Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Numerical model of a single stage gearbox under variable regime

Mohamed Habib Farhat, Taissir Hentati, Xavier Chiementin, et al.
Mechanics Based Design of Structures and Machines 51 (2) 1054 (2023)
https://doi.org/10.1080/15397734.2020.1863226

Automatic condition monitoring of electromechanical system based on MCSA, spectral kurtosis and SOM neural network

Zair Mohamed, Rahmoune Chemseddine, Benazzouz Djamel and Ratni Azeddine
Journal of Vibroengineering 21 (8) 2082 (2019)
https://doi.org/10.21595/jve.2019.20056

A new method to enhance of fault detection and diagnosis in gearbox systems

Azeddine Ratni, Chemseddine Rahmoune and Djamel Benazzouz
Journal of Vibroengineering 19 (1) 176 (2017)
https://doi.org/10.21595/jve.2016.17214

Application of the wavelets multiresolution analysis and the high-frequency resonance technique for gears and bearings faults diagnosis

Issam Moumene and Nouredine Ouelaa
The International Journal of Advanced Manufacturing Technology 83 (5-8) 1315 (2016)
https://doi.org/10.1007/s00170-015-7436-0

Design, modeling and dynamic simulation of three double stage gearboxes with different module, mesh stiffness fluctuation and different level tooth breakage

Jairo Alberto Ruiz-Botero, Juan Fernando López-López and Héctor Fabio Quintero-Riaza
Revista Facultad de Ingeniería Universidad de Antioquia (74) 117 (2015)
https://doi.org/10.17533/udea.redin.19112

Vibratory monitoring of gear transmissions in variable regime

M. Merzoug, K. A. Sghir, A. Miloudi and J. P. Dron
Mechanics & Industry 15 (5) 377 (2014)
https://doi.org/10.1051/meca/2014056

New Trends in Mechanism and Machine Science

M. Karray, F. Chaari, F. Viadero, A. Fdez. del Rincon and M. Haddar
Mechanisms and Machine Science, New Trends in Mechanism and Machine Science 7 337 (2013)
https://doi.org/10.1007/978-94-007-4902-3_36

Early detection of pitting failure in gears using a spectral kurtosis analysis

Chemseddine Rahmoune and Djamel Benazzouz
Mechanics & Industry 13 (4) 245 (2012)
https://doi.org/10.1051/meca/2012018

Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission

Fakher Chaari, Walid Baccar, Mohamed Slim Abbes and Mohamed Haddar
European Journal of Mechanics - A/Solids 27 (4) 691 (2008)
https://doi.org/10.1016/j.euromechsol.2007.11.005

Dynamic analysis of a planetary gear failure caused by tooth pitting and cracking

F. Chaari, T. Fakhfakh and M. Haddar
Journal of Failure Analysis and Prevention 6 (2) 73 (2006)
https://doi.org/10.1361/154770206X99343