EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 16 / No 1 (2015) Mechanics & Industry, 16 1 (2015) 111 References
Open Access
Issue
Mechanics & Industry
Volume 16, Number 1, 2015
Article Number 111
Number of page(s) 6
DOI https://doi.org/10.1051/meca/2014070
Published online 17 October 2014
  1. L. Castonguay, M. Dupuis, Simulation of Kitimat VS dry anodes with the ANSYSR◯finite element model, Rapport technique, Alcan International Ltd, 1986 [Google Scholar]
  2. F.J. Stevens, Energy balance and cell dynamics: considerations for cell design, operations and process control, Proceedings of the 6th Australasian Aluminum Smelting Workshop, Thomastown, Australia, 1998, pp. 289–320 [Google Scholar]
  3. K. Grjotheim, H. Kvande, Introduction to Aluminium Electrolysis, Understanding the Hall-Héroult Process, Aluminium-Verlag, Düsseldorf, 1993 [Google Scholar]
  4. K.A. Rye, T. Eidet, K. Torklep, Dynamic ledge response in Hall-Heroult cells, TMS Light Metals 1999, San Diego, USA, 1999, pp. 347–352 [Google Scholar]
  5. C. Bertrand, M. Désilets, G. Soucy, Experimental measurements within a phase change metallurgical reactor, Rev. Sci. Instrum. 82 (2011) 123902 [CrossRef] [PubMed] [Google Scholar]
  6. C. Bertrand, M.-A. Marois, M. Désilets, G. Soucy, M. Lacroix, A combined 2D inverse predictions and experimental analysis for the bank formation inside a metallurgical reactor, Int. J Heat Mass Trans. 59 (2013) 58–65 [CrossRef] [Google Scholar]
  7. M.-A. Marois, M. Désilets, M. Lacroix, Prediction of the Bank Formation in High Temperature Furnaces by a Sequential Inverse Analysis with Overlaps, Numer. Heat Transfer, Part A 60 (2011) 561–579 [Google Scholar]
  8. M.J. Banet, M. Fuchs, J.A. Rogers, J.H. Reinold, J.M. Knecht, M. Rothschild, R. Logan, A.A. Maznec, K.A. Nelson, High-precision film thickness determination using a laser-based ultrasonic technique, Appl. Phys. Lett. 73 (1998) 169–171 [CrossRef] [Google Scholar]
  9. M. Falkenstrom, M. Engman, E. Lindh-Ulmgren, B. Hutchinson, Laser ultrasonics for process control in the metal industry, Non Destr. Test. Eval. 26 (2011) 237–252 [Google Scholar]
  10. S. Dixon, C. Edwards, S.B. Palmer, High accuracy non-contact ultrasonic thickness gauging of aluminium sheet using electromagnetic acoustic transducers, Ultrasonics 39 (2001) 445–453 [CrossRef] [PubMed] [Google Scholar]
  11. T.E. Gomez Alvarez-Arenas, Simultaneous determination of the ultrasound velocity and the thickness of solid plates from the analysis of thickness resonances using air-coupled ultrasound, Ultrasonics 50 (2010) 104–109 [Google Scholar]
  12. S. Dixon, B. Lanyon, G. Rowlands, Coating thickness and elastic modulus measurement using ultrasonic bulk wave resonance, Appl. Phys. Lett. 88 (2006) 141907–1 [CrossRef] [Google Scholar]
  13. L. Jakevicius, J. Butkus, A. Vladisauskas, Measurement of thickness of layer and sound velocity in multi-layered structure by the use of angular ultrasonic transducers, Ultragarsas 58 (2006) 20–24 [Google Scholar]
  14. Y.H. Kim, S. Song, J. Lee, Simultaneous measurements of the ultrasonic wave velocity and thickness of a solid plate made from one side of the plate, Meas. Sci. Technol. 14 (2003) 13–16 [CrossRef] [Google Scholar]
  15. E.C. Brown, L. Mulvaney-Johnson, P.D. Coates, Ultrasonic measurement of residual wall thickness during gas assisted injection molding, Polym. Eng. Sci. 47 (2007) 1730–1739 [CrossRef] [Google Scholar]
  16. F.B. Cegla, J. Allin, J.O. Davies, P. Collins, P. Cawley, Ultrasonic wall thickness monitoring at high temperatures (500 C), Review of Progress in Quantitative Non destructive Evaluation 1335 (2011) 1325–1332, American Institute of Physics, USA [Google Scholar]
  17. M. LeBreux, M. Désilets, M. Lacroix, Fast Inverse Prediction of Phase Change Banks in High Temperature Furnaces with a Kalman Filter coupled with a Recursive Least-Square Estimator, Int. J. Heat Mass Trans. 53 (2010) 5250–5260 [CrossRef] [Google Scholar]
  18. M.-A. Marois, M. Désilets, M. Lacroix, Prediction of a 2D Solidification Front in High Temperature Furnaces by an Inverse Analysis, Numer. Heat Transfer, Part A 59 (2011) 151–166 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.