Open Access
Issue |
Mécanique & Industries
Volume 5, Number 4, Juillet-Août 2004
|
|
---|---|---|
Page(s) | 441 - 450 | |
DOI | https://doi.org/10.1051/meca:2004044 | |
Published online | 28 September 2005 |
- Revue de Métallurgie, Science et Génie des Matériaux, Numéro spécial sur le thème Adhésion, adhérence, N° 5, Mai 1997 [Google Scholar]
- J.L. Chaboche, R. Girard, P. Levasseur, On the interface debonding models, Int. J. Damage Mechanics 6 (1997) 220–257 [Google Scholar]
- H.C. Cao, A.G. Evans, An experimental study of fracture resistance of bimaterial interfaces, Mechanics of Materials 7 (1989) 295–304 [CrossRef] [Google Scholar]
- J.S. Wang, Z. Suo, Experimental determination of interfacial toughness curves using brazil-nut-sandwiches, Acta Metal. Mater. 38 (1990) 1279–1290 [CrossRef] [Google Scholar]
- K.M. Liechti, Y.S. Chai, Asymmetric shielding in interfacial fracture under in-plane shear, J. Appl. Mechanics 59 (1992) 295–304 [CrossRef] [Google Scholar]
- N.P. O'Dowd, M.G. Stout, C.F. Shih, Fracture toughness of alumina-niobium interfaces: experiments and analyses, Phil. Mag. A 66 (1992) 1037–1064 [CrossRef] [Google Scholar]
- J. Dundurs, Discussion on: Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading, D.B. Bogy (ed.), J. Appl. Mechanics 36 (1969) 650–652 [Google Scholar]
- C.F. Shih, Cracks on bimaterial interfaces: elasticity and plasticity aspects, Mat. Sci. Eng. A 143 (1991) 77–90 [CrossRef] [Google Scholar]
- D. Leguillon, S. Bein, M. Dupeux, J. Frelat, Mixité modale pour une fissure d'interface ; application à l'essai brésilien, Revue Européenne des Éléments Finis 9(1-2-3) (2000) 263–276 [Google Scholar]
- J. Laurencin, M. Dupeux, D. Leguillon, Amorçage et propagation d'une fissure à l'interface d'un bi-matériau, Communication au Colloque de l'École de Mécanique Mecamat – Aussois 2002, Mécanismes et déformations dans les matériaux multiconstituants, Aussois, 21–25 Janvier 2002 [Google Scholar]
- A.K. Chouaf, G. Loppin, M. Ignat, J.M. Terriez, Analysis of stresses at singular points of patterned structures, Mat. Res. Soc. Symp. Proc. 309 (1993) 211–216 [CrossRef] [Google Scholar]
- D. Leguillon, K. Siruguet, Finite fracture mechanics – Application to the onset of a crack at a bimaterial corner, Proc. IUTAM Symp. on Analytical and computational fracture mechanics of non-homogeneous materials, Cardiff (UK), 18–22 June 2001, B.L. Karihaloo (ed.), Kluwer Acad. Press, Dordrecht, Germany, pp. 11–18 [Google Scholar]
- D. Leguillon, Strength or toughness ? A criterion for crack onset at a notch, Eur. J Mech. A/Solids 21 (2002) 61–72 [Google Scholar]
- J.E. Pawel, C.J. McHargue, Testing of adhesion of thin films to substrates, J. Adhesion Sci. Technol. 2(5) (1988) 369–383 [CrossRef] [Google Scholar]
- D.S. Rickerby, A review of the methods for the measurement of coating-substrate adhesion, Surf. Coatings Technol. 36 (1988) 541–557 [Google Scholar]
- P.A. Steinmann, H.E. Hintermann, A review of the mechanical tests for assessment of thin film adhesion, J. Vac. Sci. Technol. A7(3) (1989) 2267–2272 [Google Scholar]
- N.P. O'Dowd, C.F. Shih, M.G. Stout, Test geometries for measuring interfacial fracture toughness, Int. J. Solids Structures 29(5) (1992) 571–589 [CrossRef] [Google Scholar]
- C.K. Lin, C.C. Berndt, Measurement and analysis of adhesion strength for thermally sprayed coatings, J. Thermal Spray Technol. 3(1) (1994) 75–104 [CrossRef] [Google Scholar]
- H. Weiss, Adhesion of advanced overlay coatings : mechanisms and quantitative assessment, Surf. Coatings Technol. 71 (1995) 201–207 [CrossRef] [Google Scholar]
- A.A. Volinsky, N.R. Moody, W.W. Gerberich, Interfacial toughness measurements for thin films on substrates, Acta Mater. 50 (2002) 441–466 [Google Scholar]
- A. Bosseboeuf, M. Dupeux, M. Boutry, T. Bourouina, Bulge and Blister Test for Assessment of Coating Strength and Interfacial Adhesion: Experimental Challenge and Theoretical Tools, Proc. Int. Workshop on Mechanical behaviour of P.V.D. Coated Materials, 13–17 Oct. 1997, Holzau/Erzgebirge (All.), Techn. Univ. Bergakademie Freiberg, 1998, pp. 169–181 [Google Scholar]
- M. Dupeux, A. Bosseboeuf, T. Bourouina, D. Buttard, Investigation of the Mechanical Properties and Adhesion of P.V.D. Tungsten Films on Si and Silicon Compounds by Bulge and Blister tests, Mat. Res. Soc. Symp. Proc. Ser. 518 (1998) 87–92 [CrossRef] [Google Scholar]
- J. Mougin, M. Dupeux, A. Galerie, L. Antoni, Study of the adhesion of thermal oxide layers grown on several ferritic stainless steel using the inverted blister test, Mater. Sci. Technol. 18 (2002) 1217–1220 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.