Influence of tool pin and shoulder geometries on microstructure of friction stir processed AA6063/SiC composites
Mechanics & Industry, 19 2 (2018) 211
Published online: 2018-09-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Dynamic recrystallization during solid state friction stir welding/processing/additive manufacturing: Mechanisms, microstructure evolution, characterization, modeling techniques and challenges
Anoop Singh, Satish Kumar Sharma and Ajay BatishCritical Reviews in Solid State and Materials Sciences 50 (1) 77 (2025)
https://doi.org/10.1080/10408436.2024.2391333
Experimental study of the effects of pin geometry, advancing speed and D/d ratio on the mechanical and microstructural properties of 6061 aluminum alloy under the friction stir processing
Ali Alavi Nia and Reza AmirifarJournal of Advanced Joining Processes 9 100205 (2024)
https://doi.org/10.1016/j.jajp.2024.100205
Development and Characterization of a Novel AA6061 Composite Reinforced with Titanium Aluminide via Friction Stir Processing
Ilyas Hussain and R.J. ImmanuelJournal of Alloys and Compounds 176317 (2024)
https://doi.org/10.1016/j.jallcom.2024.176317
FABRICATION AND CHARACTERIZATION OF AA6082-T6 PRODUCED BY FRICTION STIR ADDITIVE MANUFACTURING
BHUPENDER SINGH, SUKHVIR YADAV, ASHOK KUMAR YADAV, ABHIJIT SAHA, DHARAMVEER SINGH and UMAKANTA CHOUDHURYSurface Review and Letters (2024)
https://doi.org/10.1142/S0218625X25500222
Improving Mechanical and Tribological Characteristics of Cast Elektron 21 Alloy by Reinforcing its Surface with Al0.3Cu0.3Ni0.1Si0.1W0.2 High Entropy Alloy via Friction Stir Processing Route
R. Soundararajan, A. Sathishkumar, S. Sivasankaran and Abdullah AlhomidanInternational Journal of Metalcasting (2024)
https://doi.org/10.1007/s40962-024-01415-4
Influence of various tool shoulder design on hybrid surface composite of AA7075-T651/SiC/graphene through friction stir processing
Ankur Vasava and Dinesh SinghCanadian Metallurgical Quarterly 63 (2) 293 (2024)
https://doi.org/10.1080/00084433.2023.2193500
Influence of tool pin profiles on the mechanical and microstructural properties of a single-pass friction stir-welded AA7075-T6 aluminium alloy
Rakesh kumar, Brijesh Kumar Yadav, Shailendra Singh Bhadauria and Varun SharmaCanadian Metallurgical Quarterly 1 (2024)
https://doi.org/10.1080/00084433.2024.2358264
Synthesis of High Entropy Alloy for Surface Modification by Friction Stir Process: Recent Advances and Future Directions
S. Ragunath, N. Radhika, S. Aravind Krishna and N. JeyaprakashMetals and Materials International 30 (5) 1170 (2024)
https://doi.org/10.1007/s12540-023-01584-7
Investigating nano-SiC reinforced WE43 magnesium matrix surface composites
Amardeep Singh Kang, Ravinder Pal Singh and Shivali SinglaEngineering Research Express 6 (2) 025409 (2024)
https://doi.org/10.1088/2631-8695/ad4196
Optimization of friction stir processing parameters for improving structural and mechanical properties in in situ AA5083-H111/Al–Fe composites
Varun Singhal, Vivek Kumar Jain, Ravi Shankar Raman, Dinesh Patharia, Vikas Mittal, Subhash Mishra and Hitesh KumarProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 238 (10) 4477 (2024)
https://doi.org/10.1177/09544062231211672
Fabrication of surface composites on different aluminium alloys via friction stir process - A review report
Vivek Kumar Jain, Manoj Kumar Yadav, Arshad Noor Siddiquee and Zahid A. KhanAustralian Journal of Mechanical Engineering 21 (5) 1489 (2023)
https://doi.org/10.1080/14484846.2021.2022577
Development of WE43/TiC surface composites using friction stir processing: A parametric study
Amardeep Singh Kang, Ravinder Pal Singh and Shivali SinglaMaterials Science and Technology 39 (16) 2577 (2023)
https://doi.org/10.1080/02670836.2023.2211470
Understanding the effect of particle reinforcement on friction stir weldment: A review
ShivaKumar G N and Rajamurugan GProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237 (6) 1231 (2023)
https://doi.org/10.1177/14644207221140246
Effect of tool pin profiles on the properties of foamable precursor developed by friction stir processing
Mandeep Kumar, Ratnesh Kumar Raj Singh and Vivek JainProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237 (4) 1367 (2023)
https://doi.org/10.1177/09544089221113562
Machining and mechanical characterization of friction stir processed (FSP) surface hybrid composites (AA8014 + TiB2 + ZrO2)
Sathish Thanikodi, Antony Sagai Francis Britto, Vinjamuri Sree Naga Chidambara Dattu, Sami Al Obaid, Saleh Alfarraj and Md Abul KalamThe International Journal of Advanced Manufacturing Technology (2023)
https://doi.org/10.1007/s00170-023-12198-z
Fabrication and Characterization of Magnesium-Based WE43/TiC Nanocomposite Material Developed Via Friction Stir Processing and Study of Significant Parameters
Prem Sagar, Shivali Singla and Amit HandaJournal of Engineering Materials and Technology 145 (3) (2023)
https://doi.org/10.1115/1.4062321
Microstructural investigation on friction stir welded AA6063 pipe
Jitendra Yadav, Prashant Choudhary, Nitish Yadav, et al.Materials Today: Proceedings 62 331 (2022)
https://doi.org/10.1016/j.matpr.2022.03.378
Parametric studies of friction stir welding with tool using a vibrating shoulder
Mohamed Serier, Sheymaa Alazzawi, Amina Chikh, et al.Materials Today: Proceedings 62 70 (2022)
https://doi.org/10.1016/j.matpr.2022.02.136
Study on surface modification and fabrication of surface composites of magnesium alloys by friction stir processing: a review
Suhail Ahmed Manroo, Noor Zaman Khan and Babar AhmadJournal of Engineering and Applied Science 69 (1) (2022)
https://doi.org/10.1186/s44147-022-00073-9
The study of mechanical and metallographic properties of friction stir processed AMMCs using different reinforcement
Manoj Kumar Yadav, Bhavye Prakash, Jyoti Swaroop Sharma, Rishabh Aggarwal and Aniruddha KumarMaterials Today: Proceedings 62 283 (2022)
https://doi.org/10.1016/j.matpr.2022.03.260
Surface moderation and composite fabrication of die-cast magnesium alloys via friction stir processing: a review
Suhail Ahmed, Manroo, Vinayak Malik and Babar AhmadAdvances in Materials and Processing Technologies 8 (4) 3635 (2022)
https://doi.org/10.1080/2374068X.2021.1970998
Thermal Modeling of Tool-Work Interface during Friction Stir Welding Process
A. Chikh, M. Serier, R. Al-Sabur, A. N. Siddiquee and N. GangilRussian Journal of Non-Ferrous Metals 63 (6) 690 (2022)
https://doi.org/10.3103/S1067821222060049
Handbook of Polymer and Ceramic Nanotechnology
Namrata Gangil, Arshad Noor Siddiquee and Sachin MaheshwariHandbook of Polymer and Ceramic Nanotechnology 1 (2021)
https://doi.org/10.1007/978-3-030-10614-0_68-1
Handbook of Polymer and Ceramic Nanotechnology
Namrata Gangil, Arshad Noor Siddiquee and Sachin MaheshwariHandbook of Polymer and Ceramic Nanotechnology 639 (2021)
https://doi.org/10.1007/978-3-030-40513-7_68
Optimization of friction stir processing parameters for enhanced microhardness of AA5083/Al-Fe in-situ composites via Taguchi technique
Vivek Kumar Jain, Manoj Kumar Yadav, Arshad Noor Siddiquee and Zahid A. KhanMaterial Science, Engineering and Applications 1 (2) 55 (2021)
https://doi.org/10.21595/msea.2021.22179
Effect of tool rotational speed on microstructure and mechanical properties of friction stir processed AA5083/Fe-Al in-situ composite
Vivek Kumar Jain, Manoj Kumar Yadav, Abhishek Saxena, Arshad Noor Siddiquee and Zahid A. KhanMaterials Today: Proceedings 46 6496 (2021)
https://doi.org/10.1016/j.matpr.2021.03.683
Investigation on the in-process traverse force evolution during surface composites fabrication on Al-Zn-Mg-Cu alloy through friction stir processing
Namrata Gangil, Arshad Noor Siddiquee and Sachin MaheshwariMaterials Today: Proceedings 25 686 (2020)
https://doi.org/10.1016/j.matpr.2019.08.062
Effect of (Ti–B) modifier elements and FSP on 5052 aluminum alloy
Essam B. Moustafa and Ahmed O. MoslehJournal of Alloys and Compounds 823 153745 (2020)
https://doi.org/10.1016/j.jallcom.2020.153745
Effects of process parameters on tensile strength of friction stir welded Al-Cu double-layer sheets
Mohammad Taghizadeh Tabrizi, Amirhossein Jabbari Mostahsan and Mohammad SedighiMechanics & Industry 21 (5) 503 (2020)
https://doi.org/10.1051/meca/2020059
Effect of multi-pass friction stir processing on thermal distribution and mechanical properties of AZ91
Hoda Agha Amini Fashami, Nasrollah Bani Mostafa Arab, Mohammad Hoseinpour Gollo and Bahram NamiMechanics & Industry 21 (4) 411 (2020)
https://doi.org/10.1051/meca/2020042
Towards applications, processing and advancements in shape memory alloy and its composites
Namrata Gangil, Arshad Noor Siddiquee and Sachin MaheshwariJournal of Manufacturing Processes 59 205 (2020)
https://doi.org/10.1016/j.jmapro.2020.09.048
Fabrication of Magnesium–NiTip Composites via Friction Stir Processing: Effect of Tool Profile
N. Gangil, H. Nagar, S.M.A.K. Mohammed, D. Singh, A.N. Siddiquee, S. Maheshwari and D.L. ChenMetals 10 (11) 1425 (2020)
https://doi.org/10.3390/met10111425
Shape memory alloy reinforced magnesium matrix composite fabricated via friction stir processing
Namrata Gangil, Hitler Nagar, Rajeev Kumar and Devendra SinghMaterials Today: Proceedings 33 378 (2020)
https://doi.org/10.1016/j.matpr.2020.04.172
Experimental investigation into characterization and machining of Al + SiCp nano-composites using coated carbide tool
Pradyut Kumar Swain, Kasinath Das Mohapatra, Ratnakar Das, Ashok Kumar Sahoo and Amlana PandaMechanics & Industry 21 (3) 307 (2020)
https://doi.org/10.1051/meca/2020015
Investigation on friction stir welding of hybrid composites fabricated on Al–Zn–Mg–Cu alloy through friction stir processing
Namrata Gangil, Sachin Maheshwari, Arshad Noor Siddiquee, et al.Journal of Materials Research and Technology 8 (5) 3733 (2019)
https://doi.org/10.1016/j.jmrt.2019.06.033
Novel Use of Distribution Facilitators and Time–Temperature Range for Strengthening in Surface Composites on AA7050-T7451
Namrata Gangil, Sachin Maheshwari and Arshad Noor SiddiqueeMetallography, Microstructure, and Analysis 7 (5) 561 (2018)
https://doi.org/10.1007/s13632-018-0474-x
Another Approach to Characterize Particle Distribution during Surface Composite Fabrication Using Friction Stir Processing
Namrata Gangil, Sachin Maheshwari, Emad Abouel Nasr, Abdulaziz M. El-Tamimi, Mohammed A. El-Meligy and Arshad Noor SiddiqueeMetals 8 (8) 568 (2018)
https://doi.org/10.3390/met8080568