Experimental force measurements in single point incremental sheet forming SPIF
Mechanics & Industry, 16 4 (2015) 410
Published online: 2015-06-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Experimental Investigation and Optimization of Forming Parameters in Single Point Incremental Forming of AZ31 Magnesium Alloy
Dharmin M Patel and Anishkumar H GandhiInternational Journal of Experimental Research and Review 46 240 (2024)
https://doi.org/10.52756/ijerr.2024.v46.019
Single-point incremental formability of Monel 400: Coupled grey relational and principal component analyses
Selvaraj Sathiyaseelan, Ramanathan Kalimuthu, Chinnaiyan Sathiya Narayanan and Arasappan Rajesh KannanProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024)
https://doi.org/10.1177/09544089241288936
Numerical investigation of incremental forming process of AISI 304 stainless steel
Kamel Bensaid, Ridha Souissi, Atef Boulila, Mahfoudh Ayadi and Nabil Ben FredjIronmaking & Steelmaking 50 (2) 174 (2023)
https://doi.org/10.1080/03019233.2022.2099695
Optimization of Forming Parameters in Incremental Sheet Forming of AA3003-H18 Sheets Using Taguchi Method
Mohanraj Murugesan, Jae-Hyeong Yu, Kyu-Seok Jung, Sung-Min Cho, Krishna Singh Bhandari and Chang-Whan LeeMaterials 15 (4) 1458 (2022)
https://doi.org/10.3390/ma15041458
Feasibility Study of the SPIF Process Applied to Perforated Sheet Metals
Slim Bouzidi, Mahfoudh Ayadi and Atef BoulilaArabian Journal for Science and Engineering 47 (7) 9225 (2022)
https://doi.org/10.1007/s13369-022-06570-6
A position-adjustable universal backing plate to improve geometric accuracy in incremental sheet forming
Song Wu, Ninshu Ma, Sherif Rashed, et al.The International Journal of Advanced Manufacturing Technology 121 (11-12) 8143 (2022)
https://doi.org/10.1007/s00170-022-09921-7
Accuracy and Sheet Thinning Improvement of Deep Titanium Alloy Part with Warm Incremental Sheet-Forming Process
Badreddine Saidi, Laurence Giraud Moreau, Abel Cherouat and Rachid NasriJournal of Manufacturing and Materials Processing 5 (4) 122 (2021)
https://doi.org/10.3390/jmmp5040122
Formability and Failure Evaluation of AA3003-H18 Sheets in Single-Point Incremental Forming Process through the Design of Experiments
Mohanraj Murugesan and Dong Won JungMaterials 14 (4) 808 (2021)
https://doi.org/10.3390/ma14040808
Effect of hardening law and process parameters on finite element simulation of single point incremental forming (SPIF) of 7075 aluminum alloy sheet
Rasoul Esmaeilpour, Hyunki Kim, Taejoon Park, et al.Mechanics & Industry 21 (3) 302 (2020)
https://doi.org/10.1051/meca/2020019
Hot incremental forming of titanium human skull prosthesis by using cartridge heaters: a reverse engineering approach
Badreddine Saidi, Laurence Giraud Moreau, Samir Mhemed, et al.The International Journal of Advanced Manufacturing Technology 101 (1-4) 873 (2019)
https://doi.org/10.1007/s00170-018-2975-9
Robot-assisted incremental sheet metal forming under the different forming condition
Swagatika Mohanty, Srinivasa Prakash Regalla and Y. V. Daseswara RaoJournal of the Brazilian Society of Mechanical Sciences and Engineering 41 (2) (2019)
https://doi.org/10.1007/s40430-019-1581-6
Experimental Study On Force Measurement For AA 1100 Sheets Formed By Incremental Forming
Praveen kumar G and Kurra SureshMaterials Today: Proceedings 18 2738 (2019)
https://doi.org/10.1016/j.matpr.2019.07.137
Design and Modeling of Mechanical Systems—III
Badreddine Saidi, Laurence Giraud-Moreau, Atef Boulila, Abel Cherouat and Rachid NasriLecture Notes in Mechanical Engineering, Design and Modeling of Mechanical Systems—III 835 (2018)
https://doi.org/10.1007/978-3-319-66697-6_81
Experimental study and FEM analysis of forward hot dieless spinning
Mohammad Sedighi, Iraj Jalili and Mehdi Kasaeian-NaeiniMechanics & Industry 19 (4) 404 (2018)
https://doi.org/10.1051/meca/2018034
Investigation of sheet bending parameters on springback in nickel coated mild steel sheets using response surface methodology
D. Pritima and P. PadmanabhanMechanics & Industry 19 (2) 206 (2018)
https://doi.org/10.1051/meca/2018009
Effect of generatrix profile on single-point incremental forming parameters
Mariem Dakhli, Atef Boulila and Zoubeir TourkiThe International Journal of Advanced Manufacturing Technology 93 (5-8) 2505 (2017)
https://doi.org/10.1007/s00170-017-0598-1
Experimental and numerical study on optimization of the single point incremental forming of AINSI 304L stainless steel sheet
B. Saidi, L. Giraud-Moreau, A. Cherouat and R. NasriJournal of Physics: Conference Series 896 012039 (2017)
https://doi.org/10.1088/1742-6596/896/1/012039
Optimization of the single point incremental forming process for titanium sheets by using response surface
Badreddine Saidi, Laurence Giraud-Moreau, Abel Cherouat and K. SaanouniMATEC Web of Conferences 80 10011 (2016)
https://doi.org/10.1051/matecconf/20168010011