The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Optimizing structural performance of Savonius turbine blades through comparative analysis of mechanical properties
Muhamad Hasfanizam Mat Yazik, Mohammad Hafifi Hafiz Ishak, Wei Shyang Chang, Farzad Ismail, Mohd Hafiz Zawawi, Ali Najah Ahmed, Lariyah Mohd Sidek and Hidayah Basri Physics of Fluids 36(8) (2024) https://doi.org/10.1063/5.0225390
In Situ Microscopy of Fatigue-Loaded Embedded Transverse Layers of Cross-Ply Laminates: The Role of an Inhomogeneous Fiber Distribution
Characterising the shear resistance of a unidirectional non-crimp glass fabric using modified picture frame and uniaxial bias extension test methods
K. D. H. N. Kahavita, E. D. McCarthy, M. Zhang, C. M. Ó Brádaigh and P. Harrison International Journal of Material Forming 16(5) (2023) https://doi.org/10.1007/s12289-023-01765-0
Determination of as-built properties of fiber reinforced polymers in a wind turbine blade using scanning electron and high-resolution X-ray microscopy
Malo Rosemeier, Catherine Lester, Alexandros Antoniou, Christoph Fahrenson, Nikolas Manousides and Claudio Balzani Composites Part C: Open Access 9 100310 (2022) https://doi.org/10.1016/j.jcomc.2022.100310
Experimental and Numerical Comparison of Impact Behavior between Thermoplastic and Thermoset Composite for Wind Turbine Blades
Thiago Henrique Lara Pinto, Waseem Gul, Libardo Andrés González Torres, Carlos Alberto Cimini and Sung Kyu Ha Materials 14(21) 6377 (2021) https://doi.org/10.3390/ma14216377
Design of lamina orientation for biaxially loaded off-axis tunnelling cracks
Towards balancing in-plane mechanical properties and impact damage tolerance of composite laminates using quasi-UD woven fabrics with hybrid warp yarns
A method to determine composite material residual tensile strength in the fibre direction as a function of the matrix damage state after fatigue loading