Mechanics & Industry
Volume 20, Number 2, 2019
|Number of page(s)||7|
|Published online||19 April 2019|
Influence of piston-bore clearance on second motion characteristics of piston and skirt wear
Shanghai Volkswagen Powertrain Co. Ltd., Shanghai 201807, PR China
* e-mail: email@example.com
Accepted: 12 September 2018
The piston dynamic simulation was carried out for the wear of the piston skirt after the test of gasoline engine. In addition, the second motion and wear are studied for the improvement proposal of different cylinder clearances. Results show when the original cylinder clearance is 0.0325–0.0575 mm, the minimum operating clearance of the piston skirt is smaller; it is not good for the formation of lubrication oil film, which causes wear on the thrust side and anti-thrust side of piston skirt. When the cylinder clearance was increased to 0.0400–0.0650 mm, the wear load on the thrust side and anti-thrust side of piston skirt was reduced by 68.3% and 68.1%, respectively, the effect of improved wear is better and the result coincides well with engine test result.
Key words: Piston-bore clearance / piston dynamics / second motion / wear load
© AFM, EDP Sciences 2019
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.