Optimization of machining parameters in turning of Inconel 718 Nickel-base super alloy
Mechanics & Industry, 21 2 (2020) 203
Published online: 2020-02-05
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Investigating the effect of optimal addition of Inconel 718 machining swarfs on the wear behavior of gray cast iron
Mehdi Ranjbar, Seyed Hossein Razavi, Zahra-Sadat Seyedraoufi and Yazdan ShajariJournal of Materials Research and Technology 35 2558 (2025)
https://doi.org/10.1016/j.jmrt.2025.01.199
Exploring the effectiveness of negative and positive inserts in machining Inconel 718 alloy: a comparative study
Łukasz Żyłka, Marcin Płodzień, Krzysztof Krupa, Luis Norberto López de Lacalle and Asier FernandezThe International Journal of Advanced Manufacturing Technology 136 (1) 79 (2025)
https://doi.org/10.1007/s00170-024-13696-4
Optimization of the tool wear and surface roughness in the high-speed dry turning of Inconel 800
Ganesha Prasad, G. S. Vijay, Raghavendra C. Kamath and Harshit Jairaj HemmadyCogent Engineering 11 (1) (2024)
https://doi.org/10.1080/23311916.2024.2308993
Cutting force and surface roughness evaluation of cryogenic treated inserts for machining en24 grade alloy steel: RSM modelling approach
Prem Chand R, T. V. Sreerama Reddy, Namdev Gawade, Atul Babbar, R. Ganapati, Chandrashekar Anjinappa, Raman Kumar, Ankit Sharma and Raman KumarInternational Journal on Interactive Design and Manufacturing (IJIDeM) 18 (6) 3923 (2024)
https://doi.org/10.1007/s12008-024-01889-w
Machining behavior investigation of aluminium metal matrix composite reinforced with TiC particulates
Ajay R. Bhardwaj, A. M. Vaidya, P. D. Meshram and Din BandhuInternational Journal on Interactive Design and Manufacturing (IJIDeM) 18 (5) 2911 (2024)
https://doi.org/10.1007/s12008-023-01378-6
Optimizing Power Consumption in Machining Nickel-Based Superalloys: Strategies for Energy Efficiency
Alper Başaran, Mahmut Özer and Hakan KazanSAE International Journal of Sustainable Transportation, Energy, Environment, & Policy 5 (3) (2024)
https://doi.org/10.4271/13-05-03-0017
Investigation on machining of GFRP through ANOVA, DFA, and CoCoSo method combined with Taguchi approach
Sabrina Haoues, Mohamed Athmane Yallese, Mounia Kaddeche, Alper Uysal and Khaoula SafiJournal of Reinforced Plastics and Composites (2024)
https://doi.org/10.1177/07316844241239249
Taguchi Deney Tasarımı ile Fiber Optik Kablo Üretimi Proses Optimizasyonu
İlker Karadağ, Sinan Dündar and Ömer Faruk GürcanFırat Üniversitesi Mühendislik Bilimleri Dergisi 36 (2) 743 (2024)
https://doi.org/10.35234/fumbd.1434003
Parametric Analysis of Tool Wear, Surface Roughness and Energy Consumption during Turning of Inconel 718 under Dry, Wet and MQL Conditions
M. Zeeshan Siddique, Muhammad Iftikhar Faraz, Shahid Ikramullah Butt, Rehan Khan, Jana Petru, Syed Husain Imran Jaffery, Muhammad Ali Khan and Abdul Malik TahirMachines 11 (11) 1008 (2023)
https://doi.org/10.3390/machines11111008
Pareto Analysis of Machining Factors Significance When Turning of Nickel-Based Superalloy Inconel 718
Oleksandr Yevdokymov, Vitalii Kolesnyk, Jozef Peterka, Tomas Vopat, Munish Kumar Gupta, Dmytro Lisovenko and Andrii DovhopolovMetals 13 (8) 1354 (2023)
https://doi.org/10.3390/met13081354
Prediction and optimization of surface roughness in high-speed dry milling of 30CrMnSiNiA using GPR and MOHHO algorithm
Lei Song, Chunping Yan, Gan Tu, Minghong Xiang and Yifan LiuThe International Journal of Advanced Manufacturing Technology 128 (9-10) 4357 (2023)
https://doi.org/10.1007/s00170-023-12167-6
Machining deformation control methods and analysis of a thin-walled gear spoke plate
Haixiang Huan, Ke Zhang, Jiuhua Xu, Wenqiang Xu and Mengxiong WangThe International Journal of Advanced Manufacturing Technology 127 (3-4) 1317 (2023)
https://doi.org/10.1007/s00170-023-11609-5
Influence of Flank Wear on the Microstructure Characteristics of the GH4169 Metamorphic Layer under High-Pressure Cooling
Min Wei, Mingyang Wu, Jiamiao Xu and Yaonan ChengMaterials 16 (8) 2944 (2023)
https://doi.org/10.3390/ma16082944
Optimization and Machinability Assessment at the Optimal Solutions Across Taguchi OA, GRA, and BBD: An Overall View
Hamid Tebassi, Mohamed Athmane Yallese and Salim BelhadiArabian Journal for Science and Engineering 48 (9) 12455 (2023)
https://doi.org/10.1007/s13369-023-07825-6
Prediction of EDMed micro-hole quality characteristics using hybrid bio-inspired machine learning-based predictive approaches
Thella Babu RaoInternational Journal on Interactive Design and Manufacturing (IJIDeM) 17 (2) 747 (2023)
https://doi.org/10.1007/s12008-022-01117-3
Evaluation of the cutting performance of PVD, CVD and MTCVD carbide inserts in dry turning of AISI 4140 steel using RSM-based NAMDE optimization
Billel Hamadi, Mohamed Athmane Yallese, Lakhdar Boulanouar, Abderazek Hammoudi and Mourad NouiouaJournal of the Brazilian Society of Mechanical Sciences and Engineering 44 (8) (2022)
https://doi.org/10.1007/s40430-022-03633-5
Application of MOORA & COPRAS integrated with entropy method for multi-criteria decision making in dry turning process of Nimonic C263
Munuswamy Krishna, Sathuvachari Devarajan Kumar, Chakaravarthy Ezilarasan, et al.Manufacturing Review 9 20 (2022)
https://doi.org/10.1051/mfreview/2022014
Optimization of surface roughness, tool wear and material removal rate in turning of Inconel 718 with ceramic composite tools using MCDM methods based on Taguchi methodology
H Boumaza, S Belhadi, M A Yallese, K Safi and A HaddadSādhanā 48 (1) (2022)
https://doi.org/10.1007/s12046-022-02060-5
Tool vibration, surface roughness, cutting power, and productivity assessment using RSM and GRA approach during machining of Inconel 718 with PVD-coated carbide tool
Ilyas Kouahla, Mohamed Athmane Yallese, Salim Belhadi, Khaoula Safi and Mourad NouiouaThe International Journal of Advanced Manufacturing Technology 122 (3-4) 1835 (2022)
https://doi.org/10.1007/s00170-022-09988-2
1 (2022)
https://doi.org/10.4271/2022-28-0526
Parametric study and multi-criteria optimization during turning of X210Cr12 steel using the desirability function and hybrid Taguchi-WASPAS method
Khaoula Safi, Mohamed Athmane Yallese, Salim Belhadi, Tarek Mabrouki and Salim ChihaouiProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236 (15) 8401 (2022)
https://doi.org/10.1177/09544062221086171
STUDY ON MULTI-OBJECTIVE OPTIMIZATION OF THE TURNING PROCESS OF EN 10503 STEEL BY COMBINATION OF TAGUCHI METHOD AND MOORA TECHNIQUE
Do Duc Trung, Nhu-Tung Nguyen and Duong Van DucEUREKA: Physics and Engineering (2) 52 (2021)
https://doi.org/10.21303/2461-4262.2020.001414
A three-dimensional finite element-approach to investigate the optimum cutting parameters in machining AA2024
Hassan Ijaz, Mohd Danish, Muhammad Asad and Saeed RubaieeMechanics & Industry 21 (6) 615 (2020)
https://doi.org/10.1051/meca/2020087
Identifying optimization methods using MQL and Cryo-treatments for turning inconel alloy with nanofluids
Sameer Bukane, Vasim A Shaikh and M VeeraBhadraRaoJournal of Physics: Conference Series 1706 (1) 012219 (2020)
https://doi.org/10.1088/1742-6596/1706/1/012219