An efficient and robust VUMAT implementation of elastoplastic constitutive laws in Abaqus/Explicit finite element code
Mechanics & Industry, 19 3 (2018) 308
Published online: 2018-09-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Relaxation-time approach for modelling complex coupled rate–temperature effects of metallic materials under impact loads
Shixiang Zhao, M.N. Antonova, A. Yu. Konstantinov, R.V. Lukashov, A.M. Bragov, Zejian Xu, Mingyi Zheng and Yu. V. PetrovInternational Journal of Impact Engineering 213 105687 (2026)
https://doi.org/10.1016/j.ijimpeng.2026.105687
Improved tensile characteristics of multi-layered composite under projectile impact: A modified HJC model
Shashwat Kapoor and Sonalisa RayEngineering Failure Analysis 194 110956 (2026)
https://doi.org/10.1016/j.engfailanal.2026.110956
Dynamic mechanical behavior and modified Johnson-Cook constitutive model of 95W-Ni-Fe-Co alloy under different processing conditions
Rui Zhu, Xuan Zhou, Dongsheng Han, Yiding Wu, Wencheng Lu and Guangfa GaoTheoretical and Applied Mechanics Letters 16 (2) 100632 (2026)
https://doi.org/10.1016/j.taml.2025.100632
A modified Johnson-Cook constitutive model for austenitic stainless steel under wide cryogenic temperature and strain rate ranges
Xinbo Yu, Xinhua Wang, Xiaoqiu Ma, Lianhua Ma, Biao Wang, Zisheng Guo and Qinmeng WangInternational Journal of Pressure Vessels and Piping 220 105725 (2026)
https://doi.org/10.1016/j.ijpvp.2025.105725
A Combined Experimental–Numerical Approach for Modeling Anisotropic Martensitic Transformation in TRIP 304L Steel under Tension and Bending
Amar Boudedja, Madjid Almansba, Malek Habak, Rabah Ferhoum and Mokhtar BencherifJournal of Materials Engineering and Performance 35 (17) 17367 (2026)
https://doi.org/10.1007/s11665-025-12825-8
PyVUMAT: A package to develop and deploy machine learning material models in finite element analysis simulations
Joshua C. CroneComputational Materials Science 262 114377 (2026)
https://doi.org/10.1016/j.commatsci.2025.114377
On the development of neural network and phenomenological constitutive models for polycarbonate under thermomechanical and impact loading: Experimental and numerical approaches
Cem I. Kapcı, Aiman Tariq, Murat Yazıcı, Babür Deliktaş and George Z. VoyiadjisEuropean Journal of Mechanics - A/Solids 119 106181 (2026)
https://doi.org/10.1016/j.euromechsol.2026.106181
Perforation of AA6061-T651 plates by 4340 steel ogive-nose rods with normal impacts
Thomas L Warren and Sreten MastilovicInternational Journal of Protective Structures 17 (2) 666 (2026)
https://doi.org/10.1177/20414196251388143
Compressive responses of an additively manufactured magnesium alloy at elevated strain rates and temperatures: Experiments and modeling
B.S. Wang, X. Liu, H. Yang, Y.X. Zheng, J.C. Cheng, F.H. Zhou and J.Y. HuangInternational Journal of Impact Engineering 207 105489 (2026)
https://doi.org/10.1016/j.ijimpeng.2025.105489
High-Fidelity modeling of cold spray: Improved constitutive material model and nonlocal mesh sensitivity mitigation
Xuanyu Ge, Linglong Zhou, Sara Bagherifard and Mario GuaglianoInternational Journal of Mechanical Sciences 321 111654 (2026)
https://doi.org/10.1016/j.ijmecsci.2026.111654
On the Use of Adaptive Mesh Refinement for Modelling the Taylor Impact Test with the CEL Formulation
François Ducobu, Olivier Pantalé, Laurent Spitaels and Domenico UmbrelloDefect and Diffusion Forum 450 41 (2026)
https://doi.org/10.4028/p-GVG0Wh
Eulerian solver for coupled problems of high-speed elastic-plastic deforming inert or reactive materials with a gaseous environment
Oren Peles, Moran Ezra, Marcel Martins Alves, Nitsan Briskin, Sharon Peles, Avi Uzi, David Touati and Yoram KozakJournal of Computational Physics 559 114893 (2026)
https://doi.org/10.1016/j.jcp.2026.114893
The recrystallization mechanism and its effects on texture in pre-twinned AZ31 magnesium alloy during medium-high temperature impact loading
Xiao Liu, Xiaofeng Zhang, Biwu Zhu, Chao Xie, Bibo Hu, Wenhui Liu, Luoxing Li, Congchang Xu and Pengcheng GuoJournal of Magnesium and Alloys 101757 (2025)
https://doi.org/10.1016/j.jma.2025.04.023
Warpage Prediction in Wire Arc Additive Manufacturing: A Comparative Study of Isotropic and Johnson–Cook Plasticity Models
Saeed Behseresht and Young Ho ParkMetals 15 (6) 665 (2025)
https://doi.org/10.3390/met15060665
A novel phenomenological material model and calibration for high temperature material behaviour of AA5083
Zackary Fuerth, Daniel E Green and William J AltenhofProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2025)
https://doi.org/10.1177/14644207251340061
Influence of Orientation on the Dynamic Compression Properties of Poly(methyl methacrylate)
Hongyu Lu, Zitong Lu, Xueting Xu, Hanqin Rui, Mengyao Zheng, Zezong Yu, Mengyu Qi, Mao Wang, Xiaowen Zhang and Yue YanThe Journal of Physical Chemistry B 129 (36) 9256 (2025)
https://doi.org/10.1021/acs.jpcb.5c02703
Thermoelastic impact modeling for projectile–target–muzzle components during penetration start of motion
Jacob NaglerThe Journal of Defense Modeling and Simulation: Applications, Methodology, Technology 22 (4) 405 (2025)
https://doi.org/10.1177/15485129231210300
Unified non-hourglass formulation for total Lagrangian SPH solid dynamics
Dong Wu, Xiaojing Tang, Shuaihao Zhang and Xiangyu HuComputational Mechanics 75 (3) 1081 (2025)
https://doi.org/10.1007/s00466-024-02552-7
A Modified Johnson–Cook Model for Modeling AA6061-T6 under Different Temperatures Considering Ductile Fracture
Hangyu Wu and Haiyan YuJournal of Materials Engineering and Performance 34 (2) 1 (2025)
https://doi.org/10.1007/s11665-023-09127-2
Microcracking in additively manufactured tungsten: Experiment and a nano-micro-macro multiscale model
Zhun Liang, Junhao Wu, Changmeng Liu and Yinan CuiInternational Journal of Plasticity 186 104264 (2025)
https://doi.org/10.1016/j.ijplas.2025.104264
Shock-induced chemical reaction of Al/Ni composites subjected to hypervelocity impact: Experimental work and numerical simulation
Jiamin Wang, Wei Xiong, Xianwei Hou, Hengheng Geng, Zhongwei Guan and Xianfeng ZhangJournal of Applied Physics 137 (17) (2025)
https://doi.org/10.1063/5.0257226
Simulation-based investigation on ultra-precision machining of additively manufactured Ti-6Al-4V ELI alloy and the associated experimental study
K Manjunath, Suman Tewary, Neha Khatri and Kai ChengProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 238 (10) 1554 (2024)
https://doi.org/10.1177/09544054231196920
Research on serrated chip morphology for turning Ti6Al4V titanium alloy by considering damage evolution
Zichuan Zou, Lin He, Ting Zhang, Tao Zhou and Pengfei TianJournal of Manufacturing Processes 118 283 (2024)
https://doi.org/10.1016/j.jmapro.2024.02.052
Consistent explicit formulation for adiabatic thermal softening of Johnson–Cook model with improved numerical stability for implicit solver
Samy Abu-Salih and Rami MasriJournal of Mechanics of Materials and Structures 19 (4) 685 (2024)
https://doi.org/10.2140/jomms.2024.19.685
Experimental and formula deduction on the mechanical performance of Fang in Dou-Gong of Song dynasty
Long Zhang, Chuang Liu, Ting Zhou, Yuqing Qin and Song GaoScientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-81623-4
Ultrasonic vibration-assisted tube extrusion shear expansion (UVaTESE): A novel process to manipulate the texture of AZ31 magnesium alloy
Jianxing Zhao, Chaowei Zeng, Ting Yuan, Wenyu Du, Yujiang Liu, Yan Wang, Hongjun Hu and Zhuoran ZengJournal of Materials Processing Technology 334 118634 (2024)
https://doi.org/10.1016/j.jmatprotec.2024.118634
On Thermoelastic Impact Modelling of Frozen Composite Target During Pre – Heated Projectile Penetration Starts of Motion
Jacob NaglerPROOF 4 26 (2024)
https://doi.org/10.37394/232020.2024.4.4
An Improved GPU-Parallelized 2D/3D Elastoplastic-Damage-Fracture Joint Framework for Combined Finite–Discrete-Element Program
Bo-nan Zhang, Bo Han and Qingsong ZhangRock Mechanics and Rock Engineering 57 (5) 3971 (2024)
https://doi.org/10.1007/s00603-023-03738-w
Simulation of the Dynamic Responses of Layered Polymer Composites under Plate Impact Using the DSGZ Model
Huadian Zhang, Arunachalam M. Rajendran, Manoj K. Shukla, Sasan Nouranian, Ahmed Al-Ostaz, Steven Larson and Shan JiangJournal of Composites Science 8 (5) 159 (2024)
https://doi.org/10.3390/jcs8050159
Jetting Phenomenon in Cold Spray: A Critical Review on Finite Element Simulations
S. Rahmati, J. Mostaghimi, T. Coyle and A. DolatabadiJournal of Thermal Spray Technology 33 (5) 1233 (2024)
https://doi.org/10.1007/s11666-024-01766-8
A thermal damage-coupled constitutive model for predicting fracture and microstructure evolution and its application in the hot spinnability process
He Wu, Qinke Qian, Wenchen Xu, Chenglu Liu, Jiawei Xu, Debin Shan and Bin GuoJournal of Materials Research and Technology 30 1594 (2024)
https://doi.org/10.1016/j.jmrt.2024.03.131
A modified Johnson–Cook constitutive model for titanium alloy TA31 and its implementation into FE
Pei Liang, Jie Zhang and Ning KongMaterials Testing 65 (2) 192 (2023)
https://doi.org/10.1515/mt-2022-0371
Low velocity impact on fibre metal laminates: A review
Sasanka Kakati and Debabrata ChakrabortyJournal of Composite Materials 57 (30) 4731 (2023)
https://doi.org/10.1177/00219983231212544
Comparing Activation Functions in Machine Learning for Finite Element Simulations in Thermomechanical Forming
Olivier PantaléAlgorithms 16 (12) 537 (2023)
https://doi.org/10.3390/a16120537
A Modified Arrhenius‐Type Constitutive Model and its Implementation by Means of the Safe Version of Newton–Raphson Method
Pei Liang, Ning Kong, Jie Zhang and Hongbo Listeel research international 94 (1) (2023)
https://doi.org/10.1002/srin.202200443
Numerical Simulation of the Taylor Impact Test for Laser Powder Bed Fusion Parts Based on Microstructural Internal State Variables
Amos Muiruri, Maina Maringa and Willie du PreezApplied Sciences 13 (9) 5372 (2023)
https://doi.org/10.3390/app13095372
Thermal Aging Effect on the Compression Behavior of Thermoplastic Polymers—Proposed Phenomenological Model
Aghilas Hannou, Rabah Ferhoum, Madjid Almansba, Malek Habak and Raphaël VelascoJournal of Failure Analysis and Prevention 23 (2) 781 (2023)
https://doi.org/10.1007/s11668-023-01608-9
Development and Implementation of an ANN Based Flow Law for Numerical Simulations of Thermo-Mechanical Processes at High Temperatures in FEM Software
Olivier PantaléAlgorithms 16 (1) 56 (2023)
https://doi.org/10.3390/a16010056
Role of Shear on Strength and Damage Evolution in Soda-Lime Glass Under High Dynamic Pressures
Vatsa Gandhi, Barry P. Lawlor, Christian Kettenbeil and Guruswami RavichandranJournal of Applied Mechanics 90 (12) (2023)
https://doi.org/10.1115/1.4063031
Numerical investigation on spall fracture in metallic materials due to laser shock peening via phase field approach to fracture
Shuaipeng Qi and Yongxing ShenEngineering Fracture Mechanics 292 109598 (2023)
https://doi.org/10.1016/j.engfracmech.2023.109598
Efficient implementation of non-linear flow law using neural network into the Abaqus Explicit FEM code
Olivier Pantalé, Pierre Tize Mha and Amèvi TongneFinite Elements in Analysis and Design 198 103647 (2022)
https://doi.org/10.1016/j.finel.2021.103647
Study on the mechanical characteristics of Xia-Ang in the Song-style Dou-Gong set on columns
Long Zhang, Weikun Dong and Ting ZhouStructures 41 475 (2022)
https://doi.org/10.1016/j.istruc.2022.05.031
Development of VUMAT and VUHARD Subroutines for Simulating the Dynamic Mechanical Properties of Additively Manufactured Parts
Amos Muiruri, Maina Maringa and Willie du PreezMaterials 15 (1) 372 (2022)
https://doi.org/10.3390/ma15010372
Modeling of multi-edge effects in the case of laser shock loadings applied on thin foils: Application for material characterization of aluminum alloys
M. Ayad, L. Lapostolle, A. Rondepierre, C. Le Bras, M. Scius-Bertrand, S. Ünaldi, U. Trdan, Y. Rouchausse, J. Grassy, T. Maillot, V. Lapoujade, C. Michel and L. BertheJournal of Applied Physics 131 (9) (2022)
https://doi.org/10.1063/5.0080326
Thermal aging effect on the mechanical behavior of polycarbonate: Experimental and modeling
Hannou Aghilas, Ferhoum Rabah and Almansba MadjidMaterials Today: Proceedings 53 202 (2022)
https://doi.org/10.1016/j.matpr.2021.12.551
Nonlinear Finite-Element Modeling of HF2V Lead Extrusion Damping Devices: Generic Design Tool
Vishnupriya Vishnupriya, G. W. Rodgers and J. G. ChaseJournal of Structural Engineering 148 (1) (2022)
https://doi.org/10.1061/(ASCE)ST.1943-541X.0003170
Strain-Rates Dependent Constitutive Law for Crashworthiness and Parameter Sensitivity Analysis of Woven Composites
R. Lombarkia, A. Gakwaya, D. Nandlall, et al.Aerotecnica Missili & Spazio 101 (1) 33 (2022)
https://doi.org/10.1007/s42496-022-00108-7
Finite strain numerical model for the nonlinear analysis of thin shells
Hrvoje Smoljanović, Ivan Balić, Boris Trogrlić, Nikolina Živaljić and Ante MunjizaEngineering Structures 234 111964 (2021)
https://doi.org/10.1016/j.engstruct.2021.111964
Numerical Simulation of the Cold Spray Deposition of Copper Particles on Polyether Ether Ketone (PEEK) Substrate
Wei Tang, Jiayuan Zhang, Yan Li, Bo Yu and Jiabin ZhaoJournal of Thermal Spray Technology 30 (7) 1792 (2021)
https://doi.org/10.1007/s11666-021-01254-3
Rotation-Free Based Numerical Model for Nonlinear Analysis of Thin Shells
Hrvoje Smoljanović, Ivan Balić, Ante Munjiza and Viktor HristovskiBuildings 11 (12) 657 (2021)
https://doi.org/10.3390/buildings11120657
Materials Design and Applications III
R. L. Amaral, A. D. Santos, D. G. Wagre, et al.Advanced Structured Materials, Materials Design and Applications III 149 223 (2021)
https://doi.org/10.1007/978-3-030-68277-4_15
Rate-dependent combined necking and fracture model for predicting ductile fracture with shell elements at high strain rates
Burak Can Cerik and Joonmo ChoungInternational Journal of Impact Engineering 146 103697 (2020)
https://doi.org/10.1016/j.ijimpeng.2020.103697
A thermomechanical model for mesh deflection calculation of crown spur gear pair
Yong Yang, Jiaxu Wang, Gang Zhu, Wanyou Yang and Qinghua ZhouMeccanica 55 (6) 1393 (2020)
https://doi.org/10.1007/s11012-020-01160-y