Mechanics & Industry

Open Access

Entropy production and mesh refinement – application to wave breaking 301

L. Yushchenko, F. Golay and M. Ersoy

Published online: 19 March 2015

DOI: https://doi.org/10.1051/meca/2015003

• Abstract
• PDF (1.027 MB)
• References

Open Access

Surface texturing effect comparative analysis in the hydrodynamic journal bearings 302

Nacer Tala-Ighil and Michel Fillon

Published online: 19 March 2015

DOI: https://doi.org/10.1051/meca/2015001

• Abstract
• PDF (1.691 MB)
• References

Open Access

Thermodynamic evaluation of gas compression station from the point of energy and exergy view with an approach to reduce energy consumptions and emissions: A case study 303

Mohammad Javadzadeh, Shahram Khalilarya, Samad Jafarmadar and Babak Amirkamvar

Published online: 19 March 2015

DOI: https://doi.org/10.1051/meca/2015083

• Abstract
• PDF (991.2 KB)
• References

Open Access

Effect of alloying elements on the mechanical behavior and wear of austempered ductile iron 304

Mohammed Iliasse Boulifa and Ali Hadji

Published online: 19 March 2015

DOI: https://doi.org/10.1051/meca/2015002

• Abstract
• PDF (1.111 MB)
• References

Open Access

Checking load sensing valves at vehicle inspections stations 305

Antonio González Carpena, Félix C. Gómez de León e Hijes, Mariano Alarcón García and Francisco Miguel Moral Moreno

Published online: 21 April 2015

DOI: https://doi.org/10.1051/meca/2015006

• Abstract
• PDF (1.313 MB)
• References

Open Access

Design of electrostatic actuators for suppressing vertical disturbances of CMOS-MEMS capacitive force sensors in bio applications 306

Reza Jalil Mozhdehi, Ali Selk Ghafari and Amir A.A. Khayyat

Published online: 21 April 2015

DOI: https://doi.org/10.1051/meca/2015008

• Abstract
• PDF (897.6 KB)
• References

Open Access

Development and statistical characterization of slug in two-phase flow along horizontal pipeline 307

I. Belgacem, Y. Salhi, M. Hammoudi, E.K. Si-Ahmed and J. Legrand

Published online: 21 April 2015

DOI: https://doi.org/10.1051/meca/2015007

• Abstract
• PDF (1.224 MB)
• References

Open Access

Investigation of dimensional accuracy in incremental sheet metal hammering process: a parametric study 308

A. Asgari, M. Sedighi and M. Riahi

Published online: 21 April 2015

DOI: https://doi.org/10.1051/meca/2015017

• Abstract
• PDF (1.207 MB)
• References

Open Access

Mesoscopic comparison of interface tool/workpiece for simulation by FEM of EN AW 1350 bulk forming alloy 309

Fakhreddine Kherouf, Smail Boutabba, Kamel Bey, Ameur Chettah and J.-C. Boyer

Published online: 21 April 2015

DOI: https://doi.org/10.1051/meca/2015004

• Abstract
• PDF (1.475 MB)
• References

Open Access

Free convection in a square enclosure with a finned plate 310

Djamel Sadaoui, Adel Sahi, Hamici Nadjib, Bachir Meziani and Tarik Amoura

Published online: 21 April 2015

DOI: https://doi.org/10.1051/meca/2015005

• Abstract
• PDF (2.377 MB)
• References