| Issue |
Mechanics & Industry
Volume 16, Number 7, 2015
STANKIN 85: advanced machining methods and techniques
|
|
|---|---|---|
| Article Number | 702 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/meca/2015086 | |
| Published online | 30 November 2015 | |
Investigation of force parameters acting on a single cutting insert made of ceramics in face milling of hardened steel
Moscow State University of Technology “STANKIN”,
1 Vadkovsky per., 127994
Moscow
GSP-4, Russian
Federation
a Corresponding author: science@stankin.ru
Received: 22 September 2015
Accepted: 2 October 2015
In the present paper, mathematical models for force parameters affecting single cutting insert made of oxide ceramics during finish milling of hardened steels are derived taking into account wear of inserts. Experiments showed that nitride Physical Vapor Deposition (VPD) coatings on oxide ceramics substrate CC6(Al2O3-TiC) produced by Moscow State University of Technology “STANKIN” provide at least 10% decrease of cutting forces. It was realized that cutting inserts wear influences the force parameters, especially axial force Px, that makes it possible to use those parameters as diagnosis indicators.
Key words: Milling / diagnosis / cutting ceramics / force parameters / coating / hardened steel
© AFM, EDP Sciences 2015
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.