Phase composition and microstructure of WC–Co alloys obtained by selective laser melting
Mechanics & Industry, 18 7 (2017) 714
Published online: 2017-12-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Tribological aspects and their drivers in 3D-printed cermets and hardmetals
H. S. Maurya, R. Kumar and K. G. PrashanthDiscover Materials 6 (1) (2026)
https://doi.org/10.1007/s43939-026-00566-x
Additive manufacturing of cemented carbides: Differences between beam-based and sinter-based technologies
Mehrdad Zarinejad, Haibin Wang, Erqi Yang, Yunxiang Tong, Yonglong Xu and Xiaoyan SongInternational Materials Reviews 71 (3) 199 (2026)
https://doi.org/10.1177/09506608251382364
153 (2026)
https://doi.org/10.1002/9783527851751.ch5
Tungsten carbide-cobalt based hardmetals via additive manufacturing: Insights into processing–structure–property relationships
Ratnesh Raj, Ankit Kumar, Suman Saha and Gurminder SinghCeramics International 52 (4) 4097 (2026)
https://doi.org/10.1016/j.ceramint.2025.12.284
Additive manufacturing of ceramic materials. An overview
K. I. Ikonnikov, B. L. Krasnyi, A. M. Poskotinova, A. L. Galganova, O. I. Rodimov and A. S. SizovaNOVYE OGNEUPORY (NEW REFRACTORIES) (3) 77 (2026)
https://doi.org/10.17073/1683-4518-2025-3-77-93
Stress effects after two types of irradiation, with heavy ions and gamma rays, on WC–10Co: hard alloy
E. Popov, A. Beskrovnyi, K. Krezhov, E. Demir, M. Kamislioglu, E. Mustafayev, D. Mirzayeva, A. Hashhash, A. Sidorin and M. MirzayevThe European Physical Journal Special Topics 235 (4) 1209 (2026)
https://doi.org/10.1140/epjs/s11734-025-01762-1
Binder jet additive manufacturing of tungsten carbide-cobalt tooling material
Kunal B. Patel, Sameehan S. Joshi, K. N. Chaithanya Kumar, Shreyash M. Patil, Shashank Sharma and Narendra B. DahotrePowder Metallurgy 68 (5) 449 (2025)
https://doi.org/10.1177/00325899251348358
Laser‐Based Solidification of Cermets/Cemented Carbides: Processing‐Microstructure‐Property Relationships
Himanshu Singh Maurya, Farid Akhtar and Konda Gokuldoss PrashanthAdvanced Materials Technologies (2025)
https://doi.org/10.1002/admt.202500988
Critical review of metal-ceramic composites fabricated through additive manufacturing for extreme condition applications
Chinmai Bhat, Cho-Pei Jiang, Yulius Shan Romario, Sandeep Kumar Paral and Ehsan ToyserkaniMechanics of Advanced Materials and Structures 32 (10) 2153 (2025)
https://doi.org/10.1080/15376494.2024.2376337
(2025)
https://doi.org/10.2139/ssrn.5087196
HIP-driven microstructural evolution in TiN/Ti cermet-modified layers enhances wide temperature range wear resistance
Qianqian Cheng, Jie Jin and Jun ZhengMaterials Futures 4 (4) 045002 (2025)
https://doi.org/10.1088/2752-5724/adf4fa
Optimising WC-25Co Feedstock and Parameters for Laser-Directed Energy Deposition
Helder Nunes, José Nhanga, Luís Regueiras, Ana Reis, Manuel F. Vieira, Bruno Guimarães, Daniel Figueiredo, Cristina Fernandes and Omid EmadiniaJournal of Manufacturing and Materials Processing 9 (8) 279 (2025)
https://doi.org/10.3390/jmmp9080279
Additive Manufacturing of Tungsten Carbide (WC)-Based Cemented Carbides and Niobium Carbide (NbC)-Based Cermets with High Binder Content via Laser Powder Bed Fusion
Fabio Miranda, Marcelo Otavio dos Santos, Rodrigo Condotta, Nathalia Marina Gonçalves Pereira, Daniel Rodrigues, Suzilene Real Janasi, Fernando dos Santos Ortega, Marcello Vertamatti Mergulhão, Rodrigo Santiago Coelho, René Ramos de Oliveira, Luis Gallego Martinez and Gilmar Ferreira BatalhaMetals 14 (12) 1333 (2024)
https://doi.org/10.3390/met14121333
Thermoelectric properties investigation of Tungsten carbide-filled poly (vinyl alcohol)/Polypyrrole ternary composites
Gizem Arslantürk and Volkan UgraskanPolymer-Plastics Technology and Materials 63 (2) 151 (2024)
https://doi.org/10.1080/25740881.2023.2278071
The effect of nominal powder thickness on solidification behavior of atypical multilayer WC–Co components fabricated by laser-powder bed fusion
Mohaimen Al-Thamir, Samer J. Algodi, Kamaal S. Al-Hamdani and Aqeel A. AbedProgress in Additive Manufacturing 9 (2) 237 (2024)
https://doi.org/10.1007/s40964-023-00445-4
Microstructure and mechanical properties of WC-12Co cemented carbide fabricated by laser powder bed fusion on a WC-20Co cemented carbide substrate
Jianping Fu, Li Zhang, Hang Wang, Yuxia Zhao, Xiaohui Yang, Jinfang Zhang, Zhigang Chen, Yuankui Cao, Bin Liu and Xiaofeng LiJournal of Materials Research and Technology 30 9093 (2024)
https://doi.org/10.1016/j.jmrt.2024.05.266
Dependence of Density, Hardness, Strength, and Dimensions of WC–15 Co Hard Alloy Samples on the Plasticizer Content in Workpieces Obtained Using a Plastic Mold Made by 3D Printing
M. I. Dvornik, E. A. Mikhailenko, A. A. Burkov and D. A. KolzunInorganic Materials: Applied Research 15 (5) 1457 (2024)
https://doi.org/10.1134/S2075113324701132
Investigating the laser power and trajectory effect on milled surface quality during SiC ceramic processing
Xiaohui Li, Xin Ding and Haixin GaoEngineering Research Express 6 (4) 045406 (2024)
https://doi.org/10.1088/2631-8695/ad8390
Manufacturing of WC-17Co 3D-objects by Laser Powder Bed Fusion followed by heat-treatment
Kevin Papy, Julien Favre, Alexey Sova, Andras Borbely, Philippe Bertrand and Jean-Marc StaerckMatériaux & Techniques 111 (3) 304 (2023)
https://doi.org/10.1051/mattech/2023016
Development and Characterization of Nano-Al2O3, Cr2O3, and TiO2 Dispersed Mo Alloys Fabricated by Powder Metallurgy
G. M. Rao, M. Akhil, B. Das, et al.Journal of Materials Engineering and Performance 32 (4) 1683 (2023)
https://doi.org/10.1007/s11665-022-07215-3
Selective Laser Melting of TiC-Based Cermet: HIP Studies
H. S. Maurya, L. Kollo, M. Tarraste, et al.Transactions of the Indian Institute of Metals 76 (2) 565 (2023)
https://doi.org/10.1007/s12666-022-02684-5
Carbon control and densification of WC-8%Co fabricated by extrusion-based additive manufacturing under pressureless sintering
Zai Zhao, Rutie Liu, Jie Chen and Xiang XiongMaterials Today Communications 36 106866 (2023)
https://doi.org/10.1016/j.mtcomm.2023.106866
Laser powder bed fusion of Alumina/Fe–Ni ceramic matrix particulate composites impregnated with a polymeric resin
Mohammad Azami, Armin Siahsarani, Amir Hadian, Zahra Kazemi, Davood Rahmatabadi, Seyed Farshid Kashani-Bozorg and Karen AbriniaJournal of Materials Research and Technology 24 3133 (2023)
https://doi.org/10.1016/j.jmrt.2023.03.181
Advances in 3D Printing
Guiomar Riu Perdrix and Joan Josep Roa RoviraAdvances in 3D Printing (2023)
https://doi.org/10.5772/intechopen.110299
Wear-resistant coatings produced by high-speed selective laser sintering of wet-milled W Fe powders: Phase composition, microstructure, and properties
M.A. Eryomina, S.F. Lomayeva, E.V. Kharanzhevsky and A.N. Bel'tyukovInternational Journal of Refractory Metals and Hard Materials 108 105915 (2022)
https://doi.org/10.1016/j.ijrmhm.2022.105915
Iron aluminides as an alternative binder for cemented carbides: A review and perspective towards additive manufacturing
A.M. Vilardell, N. Cinca, E. Tarrés and M. KobashiMaterials Today Communications 31 103335 (2022)
https://doi.org/10.1016/j.mtcomm.2022.103335
Laser powder bed fusion of cemented carbides by developing a new type of Co coated WC composite powder
Lei Zhang, Chaoquan Hu, Yafeng Yang, R.D.K. Misra, Katsuyoshi Kondoh and Yanan LuAdditive Manufacturing 55 102820 (2022)
https://doi.org/10.1016/j.addma.2022.102820
Laser remelting of WC-CoCr surface coated by HVOF: Effect on the tribological properties and energy efficiency
Richard de Medeiros Castro, Elvys Isaías Mercado Curi, Luiz Fernando Feltrim Inacio, Alexandre da Silva Rocha, Milton Pereira, Rafael Gomes Nunes Silva and Adriano de Souza Pinto PereiraSurface and Coatings Technology 427 127841 (2021)
https://doi.org/10.1016/j.surfcoat.2021.127841
Research progress on selective laser melting of hard composite materials
Y X XieJournal of Physics: Conference Series 1798 (1) 012018 (2021)
https://doi.org/10.1088/1742-6596/1798/1/012018
Role of Co Content on Densification and Microstructure of WC–Co Cemented Carbides Prepared by Selective Laser Melting
Jinyang Liu, Jian Chen, Li Zhou, et al.Acta Metallurgica Sinica (English Letters) 34 (9) 1245 (2021)
https://doi.org/10.1007/s40195-021-01195-4
Additive manufacturing of ceramics and cermets: present status and future perspectives
Mainak Saha and Manab MallikSādhanā 46 (3) (2021)
https://doi.org/10.1007/s12046-021-01685-2
Diamond-reinforced cutting tools using laser-based additive manufacturing
Kellen D. Traxel and Amit BandyopadhyayAdditive Manufacturing 37 101602 (2021)
https://doi.org/10.1016/j.addma.2020.101602
Studying Gas-Phase Flows in the Laser Exposure Zone during Selective Laser Melting
Pavel Anatolyevich Podrabinnik, C.E. Protasov and A.V. GusarovMaterials Science Forum 989 806 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.989.806
Additive manufacturing of WC-Co hardmetals: a review
Yankun Yang, Chaoqun Zhang, Dayong Wang, et al.The International Journal of Advanced Manufacturing Technology 108 (5-6) 1653 (2020)
https://doi.org/10.1007/s00170-020-05389-5
Additive Manufacturing of Tungsten Carbide Hardmetal Parts by Selective Laser Melting (SLM), Selective Laser Sintering (SLS) and Binder Jet 3D Printing (BJ3DP) Techniques
Padmakumar M.Lasers in Manufacturing and Materials Processing 7 (3) 338 (2020)
https://doi.org/10.1007/s40516-020-00124-0
Processability of Atypical WC-Co Composite Feedstock by Laser Powder-Bed Fusion
Mohaimen Al-Thamir, D. Graham McCartney, Marco Simonelli, Richard Hague and Adam ClareMaterials 13 (1) 50 (2019)
https://doi.org/10.3390/ma13010050
Possibilities of Manufacturing Products from Cermet Compositions Using Nanoscale Powders by Additive Manufacturing Methods
Sergei Grigoriev, Tatiana Tarasova, Andrey Gusarov, Roman Khmyrov and Sergei EgorovMaterials 12 (20) 3425 (2019)
https://doi.org/10.3390/ma12203425