Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Comparative Analysis of Cutting Forces in CNC Milling of MDF: The Role of Tool Coatings, Cutting Speed, and Feed Per Tooth

Luďka Hanincová, Jiří Procházka and Vít Novák
Coatings 14 (9) 1085 (2024)
https://doi.org/10.3390/coatings14091085

Investigation of the Corrosion and Tribological Properties of WC-Co Tools Hardened with PVD Coatings in Solid Oak Wood Processing

Deividas Kazlauskas, Vytenis Jankauskas and Maksim Antonov
Coatings 14 (5) 569 (2024)
https://doi.org/10.3390/coatings14050569

Correlating the Characterization and Machining Performance of Advanced PVD Coatings for Dry Turning

Gaurav D. Sonawane, Radhey Bachhav and Avani Barnwal
JOM 76 (1) 313 (2024)
https://doi.org/10.1007/s11837-023-05991-4

Structure and Properties of TiN–Cu Composite Coatings on T15K6 Alloy Obtained by Vacuum-Arc Evaporation and Magnetron Sputtering

D. B.-D. Tsyrenov, A. P. Semenov, I. A. Semenova and N. S. Ulahanov
Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques 18 (5) 1118 (2024)
https://doi.org/10.1134/S1027451024700915

Comparative Investigations of Tool Wear and Cutting Force for Wet and Dry Turning of Super Duplex Stainless Steels 2507

Gaurav Dinkar Sonawane and Radhey Bachhav
SAE International Journal of Materials and Manufacturing 18 (2) (2024)
https://doi.org/10.4271/05-18-02-0012

Machinability investigation of Chromoly steel using TiN/Al2O3/TiCN/TiOCN multilayer coated tungsten carbide tool inserts with artificial neural network methodology

Nikhil Singh, A. Bharatish, G. R. Rajkumar and G. Satheesh Babu
Applied Research 2 (4) (2023)
https://doi.org/10.1002/appl.202200082

Wear performance under dry and lubricated conditions of duplex treatment TiN/TiCrN coatings deposited with different numbers of CrN interlayers on steel substrates

Seda Ataş Bakdemir, Doğuş Özkan, Cenk Türküz and Serdar Salman
Wear 526-527 204931 (2023)
https://doi.org/10.1016/j.wear.2023.204931

Performance evaluation of HiPIMS, S3p and CAE deposited coatings during dry turning of Dss2205

Gaurav D. Sonawane and Vikas G. Sargade
Machining Science and Technology 26 (3) 396 (2022)
https://doi.org/10.1080/10910344.2022.2129981

Improving the Efficiency of Cutting Tools through Application of Filtered Cathodic Vacuum Arc Deposition Coating Techniques: A Review

Hailu Gemechu Benti, Abraham Debebe Woldeyohannes, Belete Sirahbizu Yigezu and Yuanshi Li
Advances in Materials Science and Engineering 2022 1 (2022)
https://doi.org/10.1155/2022/1450805

Structure and Properties of High-Entropy Nitride Coatings

Vseslav Novikov, Nikita Stepanov, Sergey Zherebtsov and Gennady Salishchev
Metals 12 (5) 847 (2022)
https://doi.org/10.3390/met12050847

Advantages of cryogenic machining technique over without-coolant and with-coolant machining on SS316

M C Karthik Rao, Rashmi L Malghan, Arun Kumar Shettigar, Mervin A Herbert and Shrikantha S Rao
Engineering Research Express 3 (1) 015040 (2021)
https://doi.org/10.1088/2631-8695/abecd6

Experimental research on micro-cutting wear of 38CrSi steel caused by TiAlN- and TiCrAlN-coated tools

Yanjun Hou, Wentian Shi, Qiangqiang Li, Yude Liu and Guoliang Han
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235 (3) 653 (2021)
https://doi.org/10.1177/1350650120920504

Investigations on silicon nitride superimposed nanocoated cutting tool by physical vapour deposition and atomic force microscopy

S. Nallusamy
Applied Nanoscience 11 (4) 1107 (2021)
https://doi.org/10.1007/s13204-021-01668-z

Influence of Ag alloying on the morphology, structure, mechanical properties, thermal stability and oxidation resistance of multilayered TiSiN/Ti(Ag)N films

A. AL-Rjoub, A. Cavaleiro and F. Fernandes
Materials & Design 192 108703 (2020)
https://doi.org/10.1016/j.matdes.2020.108703

Influence of ultrasonic burnishing on the durability of the burnisher

Sergey Grigoriev, Aleksandr Selivanov, Nikolai Bobrovskij, Aleksandr Dyakonov and Petr Mazein
IOP Conference Series: Materials Science and Engineering 450 032031 (2018)
https://doi.org/10.1088/1757-899X/450/3/032031