Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Effect of drilling parameters on the hole surface integrity of low alloy steel for nuclear power during BTA deep hole drilling

Binghao Li, Chuanzhen Huang, Zhengyi Tang, Zhen Chen, Hanlian Liu, Zengtao Chen, Jiahui Niu and Zhen Wang
The International Journal of Advanced Manufacturing Technology 127 (1-2) 565 (2023)
https://doi.org/10.1007/s00170-023-11530-x

Deep-hole axis deviation mechanism of weak stiffness small-diameter single-lip tool in low-frequency vibration-assisted drilling

Shaomin Li, Haichun Peng, Chao Ding, Hui Tang and Chunjian Liu
The International Journal of Advanced Manufacturing Technology 124 (7-8) 2719 (2023)
https://doi.org/10.1007/s00170-022-10613-5

The effect of trepanning parameters on wear of tool and surface quality of titanium alloy

Yazhou Feng, Huan Zheng, Xiaolan Han and Zhanfeng Liu
Advances in Mechanical Engineering 14 (8) 168781322211147 (2022)
https://doi.org/10.1177/16878132221114719

Centering deep hole drilling system with three oil films like centering rotating journal with oil films in bearing

Daguo Yu and Ming Zhao
Industrial Lubrication and Tribology 73 (6) 993 (2021)
https://doi.org/10.1108/ILT-02-2021-0043

Modeling and experimental investigation of drilling force for low-frequency axial vibration-assisted BTA deep hole drilling

Xubo Li, Jianming Zheng, Yan Li, et al.
The International Journal of Advanced Manufacturing Technology 111 (5-6) 1721 (2020)
https://doi.org/10.1007/s00170-020-06162-4

Experimental analysis of the BTA deep drilling and a new analytical thermomechanical model for assessment of cutting forces and BTA drill design

B. Haddag, M. Nouari and A. Moufki
The International Journal of Advanced Manufacturing Technology 106 (1-2) 455 (2020)
https://doi.org/10.1007/s00170-019-04562-9

Experimental study on the low-feed grooving process with different grooving tools

Jialu Xu, Fuzeng Wang, Feng Jiang, et al.
The International Journal of Advanced Manufacturing Technology 107 (11-12) 4755 (2020)
https://doi.org/10.1007/s00170-020-05338-2

A review of the chip breaking methods for continuous chips in turning

Bahattin Yılmaz, Şener Karabulut and Abdulkadir Güllü
Journal of Manufacturing Processes 49 50 (2020)
https://doi.org/10.1016/j.jmapro.2019.10.026

Research on Super-long Deep Hole Drilling Technology Based on 0Cr17Ni4Cu4Nb Stainless Steel

Xiaolan Han and Zhanfeng Liu
IOP Conference Series: Materials Science and Engineering 490 052005 (2019)
https://doi.org/10.1088/1757-899X/490/5/052005

Investigation of Chip Deformation and Breaking with a Staggered Teeth BTA Tool in Deep Hole Drilling

Xu-Bo Li, Jian-Ming Zheng, Yan Li, et al.
Metals 9 (1) 46 (2019)
https://doi.org/10.3390/met9010046

On the self-excitation of vibrations of a boring bar in the process of deep boring

A. Leonid Igumnov, S. Vladimir Metrikin, K. Aleksandr Lyubimov, F. Viktor Ovchinnikov and V. Aleksandra Grezina
Journal of Vibroengineering 20 (5) 2001 (2018)
https://doi.org/10.21595/jve.2017.18487

Modeling and Distribution Laws of Drilling Force for Staggered Teeth BTA Deep Hole Drill

Xubo Li, Jianming Zheng, Yan Li, et al.
Mathematical Problems in Engineering 2018 1 (2018)
https://doi.org/10.1155/2018/3691468

The guide block structure design of boring and trepanning association (BTA) deep hole drilling

Shucai Yang, Xin Tong, Xuqing Ma, et al.
The International Journal of Advanced Manufacturing Technology 99 (1-4) 911 (2018)
https://doi.org/10.1007/s00170-018-2418-7

Deep hole drill with positive taper and principle for elimination of drill deviation using cutting fluid

DaGuo Yu
The International Journal of Advanced Manufacturing Technology 89 (9-12) 3195 (2017)
https://doi.org/10.1007/s00170-016-9269-x

Analysis of the Chip Geometry in Dry Machining of Aeronautical Aluminum Alloys

Francisco Vilches, Lorenzo Hurtado, Francisco Fernández and Carolina Gamboa
Applied Sciences 7 (2) 132 (2017)
https://doi.org/10.3390/app7020132

Guidance principle of deep-hole cutting tools based on fluid wedge effect

Daguo Yu, Rongtao Zhang and Ruixuan Li
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231 (14) 2585 (2017)
https://doi.org/10.1177/0954405417713236

Self-centering positioner and principle for locating and guiding deep-hole drills using oil films

DaGuo Yu
The International Journal of Advanced Manufacturing Technology 92 (1-4) 639 (2017)
https://doi.org/10.1007/s00170-017-0185-5

Roundness Error in Deep Hole Drilling using Twist Drills and Cold Mold Steel 718

Farhad Najarian, Noordin Mohd Yusof, Noorfa Haszlinna Mustaffa, Azlan Mohd Zain and Anis Farhan Kamaruzaman
Indian Journal of Science and Technology 10 (17) 1 (2017)
https://doi.org/10.17485/ijst/2017/v10i17/113011

Hole machining based on using an incisive built-up reamer

Nikolay Dudak, Aizhan Taskarina, Asylbek Kasenov, et al.
International Journal of Precision Engineering and Manufacturing 18 (10) 1425 (2017)
https://doi.org/10.1007/s12541-017-0170-9