Open Access
| Issue |
Mécanique & Industries
Volume 5, Number 4, Juillet-Août 2004
|
|
|---|---|---|
| Page(s) | 451 - 459 | |
| DOI | https://doi.org/10.1051/meca:2004045 | |
| Published online | 28 September 2005 | |
- D.S. Zhou, G.J. Shiflet, Ferrite-cementite crystal- lography in pearlite, (1992) Metall. Trans. A 23A (1992) 1259–1269 [Google Scholar]
- P. Leduc, M. Janecek, E. de Courcy, D. Bouleau, J. Languillaume, N. Guelton, communication privée, IRSID, 1998 [Google Scholar]
- X. Sauvage, N. Guelton, D. Blavette, Microstructure evolutions during drawing of a pearlitic steele containing 0.7 at.% Copper, Scripta Mater. 46 (2002) 459–464 [CrossRef] [Google Scholar]
- M. Janecek, F. Louchet, B. Doisneau-Cottignies, Y. Bréchet, N. Guelton, Specific dislocation multiplication mechanisms and mechanical properties in nanoscaled multilayers: The example of pearlite, Phil. Mag. 80 (2000) 1605–1619 [Google Scholar]
- B. Pickering, The physical metallurgy and design of steels, Applied Sciences, Barking, 1978 [Google Scholar]
- B. Bonnefois, J.P. Bouichou, G. Brethenoux, J. Demurger, G. Flament, V. Gréjon, B. Lapostolle, P. Sécordel, La mise en forme à froid, in : Les Aciers Spéciaux, Ch. 30, Lavoisier Tec & Doc, 1997, pp. 921–987 [Google Scholar]
- R.E. Reed-Hill, Physical Metallurgy Principles, Ch. 16 (Deformation Twinning and Martensite Reactions), Litton Educational Publishing, 1973, pp. 611–660 [Google Scholar]
- J. Philibert, A. Vignes, Y. Bréchet, P. Combrade, Métallurgie : du minerai au matériau, Ch. 5, Masson, 1998, pp. 645–673 [Google Scholar]
- B. Thomas, M. Guttmann, Transformations et structures, in : Le Livre de l'Acier, Ch. 6, Lavoisier Tec & Doc, 1994, pp. 93–166 [Google Scholar]
- B. Thomas, J.H. Schmitt, Durcissement des aciers, Techniques de l'ingénieur, M4 341, 2002, pp. 1–20 [Google Scholar]
- A. Lambert, J. Drillet, T. Sturel, A.F. Gourgues, A. Pineau, Microstructure of Martensite-Austenite Constituents in heat affected zones of high strength low alloy steel welds in Relation to toughness Properties, Sci. Technol. Welding Joining 5 (2000) 168–173 [CrossRef] [Google Scholar]
- J. Cahn, Acta Metal. 4 (1956) 449 [Google Scholar]
- P. Buessler, O. Bouaziz, T. Iung, Modelling of mechanical properties and local deformation of high strength multi-phase steels, ECSC Final Report, 2001 [Google Scholar]
- J.L. Thirion, T. Hourman, D. Cornette, Press forming of dual phase high strength steels for autobody structural members parts, 40th Mechanical Working and Steel Processing Conference Proc. (Iron and Steel Society/AIME) 36 (1998) 35–51 [Google Scholar]
- G. Auclair, A. Badard, J. Bellus, M. Guttmann, T. Iung, A. Kirsch-Racine, H. Michaud, M.T. Perrot-Simonetta, Méthodes de caractérisation, in : Les Aciers Spéciaux, Ch. 10, Lavoisier Tec & Doc, 1997, pp. 335–376 [Google Scholar]
- P. Corneiller, Les traitements thermiques, in : Les Aciers Spéciaux, Ch. 33, Lavoisier Tec & Doc, 1997, pp. 1027–1059 [Google Scholar]
- H. Petitgand, H. Réglé, O. Bouaziz, T. Iung, S. Barrois, Modeling of grain growth and mechanical properties of IF steels, in : Proc. ISS Conf. IF Steels 2000, (Pittsburgh, USA), Pub. Iron & Steel Society, 2000, pp. 339–346 [Google Scholar]
- O. Hamart, T. Iung, S. Lanteri, Study of Mechanical Properties and Precipitation in High Strength IF Steels, 40th Mechanical Working and Steel Processing Conference Proc. (Iron and Steel Society/AIME) 36 (1998) 189–194 [Google Scholar]
- O. Bouaziz, P. Buessler, Mechanical behaviour of multiphase materials: An intermediate mixture law without fitting parameter, Revue de Métallurgie – CIT 99 (2002) 71–77 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.