Open Access
Issue
Mechanics & Industry
Volume 16, Number 1, 2015
Article Number 108
Number of page(s) 9
DOI https://doi.org/10.1051/meca/2014074
Published online 28 November 2014
  1. W. Presz, Flexible Manufacturing System For Vibration Assisted Microforming, J. Achiev. Mater. Manuf. Eng. 21 (2007) 61–64 [Google Scholar]
  2. M. Hayashi, M. Jin, S. Thipprakmas, M. Murakawa, J.-C. Hung, Y.-C. Tsai, C.-H. Hung, Flexible Manufacturing System For Vibration Assisted Microforming, Simulation of ultrasonic-vibration drawing using the finite element method (FEM) 140 (2003) 30–35 [Google Scholar]
  3. K. Siegert, A. Mock, Wire drawing with ultrasonically oscillating dies, J. Mater. Proc. Technol. 60 (1996) 657–660 [CrossRef] [Google Scholar]
  4. K. Siegert, J. Ulmer, Superimposing Ultrasonic Waves on the Dies in Tube and Wire Drawing, J. Eng. Mater. Technol. 123 (2001) 517–523 [CrossRef] [Google Scholar]
  5. Y. Ashida, H. Aoyama, Press forming using ultrasonic vibration, J. Mater. Proc. Technol. 187 (2007) 118–122 [CrossRef] [Google Scholar]
  6. S.A.A. Akbari Mousavi, H. Feizi, R. Madoliat, Investigations on the effects of ultrasonic vibrations in the extrusion process, J. Mater. Proc. Technol. 187-188 (2007) 657–661 [CrossRef] [Google Scholar]
  7. M. Rosochowska, A. Rosochowski, FE simulation of ultrasonic back extrusion, ESAFORM Conference on Material Forming, 2007, pp. 564–569 [Google Scholar]
  8. V.C. Kumar, I.M. Hutchings, Reduction of the sliding friction of metals by the application of longitudinal or transverse ultrasonic vibration, Tribol. Int. 37 (2004) 833–840 [CrossRef] [Google Scholar]
  9. M. Lucas, Y. Daud, A finite element model of ultrasonic extrusion, J. Phys. 181 (2009) 012–027 [Google Scholar]
  10. K. Chen, N. Zhou, B. Liu, S. Wen, Effect of vibration extrusion on the structure and properties of high-density polyethylene pipes, Polym. Int. 58 (2009) 117–123 [CrossRef] [Google Scholar]
  11. S.A. Aziz, M. Lucas, The Effect of Ultrasonic Excitation in Metal Forming Tests, Appl. Mech. Mater. 24-25 (2010) 311–316 [CrossRef] [Google Scholar]
  12. M. Lucasa, Z. Huanga, M.J. Adams, Influence of ultrasonic upsetting of a model paste, Ultrasonics 40 (2002) 43–48 [CrossRef] [PubMed] [Google Scholar]
  13. J.-C. Hung, C. Hung, The influence of ultrasonic-vibration on hot upsetting of aluminium, Ultrasonic 43 (2000) 692–698 [CrossRef] [Google Scholar]
  14. Y. Daud, M. Lucas, Z. Huang, Modelling the effects of superimposed ultrasonic vibrations on tension and compression tests of aluminium, J. Mater. Proc. Technol. 186 (2007) 179–190 [CrossRef] [Google Scholar]
  15. Y. Daud, M. Lucas, Z. Huang, Superimposed ultrasonic oscillations in compression tests of aluminium, Ultrasonics 44 (2006) 511–515 [CrossRef] [Google Scholar]
  16. J.-C. Hung, Y.-C. Tsai, C. Hung, Frictional effect of ultrasonic-vibration on upsetting, Ultrasonics 46 (2007) 277–284 [CrossRef] [PubMed] [Google Scholar]
  17. N.V. Polyakov, N.V. Mikhailov, A Study of vibration-assisted deformation of metals, Fiziko-Khimicheskaya Mekhanika Materialov 2 (1966) 482–484 [Google Scholar]
  18. R. Ly, C. Giraud-Audine, G. Abba, R. Bigot, Experimentally validated approach for the simulation of the forging process using mechanical vibration, Int. J. Mater. Forming 2 (2009) 133–136 [CrossRef] [Google Scholar]
  19. R. Ly, C. Giraud-Audine, G. Abba, R. Bigot, Longitudinal vibrations modeling of a piezoelectric actuator used in forming process, Proceedings of the 2009 IEEE International Conference on Mechatronics, 2009 [Google Scholar]
  20. A. Khan, Integration and Optimization of vibration in Metal Forming Process, Ph.D. thesis, ENSAM Metz, 2013 [Google Scholar]
  21. K. Armaghan, C. Giraud-Audine, G. Abba, R. Bigot, Effects of Vibration on metal forming process: Analytical approach and finite element simulations, AIP Conf. Proc. 1315 (2011) 787–792 [CrossRef] [Google Scholar]
  22. T.H. Nguyen, C. Giraud-Audine, B. Lemaire-Semail, G. Abba, R. Bigot, Modelling of forging processes assisted by piezoelectric actuators: principles and experimental validation, IEEE Trans. Ind. Appl. 50 (2014) 244–252 [CrossRef] [Google Scholar]
  23. J. Zhi-hong, C. Gai-pin, Volume effect preparatory research of vibrational rotary forging, Proc. Mech. Automation Control Eng. (MACE) 24-25 (2010) 5621–5625 [Google Scholar]
  24. J. Zhi-hong, C. Gai-pin, Surface effect preparatory research of vibrational rotary forging, Adv. Mater. Res. 154-155 (2011) 1513–1517 [Google Scholar]
  25. M. Lucas, Z. Huang, M.J. Adams, Modeling wall boundary conditions in an elasto-viscoplastic material forming process, J. Mater. Proc. Technol. 107 (2000) 267–275 [CrossRef] [Google Scholar]
  26. J.C. Hung, Y.C. Tsai, C. Hung, Frictional effects of ultrasonic-vibration on upsetting, Ultrasonics 46 (2009) 277–284 [CrossRef] [PubMed] [Google Scholar]
  27. Y. Daud, M. Lucas, Z. Huang, Superimposed ultrasonic oscillations in compression tests of aluminium, Ultrasonics 44 (2006) 511–515 [CrossRef] [Google Scholar]
  28. Y. Daud, M. Lucas, Z. Huang, Modelling the effects of superimposed ultrasonic vibrations on tension and compression tests of aluminium, J. Mater. Proc. Technol. 186 (2007) 179–190 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.