Open Access
| Issue |
Mechanics & Industry
Volume 16, Number 4, 2015
|
|
|---|---|---|
| Article Number | 410 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/meca/2015018 | |
| Published online | 15 June 2015 | |
- E. Leszek, Apparatus and process for incremental dieless forming, 1967 [Google Scholar]
- B. Saidi, Prédictions des efforts de formage incrémental à un point SPIF, École supérieure des sciences et technique de Tunis, Tunis, 2013 [Google Scholar]
- J. Jeswiet, Metal forming progress since 2000, CIRP J. Manuf. Sci. Technol. 12008 (2008) 2–17 [Google Scholar]
- L. Filice, On-Line Control of Single Point Incremental Forming Operations through Punch Force Monitoring, 2006 [Google Scholar]
- J. Duflou, Experimental study on force measurements for single point incremental forming, J. Mater. Process. Technol. 1189 (2007) 65–72 [CrossRef] [Google Scholar]
- J.R. Duflou, Twist revisited: Twist phenomena in single point incremental forming, CIRP Ann. Manuf. Technol. 159 (2010) 307–310 [CrossRef] [Google Scholar]
- J.J. Park, Incremental forming of free surface with magnesium alloy AZ31 sheet at warm temperatures, Trans. Nonferrous Metal Soc. China 118 (2008) 165–169 [Google Scholar]
- M. Durante, Comparison between analytical and experimental roughness values of components created by incremental forming, J. Mater. Process. Technol. 1210 (2010) 1934–1941 [CrossRef] [Google Scholar]
- G. Ambrogio, Influence of some relevant process parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation, J. Mater. Process. Technol. 1153–154 (2004) 501–507 [Google Scholar]
- C. Robert, Contribution a la simulation numérique des procédés de mise en forme, application au formage incremental et au formage superplastique, École doctorale No. 432: Sciences des Métiers de l’Ingénieur, France, 2009 [Google Scholar]
- N. Decultot, Formage incrémental de tôle d’aluminium: étude du procédé`a l’aide de la mesure de champs et identification de modèles de comportement, Université Paul Sabatier, Toulouse 3, France, 2009 [Google Scholar]
- R. Aerens, Force prediction for single point incremental forming deduced from experimental and FEM observations Int. J. Adv. Manuf. Technol. (2009) [Google Scholar]
- Y. Kim, Effect of process parameters on formability in incremental forming of sheet metal, J. Mater. Process. Technol. 130–131 (2002) 42–46 [CrossRef] [Google Scholar]
- L. Fratini, Influence of mechanical properties of the sheet material on formability in single point incremental forming, 2002 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.