Mechanics & Industry
Volume 19, Number 7, 2018
STANKIN: High-efficiency machining of innovative materials
|Number of page(s)||11|
|Published online||24 May 2019|
Application of roller burnishing technologies to improve the wear resistance of submerged pump parts made of powder alloys
Moscow State University of Technology “STANKIN”, 1 Vadkovsky per., GSP-4, Moscow 127994, Russian Federation
* e-mail: firstname.lastname@example.org
Accepted: 21 March 2019
This paper presents experimental studies of the influence of surface plastic deformation (SPD) (roller burnishing) on the properties of the surface layer of a part “guide apparatus” of the centrifugal submersible pump for oil production. The parts made of composite powder alloys based on the iron-copper system were taken as an object of researches. The microstructure of the surface layer of the samples, surface roughness, microhardness, and hardness were studied. Testing of the samples for the surface layer resistance to abrasive wear according to the Calotest method showed a decrease in the wear intensity by 1.5–1.6 times in comparison to samples without SPD.
Key words: Roller burnishing / wear / resistance / powder alloys / pump parts / microstructure / hardness
© E. Kropotkina et al., published by EDP Sciences 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.