EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 7 / No 2 (Mars-Avril 2006) Mécanique & Industries, 7 2 (2006) 111-122 References
Open Access
Issue
Mécanique & Industries
Volume 7, Number 2, Mars-Avril 2006
Page(s) 111 - 122
DOI https://doi.org/10.1051/meca:2006025
Published online 21 July 2006
  1. B. Braren, R. Srinivasan, Optical and photochemical factors which influence etching of polymers by ablative photodecomposition, J. Vac. Sci. B 3 (1985) 913–917 [CrossRef] [Google Scholar]
  2. R.W. Olson, W.C. Swope, Laser drilling with focused Gaussian beams, J. Appl. Phys. 72 (1992) 3686–3696 [CrossRef] [Google Scholar]
  3. M. Olfert, W.W. Duley, Holographic interferometry of isotherms during laser drilling of fused quartz, J. Phys. D: Appl. Phys. 29 (1996) 1140–1145 [Google Scholar]
  4. J.A. Clarke, T.S. Givens, J.T. Williamson, Laser drilling of diesel fuel injector nozzles, Lambda Highlights 62 (2003) 4–5 [Google Scholar]
  5. F. Dausinger, H. Hügel, V. Konov, Micro-machining with ultrashort laser pulses: from basic understanding to technical applications, Proc. SPIE 5147 (2003) 106 [CrossRef] [Google Scholar]
  6. C. Körner, R. Mayerhofer, M. Hartmann, H.W. Bergmann, Physical and material aspects in using visible laser pulses of nanosecond duration for ablation, Appl. Phys. A 63 (1996) 123 [Google Scholar]
  7. C. Paterson, A.S. Holmes, R.W. Smith, Excimer laser ablation of microstructures: A numerical model, J. Appl. Phys. 86 (1999) 6538 [CrossRef] [Google Scholar]
  8. A. Luft, U. Franz, A. Emsermann, J. Kaspar, A study of thermal and mechanical effects on materials induced by pulsed laser drilling, Appl. Phys. A 63 (1996) 93 [CrossRef] [Google Scholar]
  9. Y. Chen, H.Y. Zheng, K.S. Wong, S.C. Tam, Excimer laser drilling of polymers, Proc. SPIE 3184 (1997) 202 [CrossRef] [Google Scholar]
  10. N. Rykalin, A. Uglov, A. Kokora, Laser Machining and Welding (MIR, Moscou 1978) [Google Scholar]
  11. C. Lehane, H.S. Kwok, Enhanced drilling using a dual-pulse Nd:YAG laser, Appl. Phys. A 73 (2001) 45 [CrossRef] [Google Scholar]
  12. T. Otani, L. Herbst, M. Heglin, S.V. Govorkov, A.O. Wiessner, Microdrilling and micromachining with diode-pumped solid-state lasers, Appl. Phys. A 79 (2004) 1335 [Google Scholar]
  13. S. Lazare, J. Lopez, F. Weisbuch, High-aspect-ratio microdrilling in polymeric materials with intense KrF laser radiation, Appl. Phys. A 69 (1999) S1 [Google Scholar]
  14. J. Lopez, S. Lazare, Microperçage des polymères par laser à excimère, J. Phys. IV France 9 (1999) 153 [Google Scholar]
  15. J. Lopez, S. Lazare, F. Weisbuch, High aspect ratio microdrilling in polymeric materials with intense KrF laser radiation, Proc. SPIE 3822 (1999) 77 [CrossRef] [Google Scholar]
  16. V.N. Tokarev, J. Lopez, S. Lazare, Modelling high aspect ratio microdrilling of polymers with UV laser ablation, Appl. Surf. Sci. 168 (2000) 75 [CrossRef] [Google Scholar]
  17. V.N. Tokarev, J. Lopez, S. Lazare, F. Weisbuch, High aspect ratio microdrilling of polymers with UV laser ablation: experiment with analytical model, Appl. Phys. A 76 (2003) 385 [CrossRef] [Google Scholar]
  18. A.E. Siegman, Lasers, 6th ed., University Science Book, 1986 [Google Scholar]
  19. S. Lazare, V. Tokarev, Recent experimental and theoretical advances in microdrilling of polymers with ultraviolet laser beams, conférence invitée présentée au “Fifth International Symposium on Laser Precision Microfabrication, LPM04” (Nara, Japon, mai 2004), et publié en anglais dans I. Miyamoto, H. Helvajian, K. Itoh, K.F. Kobayashi, A. Ostendorf, K. Sugioka, (ed.), Proceedings of SPIE 5662 (2004) 221–231 [CrossRef] [Google Scholar]
  20. F. Weisbuch, S. Lazare, F.N. Goodall, D. Débarre, Submicron resolution ablation with a KrF excimer laser beam patterned with a projection lens, Appl. Phys. A 69 (1999) 413 [CrossRef] [Google Scholar]
  21. S. Lazare, P. Benet, Surface amorphization of Mylar films with the excimer laser radiation above and below ablation threshold: ellipsometric measurements, J. Appl. Phys. 74 (1993) 4953 [CrossRef] [Google Scholar]
  22. F. Weisbuch, V.N. Tokarev, S. Lazare, D. Débarre, Ablation with a single micropatterned KrF laser pulse: quantitative evidence of transient liquid microflow driven by the plume pressure gradient at the surface of polyesters, Appl. Phys. A 76 (2003) 613 [CrossRef] [Google Scholar]
  23. F. Weisbuch, V.N. Tokarev, S. Lazare, C. Belin, J.L. Bruneel, Millimeter long nanofibers of PMMA spun at super high speed by ablation with one pulse of the KrF excimer laser, Appl. Phys. A 75 (2002) 677 [CrossRef] [Google Scholar]
  24. F. Weisbuch, V.N. Tokarev, S. Lazare, C. Belin, J.L. Bruneel, Millimeter long PMMA nanofibers – A new form of material removal in laser ablation, Thin Solid Films 453–454 (2004) 394 [CrossRef] [Google Scholar]
  25. J. Lopez, Ablation profonde et microperçage de matériaux polymères par laser à excimères, Thèse de doctorat de l'Université de Bordeaux 1, 1997 [Google Scholar]
  26. E.G. Gamaly, A.V. Rode, B. Luther-Davis, Ultrafast ablation with high-pulse-rate lasers. Part I: Theoretical considerations, J. Appl. Phys. 85 (1999) 4213 [CrossRef] [Google Scholar]
  27. M.R.H. Knowles, Micro-ablation with high power pulsed copper vapor laser, Opt. Expr. 7 (2000) 50 [CrossRef] [Google Scholar]
  28. G. Kamlage, T. Bauer, A. Ostendorf, B.N. Chichkov, Deep drilling of metals by femtosecond laser pulses, Appl. Phys. A 77 (2003) 307 [Google Scholar]
  29. S. Juodkazis, H. Okuno, N. Kujime, S. Matsuo, H. Misawa, Hole drilling in stainless steel and silicon by femtosecond pulses at low pressure, Appl. Phys. A 79 (2004) 1555 [Google Scholar]
  30. L. Shah, J. Tawney, M. Richardson, K. Richardson, Femtosecond laser deep hole drilling of silicate glasses in air, Appl. Surf. Sci. 183 (2001) 151 [CrossRef] [Google Scholar]
  31. H. Varel, D. Ashkenasi, A. Rosenfeld, M. Wähmer, E.E.B. Campbell, Micromachining of quartz with ultrashort laser pulses, Appl. Phys. A 65 (1997) 367 [CrossRef] [Google Scholar]
  32. Y. Zhang, R.M. Lowe, E. Harvey, P. Hannaford, A. Endo, High aspect ratio micromachining of polymers with ultrafast laser, Appl. Surf. Sci. 186 (2002) 345 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.