Issue |
Mechanics & Industry
Volume 18, Number 7, 2017
STANKIN: Innovative manufacturing methods, measurements and materials
|
|
---|---|---|
Article Number | 706 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/meca/2017063 | |
Published online | 30 December 2017 |
- V.P. Tabakov, Formirovaniye iznosostoykikh ionno-plazmennykh pokrytiy rezhushchego instrumenta, Mashinostroyeniye, Moscow, 2008 (in Russian) [Google Scholar]
- A.S. Vereschaka, Working capacity of the cutting tool with wear resistant coatings, Mashinostroenie, Moscow, 1993 (in Russian) [Google Scholar]
- B.D. Beake, G.S. Fox-Rabinovich, Progress in high temperature nanomechanical testing of coatings for optimizing their performance in high speed machining, Surf. Coat. Technol. 255 (2014) 102–111 [CrossRef] [Google Scholar]
- M.G. Faga, G. Gautier, R. Calzavarini, M. Perucca, E. Aimo Boot, F. Cartasegna, L. Settineri, AlSiTiN nanocomposite coatings developed via Arc Cathodic PVD: evaluation of wear resistance via tribological analysis and high speed machining operations, Wear 263 (2007) 1306–1314 [CrossRef] [Google Scholar]
- G. Skordaris, K.-D. Bouzakis, T. Kotsanis, P. Charalampous, E. Bouzakis, O. Lemmer, S. Bolz, Film thickness effect on mechanical properties and milling performance of nano-structured multilayer PVD coated tools, Surf. Coat. Technol. 307 (2016) 452–460 [CrossRef] [Google Scholar]
- M. Tkadletz, N. Schalk, R. Daniel, J. Keckes, C. Czettl, C. Mitterer, Advanced characterization methods for wear resistant hard coatings: a review on recent progress, Surf. Coat. Technol. 285 (2016) 31–46, DOI:10.1016/j.surfcoat.2015.11.016 [Google Scholar]
- A.A. Vereshchaka, A.S. Vereshchaka, O. Mgaloblishvili, M.N. Morgan, A.D. Batako, Nano-scale multilayered-composite coatings for the cutting tools, Int. J. Adv. Manuf. Technol. 72 (2014) 303–317 [CrossRef] [Google Scholar]
- A.А. Vereschaka, M.A. Volosova, A.D. Batako, A.S. Vereshchaka, B.Y. Mokritskii, Development of wear-resistant coatings compounds for high-speed steel tool using a combined cathodic vacuum arc deposition, Int. J. Adv. Manuf. Technol. 84 (2016) 1471–1482, DOI:10.1007/s00170-015-7808-5 [Google Scholar]
- A.O. Volkhonskii, A.A. Vereshchaka, I.V. Blinkov, A.S. Vereshchaka, A.D. Batako, Filtered cathodic vacuum Arc deposition of nano-layered composite coatings for machining hard-to-cut materials, Int. J. Adv. Manuf. Technol. 84 (2016) 1647–1660, DOI:10.1007/s00170-015-7821-8 [Google Scholar]
- A.A. Vereschaka, A.S. Vereschaka, A.D. Batako, O. Kh. Hojaev, B.Y. Mokritskii, Development and research of nanostructured multilayer composite coatings for tungsten-free carbides with extended area of technological applications, Int. J. Adv. Manuf. Technol. 87 (2016) 3449–3457, DOI:10.1007/s00170-016-8739-5 [CrossRef] [Google Scholar]
- G.S. Fox-Rabinovich, A.I. Kovalev, M.H. Aguirre, B.D. Beake, K. Yamamoto, S.C. Veldhuis, J.L. Endrino, D.L. Wainstein, A.Y. Rashkovskiy, Design and performance of AlTiN and TiAlCrN PVD coatings for machining of hard to cut materials, Surf. Coat. Technol 204 (2009) 489–496, DOI:10.1016/j.surfcoat.2009.08.021 [CrossRef] [Google Scholar]
- Q. Yang, R. McKellar, Nanolayered CrAlTiN and multilayered CrAlTiN-AlTiN coatings for solid particle erosion protection, Tribol. Int. 83 (2015) 12–20, DOI:10.1016/j.triboint.2014.11.002 [Google Scholar]
- S. Koseki, K. Inoueb, H. Usuki, Damage of physical vapor deposition coatings of cutting tools during alloy 718 turning, Precis. Eng. 44 (2016) 41–54 [Google Scholar]
- L. Lu, Q.M. Wang, B.Z. Chen, Y.C. Ao, D.H. Yu, C.Y. Wang, S.H. Wu, K.H. Kim, Microstructure and cutting performance of CrTiAlN coating for high-speed dry milling, Trans. Nonferrous Met. Soc. China 24 (2014) 1800–1806, DOI:10.1016/S1003-6326(14)63256-8 [CrossRef] [Google Scholar]
- J.L. Endrino, G.S. Fox-Rabinovich, C. Gey, Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel, Surf. Coat. Technol. 200 (2006) 6840–6845, DOI:10.1016/j.surfcoat.2005.10.030 [CrossRef] [Google Scholar]
- A.S. Vereschaka, A.A. Vereschaka, D.V. Sladkov, A.Yu. Aksenenko, N.N. Sitnikov, Control of structure and properties of nanostructured multilayer composite coatings applied to cutting tools as a way to improve efficiency of technological cutting operation, J. Nano Res. 37 (2016) 51–57, DOI:10.4028/www.scientific.net/JNanoR.37.51 [CrossRef] [Google Scholar]
- L. Chen, Y. Du, P.H. Mayrhofer, S.Q. Wang, J. Li, The influence of age-hardening on turning and milling performance of Ti–Al–N coated inserts, Surf. Coat. Technol. 202 (2008) 5158–5161, DOI:10.1016/j.surfcoat.2008.05.036 [CrossRef] [Google Scholar]
- K. Yamamoto, T. Sato, K. Takahara, K. Hanaguri, Properties of (Ti, Cr, Al)N coatings with high Al content deposited by new plasma enhanced arc-cathode, Surf. Coat. Technol. 174–175 (2003) 620–626, DOI:10.1016/S0257-8972(03)00580-2 [CrossRef] [Google Scholar]
- S. Veprek, M.J.G. Veprek-Heijman, Industrial applications of superhard nanocomposite coatings, Surf. Coat. Technol. 202 (2008) 5063–5073, DOI:10.1016/j.surfcoat.2008.05.038 [CrossRef] [Google Scholar]
- G.S. Fox-Rabinovich, K. Yamamoto, A.I. Kovalev, S.C. Veldhuis, L. Ning, L.S. Shuster, A. Elfizy, Wear behavior of adaptive nano-multilayered TiAlCrN/NbN coatings under dry high performance machining conditions, Surf. Coat. Technol. 202 (2008) 2015–2022, DOI:10.1016/j.surfcoat.2007.08.067 [CrossRef] [Google Scholar]
- M.G. Faga, G. Gautier, R. Calzavarini, M. Perucca, E. Aimo Boot, F. Cartasegna, L. Settineri, AlSiTiN nanocomposite coatings developed via Arc Cathodic PVD: evaluation of wear resistance via tribological analysis and high speed machining operations, Wear 263 (2007) 1306–1314 [CrossRef] [Google Scholar]
- L. Ning, S.C. Veldhuis, K. Yamamoto, Investigation of wear behavior and chip formation for cutting tools with nano-multilayered TiAlCrN/NbN PVD coating, Int. J. Mach. Tools Manuf. 48 (2008) 656–665, DOI:10.1016/j.ijmachtools.2007.10.021 [CrossRef] [Google Scholar]
- K. Yamamoto, S. Kujime, K. Takahara, Properties of nano-multilayered hard coatings deposited by a new hybrid coating process: combined cathodic arc and unbalanced magnetron sputtering, Surf. Coat. Technol. 200 (2005) 435–439, DOI:10.1016/j.surfcoat.2005.02.175 [CrossRef] [Google Scholar]
- S. Yang, E. Wiemann, D. Teer, The properties and performance of Cr-based multilayer nitride hard coatings using unbalanced magnetron sputtering and elemental metal targets, Surf. Coat. Technol. 188 (2004) 662–668, DOI: 10.1016/j.surfcoat.2007.08.067 [CrossRef] [Google Scholar]
- H. Ezuraa, K. Ichijoa, H. Hasegawab, K. Yamamotoc, A. Hottaa, T. Suzukia, Micro-hardness, microstructures and thermal stability of (Ti, Cr, Al, Si)N films deposited by cathodic arc method, Vacuum 82 (2008) 476–481 [CrossRef] [Google Scholar]
- C.-H. Lai, K.-H. Cheng, S.-J. Lin, J.-W. Yeh, Mechanical and tribological properties of multi-element (AlCrTaTiZr) N coatings, Surf. Coat. Technol. 202 (2008) 3732–3738 [CrossRef] [Google Scholar]
- V.P. Tabakov, The influence of machining condition forming multilayer coatings for cutting tools, Key Eng. Mater. 496 (2012) 80–85 [CrossRef] [Google Scholar]
- V.P. Tabakov, A.S. Vereschака, Development of technological means for formation of multilayer composite coatings, providing increased wear resistance of carbide tools, for different machining condition, Key Eng. Mater. 581 (2014) 55–61 [CrossRef] [Google Scholar]
- A.S. Vereschaka, S.N. Grigoriev, V.P. Tabakov, E.S. Sotova, A.A. Vereschaka, M.Yu. Kulikov, Improving the efficiency of the cutting tool made of ceramic when machining hardened steel by applying nano-dispersed multi-layered coatings, Key Eng. Mater. 581 (2014) 68–73 [CrossRef] [Google Scholar]
- F. Klocke, K.-D. Bouzakis, K. Georgiadis, S. Gerardis, G. Skordaris, M. Pappa, Adhesive interlayers' effect on the entire structure strength of glass molding tools' Pt-Ir coatings by nano-tests determined, Surf. Coat. Technol. 206 (2011) 1867–1872 [CrossRef] [Google Scholar]
- A.A. Vereschaka, S.N. Grigoriev, Study of cracking mechanisms in multi-layered composite nano-structured coatings, Wear 378–379 (2017) 43–57, DOI:10.1016/j.wear.2017.01.101 [Google Scholar]
- Z.G. Zhang, O. Rapaud, N. Allain, D. Mercs, M. Baraket, C. Dong, C. Coddet, Microstructures and tribological properties of CrN/ZrN nanoscale multilayer coatings, Appl. Surf. Sci. 255 (2009) 4020. [CrossRef] [Google Scholar]
- A.A. Vereschaka, M.A. Volosova, A. Batako, A.S. Vereschaka, N.N. Sitnikov, A.E. Seleznev, Nano-scale multi-layered coatings for improved efficiency of ceramic cutting tools, Int. J. Adv. Manuf. Technol. (2017) 27–43, DOI:10.1007/s00170-016-9353-2 [Google Scholar]
- A.A. Vereschaka, S.N. Grigoriev, N.N. Sitnikov, A. Batako, Delamination and longitudinal cracking in multi-layered composite nano-structured coatings and their influence on cutting tool life, Wear 390–391 (2017) 209–219, DOI:10.1016/j.wear.2017.07.021 [CrossRef] [Google Scholar]
- A.A. Vereschaka, A.S. Vereschaka, J.I. Bublikov, A.Y. Aksenenko, N.N. Sitnikov, Study of properties of nanostructured multilayer composite coatings of Ti-TiN-(TiCrAl)N and Zr-ZrN-(ZrNbCrAl)N, J. Nano Res. 40 (2016) 90–98, DOI:10.4028/www.scientific.net/JNanoR.40.90 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.