Mechanics & Industry
Volume 16, Number 3, 2015
|Number of page(s)||6|
|Published online||19 March 2015|
Effect of alloying elements on the mechanical behavior and wear of austempered ductile iron
Foundry Laboratory, Faculty of Engineering Sciences, Badji Mokhtar University, 23000 Annaba, Algeria
a Corresponding author: firstname.lastname@example.org
Received: 9 June 2014
Accepted: 5 November 2014
This paper treats the effect of alloying elements on the modification of the microstructure and properties of austempered ductile iron. The basic cast iron was elaborated in an induction furnace, its solidification shows a ferrite-pearlitic structure. This cast iron was alloyed with Mn, Ni, Mo and V. The samples were cast in the form of cylindrical bars of 22 mm in diameter and 300 mm in length. They have undergone a bainitic heat treatment type. Microstructures were characterized by optical microscopy, “SEM” and “XRD”. Tensile strength, hardness, microhardness, resilience and wear were determined and correlated with the microstructure. In the treated condition, metallographic study shows that the structures were formed of bainitic ferrite and feathery upper ausferrite. The results of mechanical tests and wear show that the cast irons studied achieve superior properties.
© AFM, EDP Sciences 2015
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.