Open Access
Issue
Mechanics & Industry
Volume 13, Number 5, 2012
Page(s) 337 - 346
DOI https://doi.org/10.1051/meca/2012041
Published online 08 February 2013
  1. H. Voss, K. Friedrich, The wear behavior of short fiber reinforced thermoplastics sliding against smooth steel surfaces, Wear Mater. 16 (1985) 742–750 [Google Scholar]
  2. K. Tanaka, S. Kawakami, Effect of various fillers on the friction and wear of PTFE-based composites, Wear 79 (1982) 221–234 [CrossRef] [Google Scholar]
  3. S. Bahadur, D. Gong, J.W. Anderegg, The role of copper compounds as fillers in transfer film formation and wear of nylon, Wear 154 (1992) 207–223 [CrossRef] [Google Scholar]
  4. S. Bahadur, The development of transfer layers and their role in polymer tribology, Wear 245 (2000) 92–99 [CrossRef] [Google Scholar]
  5. B. Briscoe, L.H. Yoo, T.A. Stolarski, The friction and wear of poly(tetrafluorethylene)–poly(etherketone) composites : an initial appraisal of the optimum, Wear 108 (1986) 357–374 [CrossRef] [Google Scholar]
  6. K.H. Hu, J. Wang, S. Schraube, Y.F. Xu, X.G. Huand, R. Stengler, Tribological properties of MoS2 nano-balls as filler in polyoxymethylene-based composite layer of three-layer self-lubrication bearing materials, Wear 266 (2009) 1198–1207 [CrossRef] [Google Scholar]
  7. Y. Ye, J. Chen, H. Zhou, An investigation of friction and wear performances of bonded molybdenum disulfide solid film lubricants in fretting conditions, Wear 266 (2009) 859–864 [CrossRef] [Google Scholar]
  8. P.Q. La, Q.J. Xue, W.M. Liu, A study of MoSi2–MoS2 coatings fabricated by SHS casting route, Mater. Sci. Eng. A 277 (2000) 266–273 [CrossRef] [Google Scholar]
  9. Y.W. Bae, W.Y. Lee, T.M. Besmann, C.S. Yust, P.J. Blau, Preparation and friction characteristics of self-lubricating TiN-MoS2 composite coatings, Mater. Sci. Eng. A 209 (1996) 372–376 [CrossRef] [Google Scholar]
  10. N. Hiraoka, Wear life mechanism of journal bearings with bonded MoS2 film lubricants in air and vacuum, Wear 249 (2002) 1014–1020 [CrossRef] [Google Scholar]
  11. C. Langlade, B. Vannes, M. Taillandier, M. Pierantoni, Fretting behavior of low-friction coatings : contribution to industrial selection, Tribol. Int. 34 (2001) 49–56 [CrossRef] [Google Scholar]
  12. J.F. Carton, A.B. Vannes, G. Zambelli, L. Vincent, An investigation of the fretting behaviour of low friction coatings on steel, Tribol. Int. 29 (1996) 445–455 [CrossRef] [Google Scholar]
  13. C.J. Beall, Solid film lubricants, Metal Finishing 98 (2000) 513–517 [CrossRef] [Google Scholar]
  14. K. Miyoshi, Durability evaluation of selected solid lubricating films, Wear 251 (2001) 1061–1067 [CrossRef] [Google Scholar]
  15. R. Gadow, D. Scherer, Composite coatings with dry lubrication ability on light metal substrates, Surface and Coatings Technology 151 (2002) 471–477 [CrossRef] [Google Scholar]
  16. J. Xu, M.H. Zhu, Z.R. Zhou, Ph. Kapsa, L. Vincent, An investigation on fretting wear life of bonded MoS2 solid lubricant coatings in complex condition, Wear 255 (2003) 253–358 [CrossRef] [Google Scholar]
  17. V. Fridrici, S. Fouvry, P. Kapsa, P. Perruchaut, Impact of contact size and geometry on the lifetime of a solid lubricant, Wear 255 (2003) 875–882 [CrossRef] [Google Scholar]
  18. S. Bahadur, D. Gong, The action of fillers in the modification of the tribological behavior of polymers, Wear 158 (1992) 41–58 [CrossRef] [Google Scholar]
  19. V. Pettarin, M.J. Churruca, D. Felhös, J. Karger-Kocsis, P.M. Frontini, Changes in tribological performance of high molecular weight high density polyethylene induced by the addition of molybdenum disulphide particles, Wear 269 (2010) 31–45 [CrossRef] [Google Scholar]
  20. X. Dangsheng, Lubrication behavior of Ni–Cr-based alloys containing MoS2 at high temperature, Wear 251 (2001) 1094–1099 [CrossRef] [Google Scholar]
  21. S.M. Aouadi, Y. Paudel, W.J. Simonson, Q. Ge, P. Kohli, C. Muratore, A.A. Voevodin, Tribological investigation of adaptive Mo2N/MoS2/Ag coatings with high sulfur content, Surf. Coatings Technol. 203 (2009) 1304–1309 [CrossRef] [Google Scholar]
  22. J. Bijwe, J. John Rajesh, A. Jeyakumar, A. Ghosh, U.S. Tewari, Influence of solid lubricants and fibre reinforcement on wear behaviour of polyethersulphone, Tribol. Int. 33 (2000) 697–706 [CrossRef] [Google Scholar]
  23. J. Bijwe, C.M. Logani, U.S. Tewari, Influence of fillers and fibre reinforcement on abrasive wear resistance of some polymeric composites, Wear 138 (1990) 77–92 [CrossRef] [Google Scholar]
  24. W. Liu, C. Huang, L. Gao, J. Wang, H. Dang, Study of the friction and wear properties of MoS2-filled nylon 6, Wear 151 (1991) 111–118 [CrossRef] [Google Scholar]
  25. Z. Jin, K.P. Pramoda, G. Xu, S.H. Goh, Dynamic mechanical behavior of melt-processed multi-walled carbon nanotube/poly(methyl methacrylate) composites, Chem. Phys. Lett. 337 (2001) 43–47 [CrossRef] [Google Scholar]
  26. R.P. Brown, Fractography and failure mechanisms of polymers and composites : By A. C. Roulin-Moloney. Elsevier Science Publishers, London, 1989, pp 540 + xix. ISBN 1-85166-296-0, Polymer Testing 10 (1991) 79 [CrossRef] [Google Scholar]
  27. G.E. Morris, Determining fracture directions and fracture origins on failed graphite/epoxy surfaces in non-destructive evaluation and flow criticality for composite materials, In : R.B. Pipes, Ed., ASTM STP, American Society for Testing and Materials STP 696, Philadelphia, 1979, pp. 274–297 [Google Scholar]
  28. D. Purslow, Some fundamental aspects of composites Fractography, Compos. 12 (1981) 241–247 [CrossRef] [Google Scholar]
  29. J. Vlassenbroeck, M. Diericka, B. Masschaele, V. Cnudde, L. Van Hoorebeke, P. Jacobs, Software tools for quantification of X-ray microtomography at the UGCT, Nuclear Instruments and Methods in Physics Research A 580 (2007) 442–445 [CrossRef] [Google Scholar]
  30. Hattotuwa G.B. Premalal, H. Ismail, A. Baharin, Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composites, Polymer Testing 21 (2002) 833–839 [CrossRef] [Google Scholar]
  31. N. Othman, H. Ismail, M. Mariatti, Effect of compatibilisers on mechanical and thermal properties of bentonite filled polypropylene composites, Polym. Degradation and Stability 91 (2006) 1761–1774 [CrossRef] [Google Scholar]
  32. C.C. Chamis, Composite Materials, ed. by E.P. Plueddemann, New York, 6, 1974 [Google Scholar]
  33. N. Phueakbuakhao, W. Prissanaroon-Ouajai, N. Kreua-Ongarjnukool, Effect of coupling agents on mechanical properties and morphology of CaCO3-filled Recycled high density polyethylene, J. Metals Mat. Minerals 18 (2008) 131–135 [Google Scholar]
  34. K. Yang, Q. Yang, G. Li, Y. Sun, D. Feng, Morphology and mechanical properties of polypropylene/calcium carbonate nanocomposites, J. Mater. Lett. 60 (2006) 805–809 [CrossRef] [Google Scholar]
  35. B. Ben Difallah, M. Kharrat, M. Dammak, G. Monteil, Mechanical and tribological response of ABS polymer matrix filled with graphite powder, Materials and Design 34 (2012) 782–787 [CrossRef] [Google Scholar]
  36. X.-R. Zhang, X.-Q. Pei, Q.-H. Wang, Friction and wear studies of polyimide composites filled with short carbon fibers and graphite and micro SiO2, Materials and Design 30 (2009) 4414–4420 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.