Open Access
Table 1
Design parameters for CRC gear drive.
| Design parameters | Values |
|---|---|
| Module mn (mm) | 3 |
| Pressure angle at pitch point αP (°) | 22.81 |
| Tooth number of pinion Zp | 23 |
| Tooth number of gear Zg | 47 |
Addendum coefficient  |
1.0 |
| Pitch radius of pinion rp (mm) | 34.5 |
| Pitch radius of gear rg (mm) | 70.5 |
| Tooth width of pinion Bp (mm) | 25 |
| Tooth width of gear Bg (mm) | 20 |
| Contact ratio ε | 1.56 |
| Static transmission error εs (μm) | 0 |
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.