dust from the steel making industry

Edisson Ordoñez, Sergio Neves Monteiro and Henry A. Colorado
Materials & Design 217 110617 (2022)
https://doi.org/10.1016/j.matdes.2022.110617

In-situ decarburization and deoxidation during laser powder bed fusion of water-atomized steel C35

Marius Hilzenthaler, Florian Scherm, Haneen Daoud and Uwe Glatzel
Powder Technology 412 117973 (2022)
https://doi.org/10.1016/j.powtec.2022.117973

Optimization of Tree-like Support for Titanium Overhang Structures Produced via Electron Beam Melting

Wadea Ameen, Abdulrahman Al-Ahmari, Syed Hammad Mian, Muneer Khan Mohammed, Husam Kaid and Osama Abdulhameed
Sustainability 14 (20) 13017 (2022)
https://doi.org/10.3390/su142013017

Thermal simulation of wire arc additive manufacturing: a new material deposition and heat input modelling

Akram Chergui, François Villeneuve, Nicolas Béraud and Frédéric Vignat
International Journal on Interactive Design and Manufacturing (IJIDeM) 16 (1) 227 (2022)
https://doi.org/10.1007/s12008-021-00824-7

Dimensionless parameters to define process windows of selective laser melting process to fabricate three-dimensional metal structures

Jihun Noh, Jinhwan Lee, Yejun Seo, et al.
Optics & Laser Technology 149 107880 (2022)
https://doi.org/10.1016/j.optlastec.2022.107880

A review of various materials for additive manufacturing: Recent trends and processing issues

Manu Srivastava, Sandeep Rathee, Vivek Patel, Atul Kumar and Praveennath G. Koppad
Journal of Materials Research and Technology 21 2612 (2022)
https://doi.org/10.1016/j.jmrt.2022.10.015

Recent Trends in Industrial and Production Engineering

Mohit Bhayana, Jaswinder Singh, Bineetpal Singh and Jaspreet Singh
Lecture Notes in Mechanical Engineering, Recent Trends in Industrial and Production Engineering 109 (2022)
https://doi.org/10.1007/978-981-16-3135-1_12

Correlation of Microstructural Evolution with Mechanical and Tribological Behaviour of SS 304 Specimens Developed Through SLM Technique

N. Jeyaprakash, Che-Hua Yang and K. R. Ramkumar
Metals and Materials International 27 (12) 5179 (2021)
https://doi.org/10.1007/s12540-020-00933-0

Concepts, Applications and Emerging Opportunities in Industrial Engineering

Omar Ahmed Al-Shebeeb
Concepts, Applications and Emerging Opportunities in Industrial Engineering (2021)
https://doi.org/10.5772/intechopen.93630

Localization and coalescence of imperfect planar FCC truss lattice metamaterials under multiaxial loadings

A.S. Bhuwal, T. Liu, I. Ashcroft and W. Sun
Mechanics of Materials 160 103996 (2021)
https://doi.org/10.1016/j.mechmat.2021.103996

Metal additive manufacturing using friction stir engineering: A review on microstructural evolution, tooling and design strategies

Sandeep Rathee, Manu Srivastava, Pulak Mohan Pandey, Abhishek Mahawar and Siddhant Shukla
CIRP Journal of Manufacturing Science and Technology 35 560 (2021)
https://doi.org/10.1016/j.cirpj.2021.08.003

Uncertainty quantification of microstructure variability and mechanical behavior of additively manufactured lattice structures

N. Korshunova, I. Papaioannou, S. Kollmannsberger, D. Straub and E. Rank
Computer Methods in Applied Mechanics and Engineering 385 114049 (2021)
https://doi.org/10.1016/j.cma.2021.114049

Environmental impacts of conventional and additive manufacturing for the production of Ti-6Al-4V knee implant: a life cycle approach

Ronan Lyons, Anthony Newell, Pezhman Ghadimi and Nikolaos Papakostas
The International Journal of Advanced Manufacturing Technology 112 (3-4) 787 (2021)
https://doi.org/10.1007/s00170-020-06367-7

Design parameters effects on relative density of triply periodic minimal surfaces for additive manufacturing

E.A. Ramírez, N. Béraud, F. Pourroy, F. Villeneuve and M. Museau
Procedia CIRP 100 13 (2021)
https://doi.org/10.1016/j.procir.2021.05.002

Physico-Chemical Challenges in 3D Printing of Polymeric Nanocomposites and Hydrogels for Biomedical Applications

Massimo Bonini
Journal of Nanoscience and Nanotechnology 21 (5) 2778 (2021)
https://doi.org/10.1166/jnn.2021.19063

Elastic and failure characteristics of additive manufactured thin wall lattice structures with defects

Yan Wu and Li Yang
Thin-Walled Structures 161 107493 (2021)
https://doi.org/10.1016/j.tws.2021.107493

Diffraction-Based Residual Stress Characterization in Laser Additive Manufacturing of Metals

Jakob Schröder, Alexander Evans, Tatiana Mishurova, Alexander Ulbricht, Maximilian Sprengel, Itziar Serrano-Munoz, Tobias Fritsch, Arne Kromm, Thomas Kannengießer and Giovanni Bruno
Metals 11 (11) 1830 (2021)
https://doi.org/10.3390/met11111830

Additive manufacturing technology of polymeric materials for customized products: recent developments and future prospective

Akhilesh Kumar Pal, Amar K. Mohanty and Manjusri Misra
RSC Advances 11 (58) 36398 (2021)
https://doi.org/10.1039/D1RA04060J

A heuristic approach for a scheduling problem in additive manufacturing under technological constraints

Aymen Aloui and Khaled Hadj-Hamou
Computers & Industrial Engineering 154 107115 (2021)
https://doi.org/10.1016/j.cie.2021.107115

Advances on Mechanics, Design Engineering and Manufacturing III

Akram Chergui, Nicolas Beraud, Frédéric Vignat and François Villeneuve
Lecture Notes in Mechanical Engineering, Advances on Mechanics, Design Engineering and Manufacturing III 61 (2021)
https://doi.org/10.1007/978-3-030-70566-4_11

Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020)

Thi Ai Lanh Nguyen, Le Nhat Hoang Tran, Henri Paris and Mathieu Museau
Lecture Notes in Mechanical Engineering, Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020) 685 (2021)
https://doi.org/10.1007/978-3-030-69610-8_91

Precise control of variable-height laser metal deposition using a height memory strategy

Tuo Shi, Jianjun Shi, Zhixin Xia, et al.
Journal of Manufacturing Processes 57 222 (2020)
https://doi.org/10.1016/j.jmapro.2020.05.026

New Challenges and Industrial Applications for Corrosion Prevention and Control

Oscar Sotelo-Mazon, John Henao, Astrid Lorena Giraldo-Betancur, Carlos A. Poblano-Salas and Jorge Corona-Castuera
Advances in Chemical and Materials Engineering, New Challenges and Industrial Applications for Corrosion Prevention and Control 41 (2020)
https://doi.org/10.4018/978-1-7998-2775-7.ch003

Hybrid subtractive–additive manufacturing processes for high value-added metal components

Panagiotis Stavropoulos, Harry Bikas, Oliver Avram, Anna Valente and George Chryssolouris
The International Journal of Advanced Manufacturing Technology 111 (3-4) 645 (2020)
https://doi.org/10.1007/s00170-020-06099-8

Fatigue behavior and modeling for additive manufactured 304L stainless steel: The effect of surface roughness

Seungjong Lee, Jonathan W. Pegues and Nima Shamsaei
International Journal of Fatigue 141 105856 (2020)
https://doi.org/10.1016/j.ijfatigue.2020.105856

Effect of processing parameters on forming defects during selective laser melting of AlSi10Mg powder

Haihua Wu, Junfeng Li, Zhengying Wei and Pei Wei
Rapid Prototyping Journal 26 (5) 871 (2020)
https://doi.org/10.1108/RPJ-07-2018-0184