Open Access
Table 2
Material and lubricant parameters for CRC gear drive.
| Material and lubricant parameters | Values |
|---|---|
| Young's modulus of material E1,2(Pa) | 2.06E11 |
| Poisson’s ratio of material μ1,2 | 0.3 |
| Thermal conductivity of two contacting surfaces Λlim(W/(m K)) | 60.5 |
| Asperity friction coefficient fc | 0.11 |
| Limiting shear stress coefficient Λlim | 0.091 |
| Inlet viscosity η0 (Pas) | 0.35 |
| Vickers hardness v (Pa) | 2.3E9 |
| Surface roughness κ (m) | 3.0e-7 |
| Pressure–viscosity coefficient K(m2/N) | 2.5e-08 |
| Viscosity–pressure index z | 0.57 |
| Temperature–viscosity coefficient KT (K–1) | 0.045 |
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.